ProPeler
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
usr
/
share
/
snmp
/
mibs
/
ietf
/
Filename :
MPLS-LC-FR-STD-MIB
back
Copy
MPLS-LC-FR-STD-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF RowStatus, StorageType FROM SNMPv2-TC mplsInterfaceIndex FROM MPLS-LSR-STD-MIB DLCI FROM FRAME-RELAY-DTE-MIB mplsStdMIB FROM MPLS-TC-STD-MIB ; mplsLcFrStdMIB MODULE-IDENTITY LAST-UPDATED "200601120000Z" -- 12 January 2006 ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group" CONTACT-INFO " Thomas D. Nadeau Cisco Systems, Inc. Email: tnadeau@cisco.com Subrahmanya Hegde Email: subrah@cisco.com General comments should be sent to mpls@uu.net " DESCRIPTION "This MIB module contains managed object definitions for MPLS Label-Controlled Frame-Relay interfaces as defined in (RFC3034). Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4368; see the RFC itself for full legal notices." -- Revision history. REVISION "200601120000Z" -- 12 January 2006 DESCRIPTION "Initial revision, published as part of RFC 4368." ::= { mplsStdMIB 10 } -- Top level components of this MIB module. -- Tables, Scalars, Notifications, Conformance mplsLcFrStdNotifications OBJECT IDENTIFIER ::= { mplsLcFrStdMIB 0 } mplsLcFrStdObjects OBJECT IDENTIFIER ::= { mplsLcFrStdMIB 1 } mplsLcFrStdConformance OBJECT IDENTIFIER ::= { mplsLcFrStdMIB 2 } -- MPLS LC-FR Interface Configuration Table. mplsLcFrStdInterfaceConfTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLcFrStdInterfaceConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies per-interface MPLS LC-FR capability and associated information. In particular, this table sparsely extends the MPLS-LSR-STD-MIB's mplsInterfaceConfTable." ::= { mplsLcFrStdObjects 1 } mplsLcFrStdInterfaceConfEntry OBJECT-TYPE SYNTAX MplsLcFrStdInterfaceConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created by an LSR for every interface capable of supporting MPLS LC-FR. Each entry in this table will exist only if a corresponding entry in ifTable and mplsInterfaceConfTable exists. If the associated entries in ifTable and mplsInterfaceConfTable are deleted, the corresponding entry in this table must also be deleted shortly thereafter." INDEX { mplsInterfaceIndex } ::= { mplsLcFrStdInterfaceConfTable 1 } MplsLcFrStdInterfaceConfEntry ::= SEQUENCE { mplsLcFrStdTrafficMinDlci DLCI, mplsLcFrStdTrafficMaxDlci DLCI, mplsLcFrStdCtrlMinDlci DLCI, mplsLcFrStdCtrlMaxDlci DLCI, mplsLcFrStdInterfaceConfRowStatus RowStatus, mplsLcFrStdInterfaceConfStorageType StorageType } mplsLcFrStdTrafficMinDlci OBJECT-TYPE SYNTAX DLCI MAX-ACCESS read-create STATUS current DESCRIPTION "This is the minimum DLCI value over which this LSR is willing to accept traffic on this interface." ::= { mplsLcFrStdInterfaceConfEntry 1 } mplsLcFrStdTrafficMaxDlci OBJECT-TYPE SYNTAX DLCI MAX-ACCESS read-create STATUS current DESCRIPTION "This is the max DLCI value over which this LSR is willing to accept traffic on this interface." ::= { mplsLcFrStdInterfaceConfEntry 2 } mplsLcFrStdCtrlMinDlci OBJECT-TYPE SYNTAX DLCI MAX-ACCESS read-create STATUS current DESCRIPTION "This is the min DLCI value over which this LSR is willing to accept control traffic on this interface." ::= { mplsLcFrStdInterfaceConfEntry 3 } mplsLcFrStdCtrlMaxDlci OBJECT-TYPE SYNTAX DLCI MAX-ACCESS read-create STATUS current DESCRIPTION "This is the max DLCI value over which this LSR is willing to accept control traffic on this interface." ::= { mplsLcFrStdInterfaceConfEntry 4 } mplsLcFrStdInterfaceConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create and delete entries in this table. When configuring entries in this table, the corresponding ifEntry and mplsInterfaceConfEntry MUST exist beforehand. If a manager attempts to create an entry for a corresponding mplsInterfaceConfEntry that does not support LC-FR, the agent MUST return an inconsistentValue error. If this table is implemented read-only, then the agent must set this object to active(1) when this row is made active. If this table is implemented writable, then an agent MUST not allow modification to its objects once this value is set to active(1), except to mplsLcFrStdInterfaceConfRowStatus and mplsLcFrStdInterfaceConfStorageType." ::= { mplsLcFrStdInterfaceConfEntry 5 } mplsLcFrStdInterfaceConfStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { mplsLcFrStdInterfaceConfEntry 6 } -- End of mplsLcFrStdInterfaceConfTable -- Module compliance. mplsLcFrStdCompliances OBJECT IDENTIFIER ::= { mplsLcFrStdConformance 1 } mplsLcFrStdGroups OBJECT IDENTIFIER ::= { mplsLcFrStdConformance 2 } -- Compliance requirement for full compliance mplsLcFrStdModuleFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for agents that provide full support for MPLS-LC-FR-STD-MIB. Such devices can be monitored and also be configured using this MIB module." MODULE -- this module MANDATORY-GROUPS { mplsLcFrStdIfGroup } OBJECT mplsLcFrStdInterfaceConfRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { active(1), notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notReady is not required." ::= { mplsLcFrStdCompliances 1 } -- Compliance requirement for read-only implementations. mplsLcFrStdModuleReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance requirement for implementations that only provide read-only support for MPLS-LC-FR-STD-MIB. Such devices can be monitored but cannot be configured using this MIB module. " MODULE -- this module MANDATORY-GROUPS { mplsLcFrStdIfGroup } -- mplsLcFrStdInterfaceConfTable OBJECT mplsLcFrStdTrafficMinDlci MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsLcFrStdTrafficMaxDlci MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsLcFrStdCtrlMinDlci MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsLcFrStdCtrlMaxDlci MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsLcFrStdInterfaceConfRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsLcFrStdInterfaceConfStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { mplsLcFrStdCompliances 2 } -- Units of conformance. mplsLcFrStdIfGroup OBJECT-GROUP OBJECTS { mplsLcFrStdTrafficMinDlci, mplsLcFrStdTrafficMaxDlci, mplsLcFrStdCtrlMinDlci, mplsLcFrStdCtrlMaxDlci, mplsLcFrStdInterfaceConfRowStatus, mplsLcFrStdInterfaceConfStorageType } STATUS current DESCRIPTION "Collection of objects needed for MPLS LC-FR interface configuration." ::= { mplsLcFrStdGroups 1 } END