Peler

: / usr / share / snmp / mibs / ietf /
Filename : DS0BUNDLE-MIB
back
DS0BUNDLE-MIB DEFINITIONS ::= BEGIN

IMPORTS
     MODULE-IDENTITY, OBJECT-TYPE,
     transmission                      FROM SNMPv2-SMI
     MODULE-COMPLIANCE, OBJECT-GROUP   FROM SNMPv2-CONF
     DisplayString, RowStatus,
     TestAndIncr                       FROM SNMPv2-TC
     ifIndex, InterfaceIndex           FROM IF-MIB;

--  This is the MIB module for the DS0Bundle Interface
--  objects.

ds0Bundle MODULE-IDENTITY
    LAST-UPDATED "9807161630Z"
    ORGANIZATION "IETF Trunk MIB Working Group"
    CONTACT-INFO
      "        David Fowler

       Postal: Newbridge Networks Corporation
               600 March Road
               Kanata, Ontario, Canada K2K 2E6

               Tel: +1 613 591 3600
               Fax: +1 613 599 3619

       E-mail: davef@newbridge.com"
    DESCRIPTION
         "The MIB module to describe
          DS0 Bundle interfaces objects."
    REVISION "9805242010Z"
    DESCRIPTION
         "Initial version of the DS0BUNDLE-MIB."
    ::= { transmission 82 }

--
-- The DS0 Bundle Config Group
--
-- Implementation of this group is mandatory for all
-- systems that use a DS0Bundle Interface.
--
-- The DS0 Bundle Config Group consists of one table:
--    DS0 Bundle Table

--  The DS0 Bundle Table

dsx0BundleNextIndex OBJECT-TYPE
    SYNTAX  TestAndIncr
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
            "This object is used to assist the manager in
            selecting a value for dsx0BundleIndex.  Because
            this object is of syntax TestAndIncr (see the
            SNMPv2-TC document, RFC 1903) it can also be used
            to avoid race conditions with multiple managers
            trying to create rows in the table.

            If the result of the SET for dsx0BundleNextIndex
            is not success, this means the value has been
            changed from index (i.e. another manager used the
            value), so a new value is required.

            The algorithm is:
            done = false
            while done == false
                index = GET (dsx0BundleNextIndex.0)
                SET (dsx0BundleNextIndex.0=index)
                if (set failed)
                  done = false
                else
                  SET(dsx0BundleRowStatus.index=createAndGo)
                  if (set failed)
                    done = false
                  else
                    done = true
                    other error handling"
    ::= { ds0Bundle 2 }

dsx0BundleTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF Dsx0BundleEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
            "There is an row in this table for each ds0Bundle
            in the system.  This table can be used to
            (indirectly) create rows in the ifTable with
            ifType = 'ds0Bundle(82)'."
    ::= { ds0Bundle 3 }

dsx0BundleEntry OBJECT-TYPE
    SYNTAX  Dsx0BundleEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
            "There is a row in entry in this table for each
            ds0Bundle interface."
    INDEX   { dsx0BundleIndex }
    ::= { dsx0BundleTable 1 }

Dsx0BundleEntry ::=
    SEQUENCE {
        dsx0BundleIndex              INTEGER,
        dsx0BundleIfIndex            InterfaceIndex,
        dsx0BundleCircuitIdentifier  DisplayString,
        dsx0BundleRowStatus          RowStatus
}

dsx0BundleIndex OBJECT-TYPE
    SYNTAX  INTEGER (0..2147483647)
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
            "A unique identifier for a ds0Bundle.  This is not
            the same value as ifIndex.  This table is not
            indexed by ifIndex because the manager has to
            choose the index in a createable row and the agent
            must be allowed to select ifIndex values."
    ::= { dsx0BundleEntry 1 }

dsx0BundleIfIndex OBJECT-TYPE
    SYNTAX  InterfaceIndex
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The ifIndex value the agent selected for the
            (new) ds0Bundle interface."
    ::= { dsx0BundleEntry 2 }

dsx0BundleCircuitIdentifier OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..255))
     MAX-ACCESS  read-create
     STATUS  current
     DESCRIPTION
            "This variable contains the transmission vendor's
            circuit identifier, for the purpose of
            facilitating troubleshooting."
     ::= { dsx0BundleEntry 3 }

dsx0BundleRowStatus OBJECT-TYPE
    SYNTAX  RowStatus
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
            "This object is used to create and delete rows in
            this table."
    ::= { dsx0BundleEntry 4 }

-- The DS0 Bonding Group

-- Implementation of this group is optional for all
-- systems that use a DS0Bundle Interface.

-- The DS0 Bonding Group consists of one table:
--    DS0 Bonding Table

-- The DS0 Bonding Table

dsx0BondingTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF Dsx0BondingEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
            "The DS0 Bonding table."
    ::= { ds0Bundle 1 }

dsx0BondingEntry OBJECT-TYPE
    SYNTAX  Dsx0BondingEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
            "An entry in the DS0 Bonding table.  There is a
            row in this table for each DS0Bundle interface."
    INDEX   { ifIndex }
    ::= { dsx0BondingTable 1 }

Dsx0BondingEntry ::=
    SEQUENCE {
        dsx0BondMode            INTEGER,
        dsx0BondStatus          INTEGER,
        dsx0BondRowStatus       RowStatus
}

dsx0BondMode OBJECT-TYPE
    SYNTAX  INTEGER {
                none(1),
                other(2),
                mode0(3),
                mode1(4),
                mode2(5),
                mode3(6)
    }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
            "This object indicates which BONDing mode is used,
            if any, for a ds0Bundle.  Mode0 provides parameter
            and number exchange with no synchronization.  Mode
            1 provides parameter and number exchange.  Mode 1
            also provides synchronization during
            initialization but does not include inband
            monitoring.  Mode 2 provides all of the above plus
            inband monitoring.  Mode 2 also steals 1/64th of
            the bandwidth of each channel (thus not supporting
            n x 56/64 kbit/s data channels for most values of
            n). Mode 3 provides all of the above, but also
            provides n x 56/64 kbit/s data channels.  Most
            common implementations of Mode 3 add an extra
            channel to support the inband monitoring overhead.
            ModeNone should be used when the interface is not
            performing bandwidth-on-demand."
    ::= { dsx0BondingEntry 1 }

dsx0BondStatus OBJECT-TYPE
    SYNTAX  INTEGER {
                idle(1),
                callSetup(2),
                dataTransfer(3)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "This object indicates the current status of the
            bonding call using this ds0Bundle. idle(1) should
            be used when the bonding mode is set to none(1)."
    ::= { dsx0BondingEntry 2 }

dsx0BondRowStatus OBJECT-TYPE
    SYNTAX  RowStatus
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
            "This object is used to create new rows in this
            table, modify existing rows, and to delete
            existing rows."
    ::= { dsx0BondingEntry 3 }

-- conformance information

ds0BundleConformance OBJECT IDENTIFIER ::= { ds0Bundle 4 }

ds0BundleGroups      OBJECT IDENTIFIER
    ::= { ds0BundleConformance 1 }

ds0BundleCompliances OBJECT IDENTIFIER
    ::= { ds0BundleConformance 2 }

-- compliance statements

ds0BundleCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for DS0Bundle
            interfaces."
    MODULE  -- this module
        MANDATORY-GROUPS {ds0BundleConfigGroup }

        GROUP       ds0BondingGroup
        DESCRIPTION
            "Implementation of this group is optional for all
            systems that attach to a DS0Bundle Interface."

        OBJECT      dsx0BundleRowStatus
        SYNTAX      INTEGER {
                        active(1),
                        createAndGo(4),
                        destroy(6)
                    }
        MIN-ACCESS  read-only
        DESCRIPTION
            "The agent is not required to support a SET
            operation to this object, and only three of the
            six enumerated values for the RowStatus textual
            convention need be supported.  Only supporting
            createAndGo for a creation process prevents the
            manager from creating an inactive row in the
            ds0BundleTable.  Inactive rows in the
            ds0BundleTable do not make sense."

        OBJECT      dsx0BundleCircuitIdentifier
        MIN-ACCESS  read-only
        DESCRIPTION
            "The agent is not required to support a SET

            operation to this object."
                ::= { ds0BundleCompliances 1 }

            -- units of conformance

            ds0BondingGroup  OBJECT-GROUP
                OBJECTS { dsx0BondMode,
                          dsx0BondStatus,
                          dsx0BondRowStatus }
                STATUS  current
                DESCRIPTION
                        "A collection of objects providing
                        configuration information applicable
                        to all DS0 interfaces."
    ::= { ds0BundleGroups 1 }
ds0BundleConfigGroup  OBJECT-GROUP
    OBJECTS { dsx0BundleNextIndex,
              dsx0BundleIfIndex,
              dsx0BundleCircuitIdentifier,
              dsx0BundleRowStatus }
    STATUS  current
    DESCRIPTION
            "A collection of objects providing the ability to
            create a new ds0Bundle in the ifTable as well as
            configuration information about the ds0Bundle."
    ::= { ds0BundleGroups 2 }
END