ProPeler
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
usr
/
share
/
snmp
/
mibs
/
ietf
/
Filename :
FIBRE-CHANNEL-FE-MIB
back
Copy
FIBRE-CHANNEL-FE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32, Gauge32, Integer32, mib-2 FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, TimeStamp FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- rfc2571 MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; fcFeMIB MODULE-IDENTITY LAST-UPDATED "200005180000Z" ORGANIZATION "IETF IPFC Working Group" CONTACT-INFO "Kha Sin Teow Brocade Communications Systems, 1901 Guadalupe Parkway, San Jose, CA 95131 U.S.A Tel: +1 408 487 8180 Fax: +1 408 487 8190 Email: khasin@Brocade.COM WG Mailing list:ipfc@standards.gadzoox.com To Subscribe: ipfc-request@standards.gadzoox.com In Body: subscribe" DESCRIPTION "The MIB module for Fibre Channel Fabric Element." REVISION "200005180000Z" DESCRIPTION "Initial revision, published as RFC 2837." ::= { mib-2 75 } fcFeMIBObjects OBJECT IDENTIFIER ::= { fcFeMIB 1 } -- Note: -- fcFeMIBConformance OBJECT IDENTIFIER ::= { fcFeMIB 2 } -- see at the end of the module -- Groups under fcFeMIBObjects fcFeConfig OBJECT IDENTIFIER ::= { fcFeMIBObjects 1 } fcFeStatus OBJECT IDENTIFIER ::= { fcFeMIBObjects 2 } fcFeError OBJECT IDENTIFIER ::= { fcFeMIBObjects 3 } fcFeAccounting OBJECT IDENTIFIER ::= { fcFeMIBObjects 4 } fcFeCapabilities OBJECT IDENTIFIER ::= { fcFeMIBObjects 5 } -- Textual Conventions MilliSeconds ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents time unit value in milliseconds." SYNTAX Unsigned32 MicroSeconds ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents time unit value in microseconds." SYNTAX Unsigned32 FcNameId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the Worldwide Name associated with a Fibre Channel (FC) entity." SYNTAX OCTET STRING (SIZE (8)) FcAddressId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents Fibre Channel Address ID, a 24-bit value unique within the address space of a Fabric." SYNTAX OCTET STRING (SIZE (3)) FcRxDataFieldSize ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the receive data field size of an NxPort or FxPort." SYNTAX Integer32 (128..2112) FcBbCredit ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the buffer-to-buffer credit of an NxPort or FxPort." SYNTAX Integer32 (0..32767) FcphVersion ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the version of FC-PH supported by an NxPort or FxPort." SYNTAX Integer32 (0..255) FcStackedConnMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents an enumerated value used to indicate the Class 1 Stacked Connect Mode supported by an NxPort or FxPort." SYNTAX INTEGER { none(1), transparent(2), lockedDown(3) } FcCosCap ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the class of service capability of an NxPort or FxPort." SYNTAX BITS { classF(0), class1(1), class2(2), class3(3), class4(4), class5(5), class6(6) } FcFeModuleCapacity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the maximum number of modules within a Fabric Element." SYNTAX Unsigned32 FcFeFxPortCapacity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the maximum number of FxPorts within a module." SYNTAX Unsigned32 FcFeModuleIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the module index within a conceptual table." SYNTAX Unsigned32 FcFeFxPortIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the FxPort index within a conceptual table." SYNTAX Unsigned32 FcFeNxPortIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the NxPort index within a conceptual table." SYNTAX Integer32 (1..126) FcBbCreditModel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the BB_Credit model of an FxPort." SYNTAX INTEGER { regular(1), alternate (2) } -- The Configuration group -- This group consists of scalar objects and tables. -- It contains the configuration and service parameters -- of the Fabric Element and the FxPorts. -- The group represents a set of parameters associated with -- the Fabric Element or an FxPort to support its NxPorts. fcFeFabricName OBJECT-TYPE SYNTAX FcNameId MAX-ACCESS read-write STATUS current DESCRIPTION "The Name_Identifier of the Fabric to which this Fabric Element belongs." ::= { fcFeConfig 1 } fcFeElementName OBJECT-TYPE SYNTAX FcNameId MAX-ACCESS read-write STATUS current DESCRIPTION "The Name_Identifier of the Fabric Element." ::= { fcFeConfig 2 } fcFeModuleCapacity OBJECT-TYPE SYNTAX FcFeModuleCapacity MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of modules in the Fabric Element, regardless of their current state." ::= { fcFeConfig 3 } -- The Module Table. -- This table contains one entry for each module, -- information of the modules. fcFeModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF FcFeModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains, one entry for each module in the Fabric Element, information of the modules." ::= { fcFeConfig 4 } fcFeModuleEntry OBJECT-TYPE SYNTAX FcFeModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing the configuration parameters of a module." INDEX { fcFeModuleIndex } ::= { fcFeModuleTable 1 } FcFeModuleEntry ::= SEQUENCE { fcFeModuleIndex FcFeModuleIndex, fcFeModuleDescr SnmpAdminString, fcFeModuleObjectID OBJECT IDENTIFIER, fcFeModuleOperStatus INTEGER, fcFeModuleLastChange TimeStamp, fcFeModuleFxPortCapacity FcFeFxPortCapacity, fcFeModuleName FcNameId } fcFeModuleIndex OBJECT-TYPE SYNTAX FcFeModuleIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the module within the Fabric Element for which this entry contains information. This value is never greater than fcFeModuleCapacity." ::= { fcFeModuleEntry 1 } fcFeModuleDescr OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of the module. This value should include the full name and version identification of the module." ::= { fcFeModuleEntry 2 } fcFeModuleObjectID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor's authoritative identification of the module. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forward and unambiguous means for determining what kind of module is being managed. For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor 'Neufe Inc.' was assigned the subtree 1.3.6.1.4.1.99649, and had assigned the identifier 1.3.6.1.4.1.99649.3.9 to its 'FeFiFo-16 PlugInCard.'" ::= { fcFeModuleEntry 3 } fcFeModuleOperStatus OBJECT-TYPE SYNTAX INTEGER { online (1), -- functional offline (2), -- not available testing (3), -- under testing faulty (4) -- defective } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the operational status of the module: online(1) the module is functioning properly; offline(2) the module is not available; testing(3) the module is under testing; and faulty(4) the module is defective in some way." ::= { fcFeModuleEntry 4 } fcFeModuleLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the value of sysUpTime when the module entered its current operational status. A value of zero indicates that the operational status of the module has not changed since the agent last restarted." ::= { fcFeModuleEntry 5 } fcFeModuleFxPortCapacity OBJECT-TYPE SYNTAX FcFeFxPortCapacity MAX-ACCESS read-only STATUS current DESCRIPTION "The number of FxPort that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity inclusive. However, the numbers are not required to be contiguous." ::= { fcFeModuleEntry 6 } fcFeModuleName OBJECT-TYPE SYNTAX FcNameId MAX-ACCESS read-write STATUS current DESCRIPTION "The Name_Identifier of the module." ::= { fcFeModuleEntry 7 } -- the FxPort Configuration Table. -- This table contains, one entry for each FxPort, -- configuration parameters of the ports. fcFxPortTable OBJECT-TYPE SYNTAX SEQUENCE OF FcFxPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains, one entry for each FxPort in the Fabric Element, configuration and service parameters of the FxPorts." ::= { fcFeConfig 5 } fcFxPortEntry OBJECT-TYPE SYNTAX FcFxPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing the configuration and service parameters of a FxPort." INDEX { fcFeModuleIndex, fcFxPortIndex } ::= { fcFxPortTable 1 } FcFxPortEntry ::= SEQUENCE { fcFxPortIndex FcFeFxPortIndex, fcFxPortName FcNameId, -- FxPort common service parameters fcFxPortFcphVersionHigh FcphVersion, fcFxPortFcphVersionLow FcphVersion, fcFxPortBbCredit FcBbCredit, fcFxPortRxBufSize FcRxDataFieldSize, fcFxPortRatov MilliSeconds, fcFxPortEdtov MilliSeconds, -- FxPort class service parameters fcFxPortCosSupported FcCosCap, fcFxPortIntermixSupported TruthValue, fcFxPortStackedConnMode FcStackedConnMode, fcFxPortClass2SeqDeliv TruthValue, fcFxPortClass3SeqDeliv TruthValue, -- other configuration parameters fcFxPortHoldTime MicroSeconds } fcFxPortIndex OBJECT-TYPE SYNTAX FcFeFxPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized." ::= { fcFxPortEntry 1 } fcFxPortName OBJECT-TYPE SYNTAX FcNameId MAX-ACCESS read-only STATUS current DESCRIPTION "The World_wide Name of this FxPort. Each FxPort has a unique Port World_wide Name within the Fabric." ::= { fcFxPortEntry 2 } -- FxPort common service parameters fcFxPortFcphVersionHigh OBJECT-TYPE SYNTAX FcphVersion MAX-ACCESS read-only STATUS current DESCRIPTION "The highest or most recent version of FC-PH that the FxPort is configured to support." ::= { fcFxPortEntry 3 } fcFxPortFcphVersionLow OBJECT-TYPE SYNTAX FcphVersion MAX-ACCESS read-only STATUS current DESCRIPTION "The lowest or earliest version of FC-PH that the FxPort is configured to support." ::= { fcFxPortEntry 4 } fcFxPortBbCredit OBJECT-TYPE SYNTAX FcBbCredit UNITS "buffers" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of receive buffers available for holding Class 1 connect-request, Class 2 or 3 frames from the attached NxPort. It is for buffer-to-buffer flow control in the direction from the attached NxPort (if applicable) to FxPort." ::= { fcFxPortEntry 5 } fcFxPortRxBufSize OBJECT-TYPE SYNTAX FcRxDataFieldSize UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the FxPort." ::= { fcFxPortEntry 6 } fcFxPortRatov OBJECT-TYPE SYNTAX MilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The Resource_Allocation_Timeout Value configured for the FxPort. This is used as the timeout value for determining when to reuse an NxPort resource such as a Recovery_Qualifier. It represents E_D_TOV (see next object) plus twice the maximum time that a frame may be delayed within the Fabric and still be delivered." ::= { fcFxPortEntry 7 } fcFxPortEdtov OBJECT-TYPE SYNTAX MilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The E_D_TOV value configured for the FxPort. The Error_Detect_Timeout Value is used as the timeout value for detecting an error condition." ::= { fcFxPortEntry 8 } -- FxPort class service parameters fcFxPortCosSupported OBJECT-TYPE SYNTAX FcCosCap MAX-ACCESS read-only STATUS current DESCRIPTION "A value indicating the set of Classes of Service supported by the FxPort." ::= { fcFxPortEntry 9 } fcFxPortIntermixSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A flag indicating whether or not the FxPort supports an Intermixed Dedicated Connection." ::= { fcFxPortEntry 10 } fcFxPortStackedConnMode OBJECT-TYPE SYNTAX FcStackedConnMode MAX-ACCESS read-only STATUS current DESCRIPTION "A value indicating the mode of Stacked Connect supported by the FxPort." ::= { fcFxPortEntry 11 } fcFxPortClass2SeqDeliv OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A flag indicating whether or not Class 2 Sequential Delivery is supported by the FxPort." ::= { fcFxPortEntry 12 } fcFxPortClass3SeqDeliv OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A flag indicating whether or not Class 3 Sequential Delivery is supported by the FxPort." ::= { fcFxPortEntry 13 } -- other FxPort parameters fcFxPortHoldTime OBJECT-TYPE SYNTAX MicroSeconds UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum time (in microseconds) that the FxPort shall hold a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that the FxPort does not support this parameter." ::= { fcFxPortEntry 14 } -- the Status group -- This group consists of tables that contains operational -- status and established service parameters for the Fabric -- Element and the attached NxPorts. -- The FxPort Status table -- This table contains, one entry for each FxPort, -- the operational status and parameters of the FxPorts. fcFxPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF FcFxPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains, one entry for each FxPort in the Fabric Element, operational status and parameters of the FxPorts." ::= { fcFeStatus 1 } fcFxPortStatusEntry OBJECT-TYPE SYNTAX FcFxPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing operational status and parameters of a FxPort." AUGMENTS { fcFxPortEntry } ::= { fcFxPortStatusTable 1 } FcFxPortStatusEntry ::= SEQUENCE { fcFxPortID FcAddressId, fcFxPortBbCreditAvailable Gauge32, fcFxPortOperMode INTEGER, fcFxPortAdminMode INTEGER } fcFxPortID OBJECT-TYPE SYNTAX FcAddressId MAX-ACCESS read-only STATUS current DESCRIPTION "The address identifier by which this FxPort is identified within the Fabric. The FxPort may assign its address identifier to its attached NxPort(s) during Fabric Login." ::= { fcFxPortStatusEntry 1 } fcFxPortBbCreditAvailable OBJECT-TYPE SYNTAX Gauge32 UNITS "buffers" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit." ::= { fcFxPortStatusEntry 2 } fcFxPortOperMode OBJECT-TYPE SYNTAX INTEGER { unknown(1), fPort(2), flPort(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational mode of the FxPort." ::= { fcFxPortStatusEntry 3 } fcFxPortAdminMode OBJECT-TYPE SYNTAX INTEGER { fPort(2), flPort(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired operational mode of the FxPort." ::= { fcFxPortStatusEntry 4 } -- the FxPort Physical Level table -- This table contains, one entry for each FxPort in the -- Fabric Element, the physical level status and parameters -- of the FxPorts. fcFxPortPhysTable OBJECT-TYPE SYNTAX SEQUENCE OF FcFxPortPhysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains, one entry for each FxPort in the Fabric Element, physical level status and parameters of the FxPorts." ::= { fcFeStatus 2 } fcFxPortPhysEntry OBJECT-TYPE SYNTAX FcFxPortPhysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing physical level status and parameters of a FxPort." AUGMENTS { fcFxPortEntry } ::= { fcFxPortPhysTable 1 } FcFxPortPhysEntry ::= SEQUENCE { fcFxPortPhysAdminStatus INTEGER, fcFxPortPhysOperStatus INTEGER, fcFxPortPhysLastChange TimeStamp, fcFxPortPhysRttov MilliSeconds } fcFxPortPhysAdminStatus OBJECT-TYPE SYNTAX INTEGER { online (1), -- place port online offline (2), -- take port offline testing (3) -- initiate test procedures } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired state of the FxPort. A management station may place the FxPort in a desired state by setting this object accordingly. The testing(3) state indicates that no operational frames can be passed. When a Fabric Element initializes, all FxPorts start with fcFxPortPhysAdminStatus in the offline(2) state. As the result of either explicit management action or per configuration information accessible by the Fabric Element, fcFxPortPhysAdminStatus is then changed to either the online(1) or testing(3) states, or remains in the offline state." ::= { fcFxPortPhysEntry 1 } fcFxPortPhysOperStatus OBJECT-TYPE SYNTAX INTEGER { online (1), -- Login may proceed offline (2), -- Login cannot proceed testing (3), -- port is under test linkFailure (4) -- failure after online/testing } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status of the FxPort. The testing(3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline(2) then fcFxPortPhysOperStatus should be offline(2). If fcFxPortPhysAdminStatus is changed to online(1) then fcFxPortPhysOperStatus should change to online(1) if the FxPort is ready to accept Fabric Login request from the attached NxPort; it should proceed and remain in the link- failure(4) state if and only if there is a fault that prevents it from going to the online(1) state." ::= { fcFxPortPhysEntry 2 } fcFxPortPhysLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the FxPort entered its current operational status. A value of zero indicates that the FxPort's operational status has not changed since the agent last restarted." ::= { fcFxPortPhysEntry 3 } fcFxPortPhysRttov OBJECT-TYPE SYNTAX MilliSeconds UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The Receiver_Transmitter_Timeout value of the FxPort. This is used by the receiver logic to detect Loss of Synchronization." ::= { fcFxPortPhysEntry 4 } -- The FxPort Fabric Login table -- -- This table contains, one entry for each FxPort in the -- Fabric Element, the Service Parameters that have been -- established from the most recent Fabric Login, -- implicit or explicit. fcFxLoginTable OBJECT-TYPE SYNTAX SEQUENCE OF FcFxLoginEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains, one entry for each NxPort attached to a particular FxPort in the Fabric Element, services parameters established from the most recent Fabric Login, explicit or implicit. Note that an FxPort may have one or more NxPort attached to it." ::= { fcFeStatus 3 } fcFxLoginEntry OBJECT-TYPE SYNTAX FcFxLoginEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing service parameters established from a successful Fabric Login." INDEX { fcFeModuleIndex, fcFxPortIndex, fcFxPortNxLoginIndex } ::= { fcFxLoginTable 1 } FcFxLoginEntry ::= SEQUENCE { fcFxPortNxLoginIndex FcFeNxPortIndex, fcFxPortFcphVersionAgreed FcphVersion, fcFxPortNxPortBbCredit FcBbCredit, fcFxPortNxPortRxDataFieldSize FcRxDataFieldSize, fcFxPortCosSuppAgreed FcCosCap, fcFxPortIntermixSuppAgreed TruthValue, fcFxPortStackedConnModeAgreed FcStackedConnMode, fcFxPortClass2SeqDelivAgreed TruthValue, fcFxPortClass3SeqDelivAgreed TruthValue, -- fcFxPortNxPortName FcNameId, fcFxPortConnectedNxPort FcAddressId, fcFxPortBbCreditModel FcBbCreditModel } fcFxPortNxLoginIndex OBJECT-TYPE SYNTAX FcFeNxPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object identifies the associated NxPort in the attachment for which the entry contains information." ::= { fcFxLoginEntry 1 } fcFxPortFcphVersionAgreed OBJECT-TYPE SYNTAX FcphVersion MAX-ACCESS read-only STATUS current DESCRIPTION "The version of FC-PH that the FxPort has agreed to support from the Fabric Login" ::= { fcFxLoginEntry 2 } fcFxPortNxPortBbCredit OBJECT-TYPE SYNTAX FcBbCredit UNITS "buffers" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames to be transmitted to the attached NxPort. It is for buffer-to- buffer flow control in the direction from FxPort to NxPort. The buffer-to-buffer flow control mechanism is indicated in the respective fcFxPortBbCreditModel." ::= { fcFxLoginEntry 3 } fcFxPortNxPortRxDataFieldSize OBJECT-TYPE SYNTAX FcRxDataFieldSize UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Receive Data Field Size of the attached NxPort. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the NxPort." ::= { fcFxLoginEntry 4 } fcFxPortCosSuppAgreed OBJECT-TYPE SYNTAX FcCosCap MAX-ACCESS read-only STATUS current DESCRIPTION "A variable indicating that the attached NxPort has requested the FxPort for the support of classes of services and the FxPort has granted the request." ::= { fcFxLoginEntry 5 } fcFxPortIntermixSuppAgreed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A variable indicating that the attached NxPort has requested the FxPort for the support of Intermix and the FxPort has granted the request. This flag is only valid if Class 1 service is supported." ::= { fcFxLoginEntry 6 } fcFxPortStackedConnModeAgreed OBJECT-TYPE SYNTAX FcStackedConnMode MAX-ACCESS read-only STATUS current DESCRIPTION "A variable indicating whether the FxPort has agreed to support stacked connect from the Fabric Login. This is only meaningful if Class 1 service has been agreed." ::= { fcFxLoginEntry 7 } fcFxPortClass2SeqDelivAgreed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A variable indicating whether the FxPort has agreed to support Class 2 sequential delivery from the Fabric Login. This is only meaningful if Class 2 service has been agreed." ::= { fcFxLoginEntry 8 } fcFxPortClass3SeqDelivAgreed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A flag indicating whether the FxPort has agreed to support Class 3 sequential delivery from the Fabric Login. This is only meaningful if Class 3 service has been agreed." ::= { fcFxLoginEntry 9 } fcFxPortNxPortName OBJECT-TYPE SYNTAX FcNameId MAX-ACCESS read-only STATUS current DESCRIPTION "The port name of the attached NxPort." ::= { fcFxLoginEntry 10 } fcFxPortConnectedNxPort OBJECT-TYPE SYNTAX FcAddressId MAX-ACCESS read-only STATUS current DESCRIPTION "The address identifier of the destination NxPort with which this FxPort is currently engaged in a either a Class 1 or loop connection. If this FxPort is not engaged in a connection, then the value of this object is '000000'H." ::= { fcFxLoginEntry 11 } fcFxPortBbCreditModel OBJECT-TYPE SYNTAX FcBbCreditModel MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the BB_Credit model used by the FxPort." ::= { fcFxLoginEntry 12 } -- the Error group -- This group consists of tables that contain information about -- the various types of errors detected. The management station -- may use the information in this group to determine the -- quality of the link between the FxPort and its attached NxPort. -- the FxPort Error table -- This table contains, one entry for each FxPort in the Fabric -- Element, counters recording numbers of errors detected -- since the management agent re-initialized. -- The first 6 columnar objects after the port index corresponds -- to the counters in the Link Error Status Block. fcFxPortErrorTable OBJECT-TYPE SYNTAX SEQUENCE OF FcFxPortErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains, one entry for each FxPort, counters that record the numbers of errors detected." ::= { fcFeError 1 } fcFxPortErrorEntry OBJECT-TYPE SYNTAX FcFxPortErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing error counters of a FxPort." AUGMENTS { fcFxPortEntry } ::= { fcFxPortErrorTable 1 } FcFxPortErrorEntry ::= SEQUENCE { fcFxPortLinkFailures Counter32, fcFxPortSyncLosses Counter32, fcFxPortSigLosses Counter32, fcFxPortPrimSeqProtoErrors Counter32, fcFxPortInvalidTxWords Counter32, fcFxPortInvalidCrcs Counter32, fcFxPortDelimiterErrors Counter32, fcFxPortAddressIdErrors Counter32, fcFxPortLinkResetIns Counter32, fcFxPortLinkResetOuts Counter32, fcFxPortOlsIns Counter32, fcFxPortOlsOuts Counter32 } fcFxPortLinkFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of link failures detected by this FxPort." ::= { fcFxPortErrorEntry 1 } fcFxPortSyncLosses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of loss of synchronization detected by the FxPort." ::= { fcFxPortErrorEntry 2 } fcFxPortSigLosses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of loss of signal detected by the FxPort." ::= { fcFxPortErrorEntry 3 } fcFxPortPrimSeqProtoErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of primitive sequence protocol errors detected by the FxPort." ::= { fcFxPortErrorEntry 4 } fcFxPortInvalidTxWords OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid transmission word detected by the FxPort." ::= { fcFxPortErrorEntry 5 } fcFxPortInvalidCrcs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid CRC detected by this FxPort." ::= { fcFxPortErrorEntry 6 } fcFxPortDelimiterErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Delimiter Errors detected by this FxPort." ::= { fcFxPortErrorEntry 7 } fcFxPortAddressIdErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of address identifier errors detected by this FxPort." ::= { fcFxPortErrorEntry 8 } fcFxPortLinkResetIns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Link Reset Protocol received by this FxPort from the attached NxPort." ::= { fcFxPortErrorEntry 9 } fcFxPortLinkResetOuts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Link Reset Protocol issued by this FxPort to the attached NxPort." ::= { fcFxPortErrorEntry 10 } fcFxPortOlsIns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Offline Sequence received by this FxPort." ::= { fcFxPortErrorEntry 11 } fcFxPortOlsOuts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Offline Sequence issued by this FxPort." ::= { fcFxPortErrorEntry 12 } -- Accounting Groups: -- (1) Class 1 Accounting Group, -- (2) Class 2 Accounting Group, and -- (3) Class 3 Accounting Group. -- Each group consists of a table that contains accounting -- information for the FxPorts in the Fabric Element. -- the Class 1 Accounting table -- This table contains, one entry for each FxPort in the Fabric -- Element, Counter32s for certain types of events occurred in the -- the FxPorts since the the management agent has re-initialized. fcFxPortC1AccountingTable OBJECT-TYPE SYNTAX SEQUENCE OF FcFxPortC1AccountingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains, one entry for each FxPort in the Fabric Element, Class 1 accounting information recorded since the management agent has re-initialized." ::= { fcFeAccounting 1 } fcFxPortC1AccountingEntry OBJECT-TYPE SYNTAX FcFxPortC1AccountingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing Class 1 accounting information for each FxPort." AUGMENTS { fcFxPortEntry } ::= { fcFxPortC1AccountingTable 1 } FcFxPortC1AccountingEntry ::= SEQUENCE { fcFxPortC1InFrames Counter32, fcFxPortC1OutFrames Counter32, fcFxPortC1InOctets Counter32, fcFxPortC1OutOctets Counter32, fcFxPortC1Discards Counter32, fcFxPortC1FbsyFrames Counter32, fcFxPortC1FrjtFrames Counter32, fcFxPortC1InConnections Counter32, fcFxPortC1OutConnections Counter32, fcFxPortC1ConnTime MilliSeconds } fcFxPortC1InFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 1 frames (other than Class 1 connect- request) received by this FxPort from its attached NxPort." ::= { fcFxPortC1AccountingEntry 1 } fcFxPortC1OutFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 1 frames (other than Class 1 connect- request) delivered through this FxPort to its attached NxPort." ::= { fcFxPortC1AccountingEntry 2 } fcFxPortC1InOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 1 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort." ::= { fcFxPortC1AccountingEntry 3 } fcFxPortC1OutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 1 frame octets, including the frame delimiters, delivered through this FxPort its attached NxPort." ::= { fcFxPortC1AccountingEntry 4 } fcFxPortC1Discards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 1 frames discarded by this FxPort." ::= { fcFxPortC1AccountingEntry 5 } fcFxPortC1FbsyFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of F_BSY frames generated by this FxPort against Class 1 connect-request." ::= { fcFxPortC1AccountingEntry 6 } fcFxPortC1FrjtFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of F_RJT frames generated by this FxPort against Class 1 connect-request." ::= { fcFxPortC1AccountingEntry 7 } fcFxPortC1InConnections OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 1 connections successfully established in which the attached NxPort is the source of the connect- request." ::= { fcFxPortC1AccountingEntry 8 } fcFxPortC1OutConnections OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 1 connections successfully established in which the attached NxPort is the destination of the connect-request." ::= { fcFxPortC1AccountingEntry 9 } fcFxPortC1ConnTime OBJECT-TYPE SYNTAX MilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative time that this FxPort has been engaged in Class 1 connection. The amount of time is counted from after a connect-request has been accepted until the connection is disengaged, either by an EOFdt or Link Reset." ::= { fcFxPortC1AccountingEntry 10 } -- the Class 2 Accounting table -- This table contains, one entry for each FxPort in the Fabric -- Element, Counter32s for certain types of events occurred in the -- the FxPorts since the the management agent has re-initialized. fcFxPortC2AccountingTable OBJECT-TYPE SYNTAX SEQUENCE OF FcFxPortC2AccountingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains, one entry for each FxPort in the Fabric Element, Class 2 accounting information recorded since the management agent has re-initialized." ::= { fcFeAccounting 2 } fcFxPortC2AccountingEntry OBJECT-TYPE SYNTAX FcFxPortC2AccountingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing Class 2 accounting information for each FxPort." AUGMENTS { fcFxPortEntry } ::= { fcFxPortC2AccountingTable 1 } FcFxPortC2AccountingEntry ::= SEQUENCE { fcFxPortC2InFrames Counter32, fcFxPortC2OutFrames Counter32, fcFxPortC2InOctets Counter32, fcFxPortC2OutOctets Counter32, fcFxPortC2Discards Counter32, fcFxPortC2FbsyFrames Counter32, fcFxPortC2FrjtFrames Counter32 } fcFxPortC2InFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 2 frames received by this FxPort from its attached NxPort." ::= { fcFxPortC2AccountingEntry 1 } fcFxPortC2OutFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 2 frames delivered through this FxPort to its attached NxPort." ::= { fcFxPortC2AccountingEntry 2 } fcFxPortC2InOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 2 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort." ::= { fcFxPortC2AccountingEntry 3 } fcFxPortC2OutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 2 frame octets, including the frame delimiters, delivered through this FxPort to its attached NxPort." ::= { fcFxPortC2AccountingEntry 4 } fcFxPortC2Discards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 2 frames discarded by this FxPort." ::= { fcFxPortC2AccountingEntry 5 } fcFxPortC2FbsyFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of F_BSY frames generated by this FxPort against Class 2 frames." ::= { fcFxPortC2AccountingEntry 6 } fcFxPortC2FrjtFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of F_RJT frames generated by this FxPort against Class 2 frames." ::= { fcFxPortC2AccountingEntry 7 } -- the Class 3 Accounting Group -- This table contains, one entry for each FxPort in the Fabric -- Element, Counter32s for certain types of events occurred in the -- the FxPorts since the management agent has re-initialized. fcFxPortC3AccountingTable OBJECT-TYPE SYNTAX SEQUENCE OF FcFxPortC3AccountingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains, one entry for each FxPort in the Fabric Element, Class 3 accounting information recorded since the management agent has re-initialized." ::= { fcFeAccounting 3 } fcFxPortC3AccountingEntry OBJECT-TYPE SYNTAX FcFxPortC3AccountingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing Class 3 accounting information for each FxPort." AUGMENTS { fcFxPortEntry } ::= { fcFxPortC3AccountingTable 1 } FcFxPortC3AccountingEntry ::= SEQUENCE { fcFxPortC3InFrames Counter32, fcFxPortC3OutFrames Counter32, fcFxPortC3InOctets Counter32, fcFxPortC3OutOctets Counter32, fcFxPortC3Discards Counter32 } fcFxPortC3InFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 3 frames received by this FxPort from its attached NxPort." ::= { fcFxPortC3AccountingEntry 1 } fcFxPortC3OutFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 3 frames delivered through this FxPort to its attached NxPort." ::= { fcFxPortC3AccountingEntry 2 } fcFxPortC3InOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 3 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort." ::= { fcFxPortC3AccountingEntry 3 } fcFxPortC3OutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 3 frame octets, including the frame delimiters, delivered through this FxPort to its attached NxPort." ::= { fcFxPortC3AccountingEntry 4 } fcFxPortC3Discards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Class 3 frames discarded by this FxPort." ::= { fcFxPortC3AccountingEntry 5 } -- The Capability Group - consists of a table describing -- information about what each FxPort is inherently capable -- of operating or supporting. -- A capability may be used, as expressed in its respective -- object value in the Configuration group. fcFxPortCapTable OBJECT-TYPE SYNTAX SEQUENCE OF FcFxPortCapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains, one entry for each FxPort, the capabilities of the port within the Fabric Element." ::= { fcFeCapabilities 1 } fcFxPortCapEntry OBJECT-TYPE SYNTAX FcFxPortCapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing the Cap of a FxPort." AUGMENTS { fcFxPortEntry } ::= { fcFxPortCapTable 1 } FcFxPortCapEntry ::= SEQUENCE { fcFxPortCapFcphVersionHigh FcphVersion, fcFxPortCapFcphVersionLow FcphVersion, fcFxPortCapBbCreditMax FcBbCredit, fcFxPortCapBbCreditMin FcBbCredit, fcFxPortCapRxDataFieldSizeMax FcRxDataFieldSize, fcFxPortCapRxDataFieldSizeMin FcRxDataFieldSize, fcFxPortCapCos FcCosCap, fcFxPortCapIntermix TruthValue, fcFxPortCapStackedConnMode FcStackedConnMode, fcFxPortCapClass2SeqDeliv TruthValue, fcFxPortCapClass3SeqDeliv TruthValue, fcFxPortCapHoldTimeMax MicroSeconds, fcFxPortCapHoldTimeMin MicroSeconds } fcFxPortCapFcphVersionHigh OBJECT-TYPE SYNTAX FcphVersion MAX-ACCESS read-only STATUS current DESCRIPTION "The highest or most recent version of FC-PH that the FxPort is capable of supporting." ::= { fcFxPortCapEntry 1 } fcFxPortCapFcphVersionLow OBJECT-TYPE SYNTAX FcphVersion MAX-ACCESS read-only STATUS current DESCRIPTION "The lowest or earliest version of FC-PH that the FxPort is capable of supporting." ::= { fcFxPortCapEntry 2 } fcFxPortCapBbCreditMax OBJECT-TYPE SYNTAX FcBbCredit UNITS "buffers" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of receive buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames from the attached NxPort." ::= { fcFxPortCapEntry 3 } fcFxPortCapBbCreditMin OBJECT-TYPE SYNTAX FcBbCredit UNITS "buffers" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum number of receive buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames from the attached NxPort." ::= { fcFxPortCapEntry 4 } fcFxPortCapRxDataFieldSizeMax OBJECT-TYPE SYNTAX FcRxDataFieldSize UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort." ::= { fcFxPortCapEntry 5 } fcFxPortCapRxDataFieldSizeMin OBJECT-TYPE SYNTAX FcRxDataFieldSize UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort." ::= { fcFxPortCapEntry 6 } fcFxPortCapCos OBJECT-TYPE SYNTAX FcCosCap MAX-ACCESS read-only STATUS current DESCRIPTION "A value indicating the set of Classes of Service that the FxPort is capable of supporting." ::= { fcFxPortCapEntry 7 } fcFxPortCapIntermix OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A flag indicating whether or not the FxPort is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 service." ::= { fcFxPortCapEntry 8 } fcFxPortCapStackedConnMode OBJECT-TYPE SYNTAX FcStackedConnMode MAX-ACCESS read-only STATUS current DESCRIPTION "A value indicating the mode of Stacked Connect request that the FxPort is capable of supporting." ::= { fcFxPortCapEntry 9 } fcFxPortCapClass2SeqDeliv OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A flag indicating whether or not the FxPort is capable of supporting Class 2 Sequential Delivery." ::= { fcFxPortCapEntry 10 } fcFxPortCapClass3SeqDeliv OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A flag indicating whether or not the FxPort is capable of supporting Class 3 Sequential Delivery." ::= { fcFxPortCapEntry 11 } fcFxPortCapHoldTimeMax OBJECT-TYPE SYNTAX MicroSeconds UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum holding time (in microseconds) that the FxPort is capable of supporting." ::= { fcFxPortCapEntry 12 } fcFxPortCapHoldTimeMin OBJECT-TYPE SYNTAX MicroSeconds UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum holding time (in microseconds) that the FxPort is capable of supporting." ::= { fcFxPortCapEntry 13 } -- conformance information fcFeMIBConformance OBJECT IDENTIFIER ::= { fcFeMIB 2 } fcFeMIBCompliances OBJECT IDENTIFIER ::= { fcFeMIBConformance 1 } fcFeMIBGroups OBJECT IDENTIFIER ::= { fcFeMIBConformance 2 } -- compliance statements fcFeMIBMinimumCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The minimum compliance statement for SNMP entities which implement the FIBRE-CHANNEL-FE-MIB." MODULE -- this module MANDATORY-GROUPS { fcFeConfigGroup, fcFeStatusGroup, fcFeErrorGroup } OBJECT fcFeFabricName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT fcFeElementName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT fcFeModuleName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT fcFxPortAdminMode MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT fcFxPortPhysAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT fcFxPortPhysRttov MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT fcFxPortBbCreditModel MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { fcFeMIBCompliances 1 } fcFeMIBFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The full compliance statement for SNMP entities which implement the FIBRE-CHANNEL-FE-MIB." MODULE -- this module MANDATORY-GROUPS { fcFeConfigGroup, fcFeStatusGroup, fcFeErrorGroup, fcFeCapabilitiesGroup } GROUP fcFeClass1AccountingGroup DESCRIPTION "This group is mandatory for all fibre channel fabric elements which support class 1 frames." GROUP fcFeClass2AccountingGroup DESCRIPTION "This group is mandatory for all fibre channel fabric elements which support class 2 frames." GROUP fcFeClass3AccountingGroup DESCRIPTION "This group is mandatory for all fibre channel fabric elements which support class 3 frames." OBJECT fcFeFabricName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT fcFeElementName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT fcFeModuleName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT fcFxPortAdminMode MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT fcFxPortPhysAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT fcFxPortPhysRttov MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT fcFxPortBbCreditModel MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { fcFeMIBCompliances 2 } -- units of conformance fcFeConfigGroup OBJECT-GROUP OBJECTS { fcFeFabricName, fcFeElementName, fcFeModuleCapacity, fcFeModuleDescr, fcFeModuleObjectID, fcFeModuleOperStatus, fcFeModuleLastChange, fcFeModuleFxPortCapacity, fcFeModuleName, fcFxPortName, fcFxPortFcphVersionHigh, fcFxPortFcphVersionLow, fcFxPortBbCredit, fcFxPortRxBufSize, fcFxPortRatov, fcFxPortEdtov, fcFxPortCosSupported, fcFxPortIntermixSupported, fcFxPortStackedConnMode, fcFxPortClass2SeqDeliv, fcFxPortClass3SeqDeliv, fcFxPortHoldTime } STATUS current DESCRIPTION "A collection of objects providing the configuration and service parameters of the Fabric Element, the modules, and FxPorts." ::= { fcFeMIBGroups 1 } fcFeStatusGroup OBJECT-GROUP OBJECTS { fcFxPortID, fcFxPortBbCreditAvailable, fcFxPortOperMode, fcFxPortAdminMode, fcFxPortPhysAdminStatus, fcFxPortPhysOperStatus, fcFxPortPhysLastChange, fcFxPortPhysRttov, fcFxPortFcphVersionAgreed, fcFxPortNxPortBbCredit, fcFxPortNxPortRxDataFieldSize, fcFxPortCosSuppAgreed, fcFxPortIntermixSuppAgreed, fcFxPortStackedConnModeAgreed, fcFxPortClass2SeqDelivAgreed, fcFxPortClass3SeqDelivAgreed, fcFxPortNxPortName, fcFxPortConnectedNxPort, fcFxPortBbCreditModel } STATUS current DESCRIPTION "A collection of objects providing the operational status and established service parameters for the Fabric Element and the attached NxPorts." ::= { fcFeMIBGroups 2 } fcFeErrorGroup OBJECT-GROUP OBJECTS { fcFxPortLinkFailures, fcFxPortSyncLosses, fcFxPortSigLosses, fcFxPortPrimSeqProtoErrors, fcFxPortInvalidTxWords, fcFxPortInvalidCrcs, fcFxPortDelimiterErrors, fcFxPortAddressIdErrors, fcFxPortLinkResetIns, fcFxPortLinkResetOuts, fcFxPortOlsIns, fcFxPortOlsOuts } STATUS current DESCRIPTION "A collection of objects providing various error statistics detected by the FxPorts." ::= { fcFeMIBGroups 3 } fcFeClass1AccountingGroup OBJECT-GROUP OBJECTS { fcFxPortC1InFrames, fcFxPortC1OutFrames, fcFxPortC1InOctets, fcFxPortC1OutOctets, fcFxPortC1Discards, fcFxPortC1FbsyFrames, fcFxPortC1FrjtFrames, fcFxPortC1InConnections, fcFxPortC1OutConnections, fcFxPortC1ConnTime } STATUS current DESCRIPTION "A collection of objects providing various class 1 performance statistics detected by the FxPorts." ::= { fcFeMIBGroups 4 } fcFeClass2AccountingGroup OBJECT-GROUP OBJECTS { fcFxPortC2InFrames, fcFxPortC2OutFrames, fcFxPortC2InOctets, fcFxPortC2OutOctets, fcFxPortC2Discards, fcFxPortC2FbsyFrames, fcFxPortC2FrjtFrames } STATUS current DESCRIPTION "A collection of objects providing various class 2 performance statistics detected by the FxPorts." ::= { fcFeMIBGroups 5 } fcFeClass3AccountingGroup OBJECT-GROUP OBJECTS { fcFxPortC3InFrames, fcFxPortC3OutFrames, fcFxPortC3InOctets, fcFxPortC3OutOctets, fcFxPortC3Discards } STATUS current DESCRIPTION "A collection of objects providing various class 3 performance statistics detected by the FxPorts." ::= { fcFeMIBGroups 6 } fcFeCapabilitiesGroup OBJECT-GROUP OBJECTS { fcFxPortCapFcphVersionHigh, fcFxPortCapFcphVersionLow, fcFxPortCapBbCreditMax, fcFxPortCapBbCreditMin, fcFxPortCapRxDataFieldSizeMax, fcFxPortCapRxDataFieldSizeMin, fcFxPortCapCos, fcFxPortCapIntermix, fcFxPortCapStackedConnMode, fcFxPortCapClass2SeqDeliv, fcFxPortCapClass3SeqDeliv, fcFxPortCapHoldTimeMax, fcFxPortCapHoldTimeMin } STATUS current DESCRIPTION "A collection of objects providing the inherent capability of each FxPort within the Fabric Element." ::= { fcFeMIBGroups 7 } END