Peler

: / usr / share / snmp / mibs /
Filename : UCD-SNMP-MIB-OLD.txt
back
UCD-SNMP-MIB-OLD DEFINITIONS ::= BEGIN

--
--  This mib is a badly created mib which has been replaced by a more
--  properly created UCD-SNMP-MIB.  Use that mib instead.  This file
--  exists for historical purposes only and for use by people that
--  need to support both agent versions.
--

IMPORTS
	ucdavis
	    FROM UCD-SNMP-MIB
        OBJECT-TYPE 				
	    FROM SNMPv2-SMI
	DisplayString 				
	    FROM SNMPv2-TC
	Integer32
            FROM SNMPv2-SMI;

-- private	  OBJECT IDENTIFIER ::= { internet 4 }
-- enterprises    OBJECT IDENTIFIER ::= { private 1 }
-- ucdavis          OBJECT IDENTIFIER ::= { enterprises 2021 }
-- processes      OBJECT IDENTIFIER ::= { ucdavis 1 }
-- exec           OBJECT IDENTIFIER ::= { ucdavis 3 }
-- memory         OBJECT IDENTIFIER ::= { ucdavis 4 }
-- lockd          OBJECT IDENTIFIER ::= { ucdavis 5 }
-- disk           OBJECT IDENTIFIER ::= { ucdavis 6 }
-- load           OBJECT IDENTIFIER ::= { ucdavis 7 }
-- version        OBJECT IDENTIFIER ::= { ucdavis 100 }
-- snmperrs       OBJECT IDENTIFIER ::= { ucdavis 101 }
-- mibRegistryTable    OBJECT IDENTIFIER ::= { ucdavis 102 }

-- These are the returned values of the agent type.
-- returned to:  .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0 

-- The following section is commented out since it is defined in the
-- current UCD-SNMP-MIB

-- ucdSnmpAgent      OBJECT IDENTIFIER ::= { ucdavis 250 }
-- hpux9             OBJECT IDENTIFIER ::= { ucdSnmpAgent 1 }
-- hpux10            OBJECT IDENTIFIER ::= { ucdSnmpAgent 6 }
-- sunos4            OBJECT IDENTIFIER ::= { ucdSnmpAgent 2 }
-- solaris           OBJECT IDENTIFIER ::= { ucdSnmpAgent 3 }
-- osf               OBJECT IDENTIFIER ::= { ucdSnmpAgent 4 }
-- ultrix            OBJECT IDENTIFIER ::= { ucdSnmpAgent 5 }
-- netbsd1           OBJECT IDENTIFIER ::= { ucdSnmpAgent 7 }
-- freebsd           OBJECT IDENTIFIER ::= { ucdSnmpAgent 8 }
-- irix              OBJECT IDENTIFIER ::= { ucdSnmpAgent 9 }
-- linux             OBJECT IDENTIFIER ::= { ucdSnmpAgent 10 }
-- bsdi              OBJECT IDENTIFIER ::= { ucdSnmpAgent 11 }
-- unknown           OBJECT IDENTIFIER ::= { ucdSnmpAgent 255 }



Processes ::= SEQUENCE {
   processIndex  INTEGER,
   processNames  DisplayString,
   processMin    INTEGER,
   processMax    INTEGER,
   processCount  INTEGER,
   processErrorFlag  INTEGER,
   processErrMessage  DisplayString,
   processErrFix  INTEGER
}

processes OBJECT-TYPE
	SYNTAX SEQUENCE OF Processes
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A set of information on running programs/daemons."
	INDEX { processIndex }
	::= { ucdavis 1 }

processIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Reference Index for each observed process."
	::= { processes 1 }

processNames OBJECT-TYPE
	SYNTAX DisplayString  (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The table of process names we're Counting."
	::= { processes 2 }

processMin OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The minimum number of processes that should be
		running.  An error flag is generated if the number of
		running processes is < the minimum."
	::= { processes 3 }

processMax OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The maximum number of processes that should be
		running.  An error flag is generated if the number of
		running processes is > the maximum."
	::= { processes 4 }

processCount OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of current processes running with the name
		in question."
	::= { processes 5 }

processErrorFlag OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"A Error flag to indicate trouble with a process.  It
		goes to 1 if there is an error, 0 if no error."
	::= { processes 100 }

processErrMessage OBJECT-TYPE
	SYNTAX DisplayString  (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"An error message describing the problem (if one exists)."
	::= { processes 101 }

processErrFix OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Setting this to one will try to fix the problem if possible."
	::= { processes 102 }

extensible OBJECT-TYPE
	SYNTAX SEQUENCE OF Extensible
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"Extensible commands returning output and result codes."
	INDEX { extensibleIndex }
	::= { ucdavis 3 }

Extensible ::= SEQUENCE {
   extensibleIndex   INTEGER,
   extensibleNames   DisplayString,
   extensibleCommand DisplayString,
   extensibleResult  INTEGER,
   extensibleOutput  DisplayString,
   extensibleErrFix  INTEGER
}

extensibleIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Reference Index for extensible calls."
	::= { extensible 1 }

extensibleNames OBJECT-TYPE
	SYNTAX DisplayString  (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Short, one name descriptions of the extensible commands."
	::= { extensible 2 }

extensibleCommand OBJECT-TYPE
	SYNTAX DisplayString  (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The command line to be executed."
	::= { extensible 3 }

extensibleResult OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The result code from the executed command."
	::= { extensible 100 }

extensibleOutput OBJECT-TYPE
	SYNTAX DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The output of the extensible command (top line only)."
	::= { extensible 101 }

extensibleErrFix OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Set to 1 to fix the problem, if possible."
	::= { extensible 102 }
	
-- the following section is commented out because it is already
-- defined in the current UCD-SNMP-MIB
   
-- memory OBJECT-TYPE
-- 	SYNTAX Memory
-- 	ACCESS not-accessible
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Miscellanous stuff - memory related."
-- 	::= { ucdavis 4 }
-- 
-- Memory ::= SEQUENCE {
--    memIndex        INTEGER,
--    memErrorName    DisplayString,
--    memTotalSwap     INTEGER,
--    memAvailSwap     INTEGER,
--    memTotalReal     INTEGER,
--    memAvailReal     INTEGER,
--    memTotalSwapTXT     INTEGER,
--    memAvailSwapTXT     INTEGER,
--    memTotalRealTXT     INTEGER,
--    memAvailRealTXT     INTEGER,
--    memTotalFree       INTEGER,
--    memMinimumSwap       INTEGER,
--    memSwapError       DisplayString,
--    memShared          INTEGER,
--    memBuffer          INTEGER,
--    memCached          INTEGER
-- }
-- memIndex OBJECT-TYPE
--      SYNTAX  INTEGER
--      ACCESS  read-only
--      STATUS  mandatory
--      DESCRIPTION  
--           "Generic Index."
--      ::= { memory 1 } 
-- 
-- memErrorName OBJECT-TYPE
--      SYNTAX  DisplayString
--      ACCESS  read-only
--      STATUS  mandatory
--      DESCRIPTION  
--           "Bogus Name (swap) for consistancy with the rest of the mibs."
--      ::= { memory 2 } 
-- 
-- memTotalSwap OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Total Swap Size."
-- 	::= { memory 3 }
-- 
-- memAvailSwap OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Available Swap Space."
-- 	::= { memory 4 }
-- 
-- memTotalReal OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Total Real/Physical Memory Size."
-- 	::= { memory 5 }
-- 
-- memAvailReal OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Available Real/Physical Memory Space."
-- 	::= { memory 6 }
-- 
-- memTotalSwapTXT OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Total VM used by text."
-- 	::= { memory 7 }
-- 
-- memAvailSwapTXT OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Active VM used by text."
-- 	::= { memory 8 }
-- 
-- memTotalRealTXT OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Total Real/Physical Memory Size used by txt."
-- 	::= { memory 9 }
-- 
-- memAvailRealTXT OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Active Real/Physical Memory Space used by txt."
-- 	::= { memory 10 }
-- 
-- memTotalFree OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Total Available Memory"
-- 	::= { memory 11 }
-- 
-- memMinimumSwap OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Minimum amount of free swap.  Otherwise memErrorSwap
-- 		is set to 1 "
-- 	::= { memory 12 }
-- 
-- memShared OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Total Shared Memory"
-- 	::= { memory 13 }
-- 
-- memBuffer OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Total Buffered Memory"
-- 	::= { memory 14 }
-- 
-- memCached OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Total Cached Memory"
-- 	::= { memory 15 }
-- 
-- memSwapError OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Error flag.  1 indicates very little swap space left"
-- 	::= { memory 100 }
-- 	
-- memSwapErrorMsg OBJECT-TYPE
--      SYNTAX  DisplayString
--      ACCESS  read-only
--      STATUS  mandatory
--      DESCRIPTION  
--           "Error message describing the errorflag condition"
--      ::= { memory 101 } 
-- 
-- lockd OBJECT-TYPE
-- 	SYNTAX Lockd
-- 	ACCESS not-accessible
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Tests the functionality of the rpc.lockd/rpc.statd pair."
-- 	INDEX { lockdIndex }
-- 	::= { ucdavis 5 }

-- Lockd ::= SEQUENCE {
--    lockdIndex   INTEGER,
--    lockdError  INTEGER,
--    lockdErrorMsg  DisplayString
-- }
-- 
-- lockdIndex OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Reference Index for lockd calls."
-- 	::= { lockd 1 }
-- 
-- lockdError OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Error Flag.  > 0 indicates error"
-- 	::= { lockd 100 }
-- 
-- lockdErrorMsg OBJECT-TYPE
-- 	SYNTAX DisplayString (SIZE (0..255))
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Error message if something is wrong"
-- 	::= { lockd 101 }

disk 	OBJECT-TYPE
	SYNTAX SEQUENCE OF Disk
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"Disk watching information."
	INDEX { diskIndex }
	::= { ucdavis 6 }

Disk ::= SEQUENCE {
   diskIndex   INTEGER,
   diskPath  DisplayString,
   diskDevice  DisplayString,
   diskMinimum  INTEGER,
   diskMinPercent  INTEGER,
   diskTotal  INTEGER,
   diskAvail  INTEGER,
   diskUsed  INTEGER,
   diskPercent  INTEGER,
   diskErrorFlag  INTEGER,
   diskErrorMsg  DisplayString
}

diskIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Reference number for the Disk Mib."
	::= { disk 1 }
	
diskPath OBJECT-TYPE
     SYNTAX  DisplayString
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION  
          "Path where disk is mounted."
     ::= { disk 2 } 

diskDevice OBJECT-TYPE
     SYNTAX  DisplayString
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION  
          "Device path"
     ::= { disk 3 } 

diskMinimum OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION  
          "Minimum space required on the disk."
     ::= { disk 4 } 

diskMinPercent OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION  
          "Minimum percentage of space required on the disk."
     ::= { disk 5 } 

diskTotal OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION  
          "Total Disk Size (kbytes)"
     ::= { disk 6 } 

diskAvail OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION  
          "Available disk Space"
     ::= { disk 7 } 

diskUsed OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION  
          "Used Space on Disk"
     ::= { disk 8 } 

diskPercent OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION  
          "Percentage of space used on disk"
     ::= { disk 9 } 

diskErrorFlag OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION  
          "Error flag signaling disk is over minimum required space"
     ::= { disk 100 } 
     
diskErrorMsg OBJECT-TYPE
     SYNTAX  DisplayString
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION  
          "A text description of what caused the error flag to be set."
     ::= { disk 101 } 
     
loadaves OBJECT-TYPE
	SYNTAX SEQUENCE OF Loadaves
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"Load average information."
	INDEX { loadaveIndex }
	::= { ucdavis 7 }


Loadaves ::= SEQUENCE {
   loadaveIndex  INTEGER,
   loadaveNames  DisplayString,
   loadaveLoad   DisplayString,
   loadaveConfig DisplayString,
   loadaveErrorFlag  INTEGER,
   loadaveErrMessage  DisplayString
}

loadaveIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Reference Index for each observed loadave."
	::= { loadaves 1 }

loadaveNames OBJECT-TYPE
	SYNTAX DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The list of loadave names we're Counting."
	::= { loadaves 2 }

loadaveLoad OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The 1,5 and 10 minute load averages."
	::= { loadaves 3 }

loadaveConfig OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The watch point for loadaverages to signal an error."
	::= { loadaves 4 }

loadaveErrorFlag OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"A Error flag to indicate trouble with a loadave.  It
		goes to 1 if there is an error, 0 if no error."
	::= { loadaves 100 }

loadaveErrMessage OBJECT-TYPE
	SYNTAX DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"An error message describing the problem (if one exists)."
	::= { loadaves 101 }

-- the following section is commented out because it is already
-- defined in the current UCD-SNMP-MIB

-- version	OBJECT-TYPE
-- 	SYNTAX Version
-- 	ACCESS not-accessible
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"ece-snmpd version info."
-- 	INDEX { versionIndex }
-- 	::= { ucdavis 100 }
-- 
-- Version ::= SEQUENCE {
--    versionIndex   INTEGER,
--    versionTag  DisplayString,
--    versionDate  DisplayString,
--    versionCDate  DisplayString,
--    versionIdent  DisplayString,
--    versionClearCache  INTEGER,
--    versionUpdateConfig  INTEGER,
--    versionDoDebugging  INTEGER
-- }
--    
-- versionIndex OBJECT-TYPE
--      SYNTAX  INTEGER
--      ACCESS  read-only
--      STATUS  mandatory
--      DESCRIPTION  
--           "Index to mib (always 1)"
--      ::= { version 1 } 
-- 
-- versionTag OBJECT-TYPE
--      SYNTAX  DisplayString
--      ACCESS  read-only
--      STATUS  mandatory
--      DESCRIPTION  
--           "CVS tag keyword"
--      ::= { version 2 } 
--      
-- versionDate OBJECT-TYPE
--      SYNTAX  DisplayString
--      ACCESS  read-only
--      STATUS  mandatory
--      DESCRIPTION  
--           "Date string from RCS keyword"
--      ::= { version 3 } 
-- 
-- versionCDate OBJECT-TYPE
--      SYNTAX  DisplayString
--      ACCESS  read-only
--      STATUS  mandatory
--      DESCRIPTION  
--           "Date string from ctime() "
--      ::= { version 4 } 
-- 
-- versionIdent OBJECT-TYPE
--      SYNTAX  DisplayString
--      ACCESS  read-only
--      STATUS  mandatory
--      DESCRIPTION  
--           "Id string from RCS keyword"
--      ::= { version 5 } 
-- 
-- versionClearCache OBJECT-TYPE
--      SYNTAX  INTEGER
--      ACCESS  read-write
--      STATUS  mandatory
--      DESCRIPTION  
--           "Set to 1 to clear the exec cache, if enabled"
--      ::= { version 10 } 
-- 
-- versionUpdateConfig OBJECT-TYPE
--      SYNTAX  INTEGER
--      ACCESS  read-write
--      STATUS  mandatory
--      DESCRIPTION  
--           "Set to 1 to read-read the config file(s)."
--      ::= { version 11 } 
-- 
-- versionRestartAgent OBJECT-TYPE
--      SYNTAX  INTEGER
--      ACCESS  read-write
--      STATUS  mandatory
--      DESCRIPTION  
--           "Set to 1 to restart the agent."
--      ::= { version 12 } 
-- 
-- versionDoDebugging OBJECT-TYPE
--      SYNTAX  INTEGER
--      ACCESS  read-write
--      STATUS  mandatory
--      DESCRIPTION  
--           "Set to 1 to turn debugging statements on in the agent."
--      ::= { version 20 } 
-- 

-- the following section is commented out because it is already
-- defined in the current UCD-SNMP-MIB

-- snmperrs OBJECT-TYPE
-- 	SYNTAX Snmperrs
-- 	ACCESS not-accessible
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"A place for the agent to report problems."
-- 	INDEX { snmperrIndex }
-- 	::= { ucdavis 101 }
-- 
-- 
-- Snmperrs ::= SEQUENCE {
--    snmperrIndex  INTEGER,
--    snmperrNames  DisplayString,
--    snmperrErrorFlag  INTEGER,
--    snmperrErrMessage  DisplayString
-- }
-- 
-- snmperrIndex OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"Reference Index for each observed snmperr."
-- 	::= { snmperrs 1 }
-- 
-- snmperrNames OBJECT-TYPE
-- 	SYNTAX DisplayString (SIZE (0..255))
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"snmp"
-- 	::= { snmperrs 2 }
-- 
-- snmperrErrorFlag OBJECT-TYPE
-- 	SYNTAX INTEGER
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"A Error flag to indicate trouble with the agent.  It
-- 		goes to 1 if there is an error, 0 if no error."
-- 	::= { snmperrs 100 }
-- 
-- snmperrErrMessage OBJECT-TYPE
-- 	SYNTAX DisplayString (SIZE (0..255))
-- 	ACCESS read-only
-- 	STATUS mandatory
-- 	DESCRIPTION
-- 		"An error message describing the problem (if one exists)."
-- 	::= { snmperrs 101 }
-- 
END