Peler

: / usr / share / snmp / mibs / ietf /
Filename : APPLICATION-MIB
back
APPLICATION-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
        Counter64, Counter32, Gauge32,
        mib-2, Unsigned32, zeroDotZero   FROM SNMPv2-SMI

    DateAndTime, TEXTUAL-CONVENTION,
        TestAndIncr, TDomain,
        TimeStamp, TruthValue            FROM SNMPv2-TC

    SnmpAdminString                      FROM SNMP-FRAMEWORK-MIB

    MODULE-COMPLIANCE, OBJECT-GROUP
                                         FROM SNMPv2-CONF

    LongUtf8String, sysApplElmtRunIndex  FROM SYSAPPL-MIB;

applicationMib MODULE-IDENTITY
    LAST-UPDATED "9811171815Z"
    ORGANIZATION "Application MIB Working Group"
    CONTACT-INFO
       "http://www.ietf.org/html.charters/applmib-charter.html

        Randy Presuhn
        BMC Software, Inc.
        965 Stewart Drive
        Sunnyvale, CA 94086
        USA

        Telephone: +1 408 616-3100
        Facsimile: +1 408 616-3101
        EMail: randy_presuhn@bmc.com
       "
    DESCRIPTION
       "This MIB defines objects representing generic aspects of
        applications that are of interest to management but typically
        require instrumentation within managed application elements.
       "
    ::= { mib-2 62 }

--
--      Registration hierarchy for this MIB
--
applicationMibObjects OBJECT IDENTIFIER ::=
                         { applicationMib 1 }

applicationMibConformance OBJECT IDENTIFIER ::=
                         { applicationMib 2 }

--
--      Groups defined in this MIB
--
applServiceGroup OBJECT IDENTIFIER ::=
                         { applicationMibObjects 1 }

applChannelGroup OBJECT IDENTIFIER ::=
                         { applicationMibObjects 2 }

applPastChannelGroup OBJECT IDENTIFIER ::=
                         { applicationMibObjects 3 }

applElmtRunControlGroup OBJECT IDENTIFIER ::=
                         { applicationMibObjects 4 }

Unsigned64TC ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "A non-negative 64-bit bit integer, without counter
         semantics."
    SYNTAX Counter64

ApplTAddress ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
          "Denotes a transport service address.

          For snmpUDPDomain, an ApplTAddress is 6 octets long,
          the initial 4 octets containing the IP-address in
          network-byte order and the last 2 containing the UDP
          port in network-byte order.  Consult 'Transport Mappings
          for Version 2 of the Simple Network Management Protocol
          (SNMPv2)' for further information on snmpUDPDomain."
    SYNTAX       OCTET STRING (SIZE (0..255))

-- ****************************************************************
--
--      applServiceGroup -
--
--      The service-level tables permit the identification of one
--      or more instances of named services on a system, and the
--      association of running application elements to services.
--
-- ****************************************************************

-- ****************************************************************
--
--      The service name to service instance table
--
-- ****************************************************************

applSrvNameToSrvInstTable OBJECT-TYPE
        SYNTAX            SEQUENCE OF ApplSrvNameToSrvInstEntry
        MAX-ACCESS        not-accessible
        STATUS            current
        DESCRIPTION
           "The service name to service instance table uses
            service name as its primary key, and service instance
            identifier as its secondary key.  It facilitates the
            identification and lookup of the instances of a given
            service in a system."
        ::= { applServiceGroup 1 }

applSrvNameToSrvInstEntry OBJECT-TYPE
        SYNTAX            ApplSrvNameToSrvInstEntry
        MAX-ACCESS        not-accessible
        STATUS            current
        DESCRIPTION
           "An applSrvNameToSrvInstEntry identifies an instance of
            a given service.  The allocation and reservation
            of unique values for applSrvIndex is an administrative
            issue.

            An applSrvNameToSrvInstEntry exists for the lifetime of
            that instance of that service; the index values may not
            change during that lifetime.  "
        INDEX { applSrvName, applSrvIndex }
        ::= { applSrvNameToSrvInstTable 1 }

ApplSrvNameToSrvInstEntry ::= SEQUENCE
        {
                applSrvInstQual SnmpAdminString
        }

applSrvInstQual         OBJECT-TYPE
        SYNTAX          SnmpAdminString
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "The value of applSrcInstQual provides additional
            information about this particular instance of this
            service.

            Although not used for indexing purposes, the value of
            this attribute should be sufficiently unique to be
            helpful to an administrator in distinguishing among
            service instances.  "
        ::= { applSrvNameToSrvInstEntry 1 }

-- ****************************************************************
--
--      Service instance to Service Name table
--
-- ****************************************************************

applSrvInstToSrvNameTable OBJECT-TYPE
        SYNTAX            SEQUENCE OF ApplSrvInstToSrvNameEntry
        MAX-ACCESS        not-accessible
        STATUS            current
        DESCRIPTION
           "The service instance to service name table uses
            service instance identifier as its primary key, and
            service name as its secondary key.  Given a service
            instance identifier, it facilitates the lookup of the
            name of the service being provided."
        ::= { applServiceGroup 2 }

applSrvInstToSrvNameEntry OBJECT-TYPE
        SYNTAX            ApplSrvInstToSrvNameEntry
        MAX-ACCESS        not-accessible
        STATUS            current
        DESCRIPTION
           "An applSrvInstToSrvNameEntry maps a service instance
            identifier back to a service name."
        INDEX { applSrvIndex, applSrvName }
        ::= { applSrvInstToSrvNameTable 1 }

ApplSrvInstToSrvNameEntry ::= SEQUENCE
        {
                applSrvName     SnmpAdminString
        }

applSrvName        OBJECT-TYPE
        SYNTAX     SnmpAdminString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
           "The human-readable name of a service.  Where
            appropriate, as in the case where a service can be
            identified in terms of a single protocol, the strings
            should be established names such as those assigned by
            IANA and found in STD 2 [13], or defined by some other
            authority.  In some cases private conventions apply
            and the string should in these cases be consistent
            with these non-standard conventions.   An applicability
            statement may specify the service name(s) to be used.
           "
        ::= { applSrvInstToSrvNameEntry 1 }

-- ****************************************************************
--
--      The service instance to running application element table
--
-- ****************************************************************

applSrvInstToRunApplElmtTable OBJECT-TYPE
        SYNTAX            SEQUENCE OF ApplSrvInstToRunApplElmtEntry
        MAX-ACCESS            not-accessible
        STATUS                current
        DESCRIPTION
           "The service instance to running application element
            table uses the service instance identifier as its primary
            key, and the running application element index as its
            secondary key.  This facilitates the identification

            of the set of running application elements providing a
            given instance of a service."
        ::= { applServiceGroup 3 }

applSrvInstToRunApplElmtEntry OBJECT-TYPE
        SYNTAX                ApplSrvInstToRunApplElmtEntry
        MAX-ACCESS            not-accessible
        STATUS                current
        DESCRIPTION
           "An applSrvInstToRunApplElmtEntry identifies a running
            application element providing an instance of a service.
            Note that there may be multiple running application
            elements involved in the provision of an instance of
            a service."
        INDEX { applSrvIndex, sysApplElmtRunIndex }
        ::= { applSrvInstToRunApplElmtTable 1 }

ApplSrvInstToRunApplElmtEntry ::= SEQUENCE
        {
                applSrvIndex       Unsigned32
        }

applSrvIndex        OBJECT-TYPE
        SYNTAX      Unsigned32 (1..'ffffffff'h)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "An applSrvIndex is the system-unique identifier of
             an instance of a service.  The value is unique not only
             across all instances of a given service, but also across
             all services in a system.

             Re-use of values for this index should be avoided.
             No two service instances in a given system shall
             concurrently have the same value for this index.

             The value zero is excluded from the set of permitted
             values for this index.  This allows other tables to
             potentially represent things which cannot be associated
             with a specific service instance.
            "
        ::= { applSrvInstToRunApplElmtEntry 1 }

-- ****************************************************************
--
--      The running application element to service instance table
--
-- ****************************************************************

applRunApplElmtToSrvInstTable OBJECT-TYPE
        SYNTAX           SEQUENCE OF ApplRunApplElmtToSrvInstEntry
        MAX-ACCESS            not-accessible
        STATUS                current
        DESCRIPTION
           "The running application element to service instance
            table uses the running application element index as
            its primary key and the service instance identifier as
            its secondary key.  It identifies the set of services
            provided by a given running application element."
        ::= { applServiceGroup 4 }

applRunApplElmtToSrvInstEntry OBJECT-TYPE
        SYNTAX                ApplRunApplElmtToSrvInstEntry
        MAX-ACCESS            not-accessible
        STATUS                current
        DESCRIPTION
           "An applRunApplElmtToSrvInstEntry serves to identify an
            instance of a service being provided by a given running
            application element.  Note that a particular running
            application element may provide multiple services."
        INDEX { sysApplElmtRunIndex, applSrvInstance }
        ::= { applRunApplElmtToSrvInstTable 1 }

ApplRunApplElmtToSrvInstEntry ::= SEQUENCE
        {
                applSrvInstance         Unsigned32
        }

applSrvInstance    OBJECT-TYPE
        SYNTAX     Unsigned32 (1..'ffffffff'h)
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
           "An applSrvInstance is the system-unique identifier of an
            instance of a service.  The value is unique not only
            across all instances of a given service, but also across
            all services.

            Re-use of values for this index should be avoided.
            No two service instances in a given system shall
            concurrently have the same value for this index.

            The value zero is excluded from the set of permitted
            values for this index.  This allows other tables to
            potentially represent things which cannot be associated
            with a specific service instance.

            This attribute is semantically identical to
            applSrvIndex."
        ::= { applRunApplElmtToSrvInstEntry  1 }

-- ****************************************************************
--
--      applChannelGroup - group with tables for I/O
--
--      In this group, the common abstraction is the Channel.
--      Channels are realized as files or connections.
--      The information flowing on a channel can always be
--      measured in terms of a byte stream.  Furthermore, for many
--      channels, this information may also be measured in terms
--      of transactions.
--
--      For all of these tables, the first two indexes determines
--      whether what is being measured is for a single running
--      application element or for an instance of a service.
--
--      The second index identifies the running application element
--      or service instance.
--
--      The third index is the channel id, which uniquely identifies
--      a channel within the context of a running application element
--      or service instance.
--
--      Any remaining indexes are table-specific.
--
-- ****************************************************************

-- ****************************************************************
--
--      applOpenChannelTable - Table of Open Channels
--
-- ****************************************************************

applOpenChannelTable OBJECT-TYPE
        SYNTAX       SEQUENCE OF ApplOpenChannelEntry
        MAX-ACCESS   not-accessible
        STATUS       current
        DESCRIPTION
           "The applOpenChannelTable reports information on open
            channels for running application elements
            and for service instances.  This table is
            indexed by applElmtOrSvc, applElmtOrSvcId, and
            applOpenChannelIndex. This effectively groups all
            entries for a given running application element
            or service instance together.  ApplChannelIndex uniquely
            identifies an open channel (and, consequently, a file
            or connection) within the context of a particular
            running application element or service instance.

            Some of the information in this table is available
            through both sixty-four and thirty-two bit counters.
            The sixty-four bit counters are not accessible in
            protocols that do not support this data type."
        ::= { applChannelGroup 1 }

applOpenChannelEntry OBJECT-TYPE
        SYNTAX       ApplOpenChannelEntry
        MAX-ACCESS   not-accessible
        STATUS       current
        DESCRIPTION
           "An applOpenChannelEntry indicates that a channel has been
            opened by this running application element or service
            instance and is still open.  Note that if a file has been
            opened multiple times, even by the same process, it will
            have multiple channel entries."
        INDEX           { applElmtOrSvc, applElmtOrSvcId,
                          applOpenChannelIndex }
        ::= { applOpenChannelTable 1 }

ApplOpenChannelEntry  ::= SEQUENCE
        {
                applElmtOrSvc                      INTEGER,
                applElmtOrSvcId                    Unsigned32,
                applOpenChannelIndex               Unsigned32,
                applOpenChannelOpenTime            TimeStamp,
                applOpenChannelReadRequests        Counter64,
                applOpenChannelReadRequestsLow     Counter32,
                applOpenChannelReadFailures        Counter32,
                applOpenChannelBytesRead           Counter64,
                applOpenChannelBytesReadLow        Counter32,
                applOpenChannelLastReadTime        DateAndTime,
                applOpenChannelWriteRequests       Counter64,
                applOpenChannelWriteRequestsLow    Counter32,
                applOpenChannelWriteFailures       Counter32,
                applOpenChannelBytesWritten        Counter64,
                applOpenChannelBytesWrittenLow     Counter32,
                applOpenChannelLastWriteTime       DateAndTime
        }

applElmtOrSvc      OBJECT-TYPE
        SYNTAX     INTEGER { service(1),
                             element(2) }
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
           "The applElmtOrSvc attribute serves as an index for tables
            that can hold information both for individual running
            application elements as well as for service instances.

            If the value is service(1), the row contains information
            gathered at the level of a service.

            If the value is element(2), the row contains information
            for an individual running application element."
        ::= { applOpenChannelEntry 1 }

applElmtOrSvcId    OBJECT-TYPE
        SYNTAX     Unsigned32 (1..'ffffffff'h)
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
           "The applElmtOrSvcId attribute is used as an index in
            conjunction with the applElmtOrSvc attribute.

            When the value of applElmtOrSvc is service(1), this
            attribute's value corresponds to that of applSrvIndex,
            when the value of applElmtOrSvc is element(2), this
            attribute's value corresponds to sysApplElmtRunIndex."
        ::= { applOpenChannelEntry 2 }

applOpenChannelIndex OBJECT-TYPE
        SYNTAX       Unsigned32
        MAX-ACCESS   not-accessible
        STATUS       current
        DESCRIPTION
           "This attribute serves to uniquely identify this open
            connection in the context of the running application
            element or service instance.  Where suitable, the
            application's native descriptor number should be used."
        ::= { applOpenChannelEntry 3 }

applOpenChannelOpenTime OBJECT-TYPE
        SYNTAX          TimeStamp
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "This attribute records the value of sysUpTime.0
            when this channel was opened and this entry was added to
            this table.  This attribute serves as a discontinuity
            indicator for the counter attributes in this entry
            and for any corresponding entries in the
            applOpenConnectionTable, applOpenFileTable, and the
            applTransactionStreamTable."
        ::= { applOpenChannelEntry 4 }

applOpenChannelReadRequests OBJECT-TYPE
        SYNTAX              Counter64
        UNITS               "read requests"
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
           "This attribute reports the number of read requests
            for this channel.  All read requests for this channel
            by this entity, regardless of completion status, are
            included in this count.

            Read requests are counted in terms of system calls,
            rather than API calls.

            Discontinuities in this counter can be detected by
            monitoring the applOpenChannelOpenTime value for this
            entry."
        ::= { applOpenChannelEntry 5 }

applOpenChannelReadRequestsLow OBJECT-TYPE
        SYNTAX                 Counter32
        UNITS                  "read requests"
        MAX-ACCESS             read-only
        STATUS                 current
        DESCRIPTION
           "This attribute reports the low thirty-two bits of
            applOpenChannelReadRequests.

            Discontinuities in this counter can be detected by
            monitoring the applOpenChannelOpenTime value for this
            entry."
        ::= { applOpenChannelEntry 6 }

applOpenChannelReadFailures OBJECT-TYPE
        SYNTAX              Counter32
        UNITS               "failed read requests"
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
           "This attribute reports the number of failed read
            requests.

            Discontinuities in this counter can be detected by
            monitoring the applOpenChannelOpenTime value for this
            entry."
        ::= { applOpenChannelEntry 7 }

applOpenChannelBytesRead OBJECT-TYPE
        SYNTAX           Counter64
        UNITS            "bytes"
        MAX-ACCESS       read-only
        STATUS           current
        DESCRIPTION
           "This attribute reports the number of bytes read from
            this channel.  Only bytes successfully read are included
            in this count.

            Discontinuities in this counter can be detected by
            monitoring the applOpenChannelOpenTime value for this
            entry."
        ::= { applOpenChannelEntry 8 }

applOpenChannelBytesReadLow OBJECT-TYPE
        SYNTAX              Counter32
        UNITS               "bytes"
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
           "This attribute corresponds to the low thirty-two bits
            of applOpenChannelBytesRead.

            Discontinuities in this counter can be detected by
            monitoring the applOpenChannelOpenTime value for this
            entry."
        ::= { applOpenChannelEntry 9 }

applOpenChannelLastReadTime OBJECT-TYPE
        SYNTAX              DateAndTime
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
           "This attribute reports the time of the most recent read
            request made by this entity, regardless of completion
            status, for this open channel.

            If no read requests have been made the value of this
            attribute shall be '0000000000000000'H "
        DEFVAL { '0000000000000000'H }
        ::= { applOpenChannelEntry 10 }

applOpenChannelWriteRequests OBJECT-TYPE
        SYNTAX               Counter64
        UNITS                "write requests"
        MAX-ACCESS           read-only
        STATUS               current
        DESCRIPTION
           "This attribute reports the number of write requests for
            this channel made by this entity.  All write requests
            for this channel, regardless of completion status, are
            included in this count.

            Write requests are counted in terms of system calls,
            rather than API calls.

            Discontinuities in this counter can be detected by
            monitoring the applOpenChannelOpenTime value for this
            entry."
        ::= { applOpenChannelEntry 11 }

applOpenChannelWriteRequestsLow OBJECT-TYPE
        SYNTAX                  Counter32
        UNITS                   "write requests"
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
           "This attribute corresponds to the low thirty-two bits
            of applOpenChannelWriteRequests.

            Discontinuities in this counter can be detected
            by monitoring the applOpenChannelOpenTime value for
            this entry."
        ::= { applOpenChannelEntry 12 }

applOpenChannelWriteFailures OBJECT-TYPE
        SYNTAX               Counter32
        UNITS                "failed write requests"
        MAX-ACCESS           read-only
        STATUS               current
        DESCRIPTION
           "This attribute reports the number of failed write
            requests.

            Discontinuities in this counter can be detected
            by monitoring the applOpenChannelOpenTime value for
            this entry."
        ::= { applOpenChannelEntry 13 }

applOpenChannelBytesWritten OBJECT-TYPE
        SYNTAX              Counter64
        UNITS               "bytes"
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
           "This attribute reports the number of bytes written to
            this channel.  Only bytes successfully written (without
            errors reported by the system to the API in use by the
            application) are included in this count.

            Discontinuities in this counter can be detected by
            monitoring the applOpenChannelOpenTime value for this
            entry."
        ::= { applOpenChannelEntry 14 }

applOpenChannelBytesWrittenLow OBJECT-TYPE
        SYNTAX                 Counter32
        UNITS                  "bytes"
        MAX-ACCESS             read-only
        STATUS                 current
        DESCRIPTION
           "This attribute corresponds to the low thirty-two bits
            of applOpenChannelBytesWritten.

            Discontinuities in this counter can be detected by
            monitoring the applOpenChannelOpenTime value for this
            entry."
        ::= { applOpenChannelEntry 15 }

applOpenChannelLastWriteTime OBJECT-TYPE
        SYNTAX               DateAndTime
        MAX-ACCESS           read-only
        STATUS               current
        DESCRIPTION
           "This attribute reports the time of the most recent write
            request made by this running application element or
            service instance, regardless of completion status, for
            this open channel.

            If no write requests have been made, the value
            of this attribute shall be '0000000000000000'H "
        DEFVAL { '0000000000000000'H }
        ::= { applOpenChannelEntry 16 }

-- ****************************************************************
--
--      applOpenFileTable - Table of Open Files
--
-- ****************************************************************

applOpenFileTable  OBJECT-TYPE
        SYNTAX     SEQUENCE OF ApplOpenFileEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
           "The applOpenFileTable reports information on open files
            for service instances or application elements.  This
            table is indexed by applElmtOrSvc and applElmtOrSvcId,
            effectively grouping all entries for a given running
            service instance or application element together, and
            by applOpenChannelIndex, uniquely identifying an open
            channel (and, consequently, a file) within the context
            of a particular service instance or application element.

            Elements in this table correspond to elements in the
            applOpenChannelTable that represent files.  For rows in
            the applOpenChannelTable that do not represent files,
            corresponding rows in this table will not exist."
        ::= { applChannelGroup 2 }

applOpenFileEntry   OBJECT-TYPE
        SYNTAX      ApplOpenFileEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
           "An applOpenFileEntry indicates that a file has been
            opened by this running application element and is
            still open.  Note that if a file has been opened
            multiple times, even by the same process, it will have
            multiple entries."
        INDEX       { applElmtOrSvc, applElmtOrSvcId,
                      applOpenChannelIndex }
        ::= { applOpenFileTable 1 }

ApplOpenFileEntry  ::= SEQUENCE
        {
                applOpenFileName                LongUtf8String,
                applOpenFileSizeHigh            Unsigned32,
                applOpenFileSizeLow             Unsigned32,
                applOpenFileMode                INTEGER
         }

applOpenFileName   OBJECT-TYPE
        SYNTAX     LongUtf8String
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
          "This attribute reports the name of this open file.
           Wherever practical, a fully qualified path name should
           be reported.

           The values 'stdin', 'stdout', and 'stderr' are reserved
           in accordance with common usage when the fully qualified
           path name cannot be determined."
        ::= { applOpenFileEntry 1 }

applOpenFileSizeHigh OBJECT-TYPE
        SYNTAX       Unsigned32
        UNITS        "2^32 byte blocks"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
          "This file's current size in 2^32 byte blocks.

           For example, for a file with a total size of 4,294,967,296
           bytes, this attribute would have a value of 1; for a file
           with a total size of 4,294,967,295 bytes this attribute's
           value would be 0."
        ::= { applOpenFileEntry 2 }

applOpenFileSizeLow OBJECT-TYPE
        SYNTAX      Unsigned32
        UNITS       "bytes"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           "This file's current size modulo 2^32 bytes.

            For example, for a file with a total size of
            4,294,967,296 bytes this attribute would have a value
            of 0; for a file with a total size of 4,294,967,295
            bytes this attribute's value would be 4,294,967,295."
        ::= { applOpenFileEntry 3 }

applOpenFileMode   OBJECT-TYPE
        SYNTAX     INTEGER { read(1),
                             write(2),
                             readWrite(3) }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
           "This attribute reports the current mode of this file from
            the perspective of this running application element.

            These values have the following meanings:

                read(1) - file opened for reading only
                write(2) - file opened for writing only
                readWrite(3) - file opened for read and write.

            These values correspond to the POSIX/ANSI C library
            function fopen() 'type' parameter, using the following
            mappings:

                r -> read(1)
                w -> write(2)
                a -> write(2)
                + -> readWrite(3)
          "
        ::= { applOpenFileEntry 4 }

-- ****************************************************************
--
--      applOpenConnectionTable - Open Connection Table
--
-- ****************************************************************

applOpenConnectionTable OBJECT-TYPE
        SYNTAX          SEQUENCE OF ApplOpenConnectionEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
           "The applOpenConnectionTable provides information about
            open and listening connections from the perspective
            of a running application element or service instance.
            Entries in this table are indexed by applElmtOrSvc,
            applElmtOrSvcID, and by applOpenChannelIndex, which
            serves to uniquely identify each connection in the
            context of a service instance or running application

            element.

            For each row in this table, a corresponding row will
            exist in the applOpenChannel table.  For rows in the
            applOpenChannelTable which do not represent open or
            listening connections, no corresponding rows will exist
            in this table."
        ::= { applChannelGroup 3 }

applOpenConnectionEntry OBJECT-TYPE
        SYNTAX          ApplOpenConnectionEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
           "An applOpenConnectionEntry indicates that a running
            application element or service instance has an open
            connection.  The entry has information describing that
            connection.

            In the case of a TCP transport, the element
            applOpenConnectionNearEndAddr and that row's
            applOpenConnectionFarEndAddr would correspond
            to a tcpConnEntry.  For a UDP transport, a
            similar relationship exists with respect to
            a udpEntry."
        INDEX           { applElmtOrSvc, applElmtOrSvcId,
                          applOpenChannelIndex }
        ::= { applOpenConnectionTable 1 }

ApplOpenConnectionEntry  ::= SEQUENCE
        {
                applOpenConnectionTransport     TDomain,
                applOpenConnectionNearEndAddr   ApplTAddress,
                applOpenConnectionNearEndpoint  SnmpAdminString,
                applOpenConnectionFarEndAddr    ApplTAddress,
                applOpenConnectionFarEndpoint   SnmpAdminString,
                applOpenConnectionApplication   SnmpAdminString
        }

applOpenConnectionTransport OBJECT-TYPE
        SYNTAX              TDomain
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
           "The applOpenConnectionTransport attribute identifies the
            transport protocol in use for this connection.  If it is
            not practical to determine the underlying transport, this
            attribute's value shall have a value of {0 0}."
        DEFVAL { zeroDotZero }
        ::= { applOpenConnectionEntry 1 }

applOpenConnectionNearEndAddr OBJECT-TYPE
        SYNTAX                ApplTAddress
        MAX-ACCESS            read-only
        STATUS                current
        DESCRIPTION
           "The applOpenConnectionNearEndAddr attribute reports the
            transport address and port information for the near end
            of this connection.

            If the value is not known, the value has a  length
            of zero."
        DEFVAL { "" }
        ::= { applOpenConnectionEntry 2 }

applOpenConnectionNearEndpoint OBJECT-TYPE
        SYNTAX                 SnmpAdminString
        MAX-ACCESS             read-only
        STATUS                 current
        DESCRIPTION
           "The applOpenConnectionNearEndpoint attribute reports the
            fully-qualified domain name and port information for the
            near end of this connection.

            The format of this attribute for TCP and UDP-based
            protocols is the fully-qualified domain name immediately
            followed by a colon which is immediately followed by
            the decimal representation of the port number.

            If the value is not known, the value has a  length
            of zero."
        DEFVAL { "" }
        ::= { applOpenConnectionEntry 3 }

applOpenConnectionFarEndAddr OBJECT-TYPE
        SYNTAX               ApplTAddress
        MAX-ACCESS           read-only
        STATUS               current
        DESCRIPTION
           "The applOpenConnectionFarEndAddr attribute reports the
            transport address and port information for the far end
            of this connection.

            If not known, as in the case of a connectionless
            transport, the value of this attribute shall be a
            zero-length string."
        DEFVAL { "" }
        ::= { applOpenConnectionEntry 4 }

applOpenConnectionFarEndpoint OBJECT-TYPE
        SYNTAX               SnmpAdminString
        MAX-ACCESS           read-only
        STATUS               current
        DESCRIPTION
           "The applOpenConnectionFarEndpoint attribute reports
            the fully-qualified domain name and port information
            for the far end of this connection.

            The format of this attribute for TCP and UDP-based
            protocols is the fully-qualified domain name immediately
            followed by a colon which is immediately followed by
            the decimal representation of the port number.

            If not known, as in the case of a connectionless
            transport, the value of this attribute shall be a
            zero-length string."
        DEFVAL { "" }
        ::= { applOpenConnectionEntry 5 }

applOpenConnectionApplication OBJECT-TYPE
        SYNTAX                SnmpAdminString
        MAX-ACCESS            read-only
        STATUS                current
        DESCRIPTION
           "The applOpenConnectionApplication attribute identifies
            the application layer protocol in use.  If not known,
            the value of this attribute shall be a zero-length
            string.

            When possible, protocol names should be those used in
            the 'ASSIGNED NUMBERS' [13].  For example, an SMTP mail
            server would use 'SMTP'."
        DEFVAL { "" }
        ::= { applOpenConnectionEntry 6 }

-- ****************************************************************
--
--      applTransactionStreamTable - common
--      information for transaction stream monitoring
--
-- ****************************************************************

applTransactionStreamTable OBJECT-TYPE
        SYNTAX             SEQUENCE OF ApplTransactionStreamEntry
        MAX-ACCESS         not-accessible
        STATUS             current
        DESCRIPTION
           "The applTransactionStreamTable contains common
            information for transaction statistic accumulation."
        ::= { applChannelGroup 4 }

applTransactionStreamEntry OBJECT-TYPE
        SYNTAX             ApplTransactionStreamEntry
        MAX-ACCESS         not-accessible
        STATUS             current
        DESCRIPTION
           "An applTransactionStreamEntry contains information for
            a single transaction stream.  A transaction stream
            can be a network connection, file, or other source
            of transactions."
        INDEX           { applElmtOrSvc, applElmtOrSvcId,
                          applOpenChannelIndex }
        ::= { applTransactionStreamTable 1 }

ApplTransactionStreamEntry ::= SEQUENCE {
        applTransactStreamDescr       SnmpAdminString,
        applTransactStreamUnitOfWork  SnmpAdminString,
        applTransactStreamInvokes     Counter64,
        applTransactStreamInvokesLow  Counter32,
        applTransactStreamInvCumTimes Counter32,
        applTransactStreamInvRspTimes Counter32,
        applTransactStreamPerforms    Counter64,
        applTransactStreamPerformsLow Counter32,
        applTransactStreamPrfCumTimes Counter32,
        applTransactStreamPrfRspTimes Counter32 }

applTransactStreamDescr OBJECT-TYPE
        SYNTAX          SnmpAdminString
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "The applTransactStreamDescr attribute provides a
            human-readable description of this transaction stream.

            If no descriptive information is available, this
            attribute's value shall be a zero-length string."
        DEFVAL { "" }
        ::= { applTransactionStreamEntry 1 }

applTransactStreamUnitOfWork OBJECT-TYPE
        SYNTAX               SnmpAdminString
        MAX-ACCESS           read-only
        STATUS               current
        DESCRIPTION
           "The applTransactStreamUnitOfWork attribute provides a
            human-readable definition of what the unit of work is
            for this transaction stream.

            If no descriptive information is available, this
            attribute's value shall be a zero-length string."
        DEFVAL { "" }
        ::= { applTransactionStreamEntry 2 }

applTransactStreamInvokes OBJECT-TYPE
        SYNTAX            Counter64
        UNITS             "transactions"
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
           "Cumulative count of requests / invocations issued.

            Discontinuities in this counter can be detected
            by monitoring the corresponding instance of
            applOpenChannelOpenTime."
        ::= { applTransactionStreamEntry 3 }

applTransactStreamInvokesLow OBJECT-TYPE
        SYNTAX               Counter32
        UNITS                "transactions"
        MAX-ACCESS           read-only
        STATUS               current
        DESCRIPTION
           "This counter corresponds to the low thirty-two
            bits of applTransactStreamInvokes.

            Discontinuities in this counter can be detected
            by monitoring the corresponding instance of
            applOpenChannelOpenTime."
        ::= { applTransactionStreamEntry 4 }

applTransactStreamInvCumTimes OBJECT-TYPE
        SYNTAX                Counter32
        UNITS                 "milliseconds"
        MAX-ACCESS            read-only
        STATUS                current
        DESCRIPTION
           "The applTransactStreamInvCumTimes attribute reports the
            cumulative sum of the lengths of the intervals measured
            between the transmission of requests and the receipt of
            (the first of) the corresponding response(s).

            Discontinuities in this counter can be detected
            by monitoring the corresponding instance of
            applOpenChannelOpenTime."
        ::= { applTransactionStreamEntry 5 }

applTransactStreamInvRspTimes OBJECT-TYPE
        SYNTAX                Counter32
        UNITS                 "milliseconds"
        MAX-ACCESS            read-only
        STATUS                current
        DESCRIPTION
           "The applTransactStreamInvRspTimes attribute reports the
            cumulative sum of the lengths of the intervals measured
            between the receipt of the first and last of multiple
            responses to a request.

            For transaction streams which do not permit multiple
            responses to a single request, this attribute will be
            constant.

            Discontinuities in this counter can be detected
            by monitoring the corresponding instance of
            applOpenChannelOpenTime."
        ::= { applTransactionStreamEntry 6 }

applTransactStreamPerforms OBJECT-TYPE
        SYNTAX             Counter64
        UNITS              "transactions"
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
           "Cumulative count of transactions performed.

            Discontinuities in this counter can be detected
            by monitoring the corresponding instance of
            applOpenChannelOpenTime."
        ::= { applTransactionStreamEntry 7 }

applTransactStreamPerformsLow OBJECT-TYPE
        SYNTAX                Counter32
        UNITS                 "transactions"
        MAX-ACCESS            read-only
        STATUS                current
        DESCRIPTION
           "This counter reports the low thirty-two bits of
            applTransactStreamPerforms.

            Discontinuities in this counter can be detected
            by monitoring the corresponding instance of
            applOpenChannelOpenTime."
        ::= { applTransactionStreamEntry 8 }

applTransactStreamPrfCumTimes OBJECT-TYPE
        SYNTAX                Counter32
        UNITS                 "milliseconds"
        MAX-ACCESS            read-only
        STATUS                current
        DESCRIPTION
           "The applTransactStreamPrfCumTimes attribute reports the
            cumulative sum of the interval lengths measured between
            receipt of requests and the transmission of the
            corresponding responses.

            Discontinuities in this counter can be detected
            by monitoring the corresponding instance of
            applOpenChannelOpenTime."
        ::= { applTransactionStreamEntry 9 }

applTransactStreamPrfRspTimes OBJECT-TYPE
        SYNTAX                Counter32
        UNITS                 "milliseconds"
        MAX-ACCESS            read-only
        STATUS                current
        DESCRIPTION
           "For each transaction performed, the elapsed time between
            when the first response is enqueued and when the last
            response is enqueued is added to this cumulative sum.

            For single-response protocols, the value of
            applTransactStreamPrfRspTimes will be constant.

            Discontinuities in this counter can be detected
            by monitoring the corresponding instance of
            applOpenChannelOpenTime."
        ::= { applTransactionStreamEntry 10 }

-- ****************************************************************
--
--      applTransactFlowTable
--
-- ****************************************************************

applTransactFlowTable OBJECT-TYPE
        SYNTAX        SEQUENCE OF ApplTransactFlowEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION
           "The applTransactFlowTable contains entries, organized by
            application instance or running application element,
            direction of flow, and type (request/response) for each
            open transaction stream.

            The simple model of a transaction used here looks like
            this:

                invoker  |   Request     | performer
                         | - - - - - - > |
                         |               |
                         |   Response    |
                         | < - - - - - - |
                         |               |

            Since in some protocols it is possible for an entity
            to take on both the invoker and performer roles,
            information here is accumulated for transmitted and
            received requests, as well as for transmitted and
            received responses.  Counts are maintained for both
            transactions and bytes transferred."
        ::= { applChannelGroup 5 }

applTransactFlowEntry OBJECT-TYPE
        SYNTAX        ApplTransactFlowEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION
           "An applTransactFlowEntry reports transaction throughput
            information for requests or response in a particular
            direction (transmit / receive) for a transaction stream.

            Entries in this table correspond to those in the
            applTransactionStreamTable with identical values for the
            applElmtOrSvc, applElmtOrSvcId, and applOpenChannelIndex.

            For all counter objects in one of these entries,
            the corresponding (same value for applElmtOrSvc,
            applElmtOrSvcId, and applOpenChannelIndex)
            applOpenChannelOpenTime object serves as a discontinuity
            indicator.  "
        INDEX           { applElmtOrSvc,
                          applElmtOrSvcId,
                          applOpenChannelIndex,
                          applTransactFlowDirection,
                          applTransactFlowReqRsp }
        ::= { applTransactFlowTable 1 }

ApplTransactFlowEntry ::= SEQUENCE {
                applTransactFlowDirection INTEGER,
                applTransactFlowReqRsp    INTEGER,
                applTransactFlowTrans     Counter64,
                applTransactFlowTransLow  Counter32,
                applTransactFlowBytes     Counter64,
                applTransactFlowBytesLow  Counter32,
                applTransactFlowTime      DateAndTime }

applTransactFlowDirection OBJECT-TYPE
        SYNTAX            INTEGER { transmit(1),
                                    receive(2) }
        MAX-ACCESS        not-accessible
        STATUS            current
        DESCRIPTION
            "The applTransactFlowDirection index serves to identify
             an entry as containing information pertaining to the
             transmit (1) or receive (2) flow of a transaction
             stream."
        ::= { applTransactFlowEntry 1 }

applTransactFlowReqRsp OBJECT-TYPE
        SYNTAX         INTEGER { request(1),
                                 response(2) }
        MAX-ACCESS     not-accessible
        STATUS         current
        DESCRIPTION
           "The value of the applTransactFlowReqRsp index indicates
            whether this entry contains information on requests
            (1), or responses (2)."
        ::= { applTransactFlowEntry 2 }

applTransactFlowTrans OBJECT-TYPE
        SYNTAX        Counter64
        UNITS         "transactions"
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION
            "The applTransactFlowTrans attribute reports the number
             of request/response transactions (as indicated by
             the applTransactFlowReqRsp index) received/generated
             (as indicated by the applTransactFlowDirection index)
             that this service instance or running application
             element has processed for this transaction stream.

             Discontinuities in this counter can be detected
             by monitoring the corresponding instance of
             applOpenChannelOpenTime."
        ::= { applTransactFlowEntry 3 }

applTransactFlowTransLow OBJECT-TYPE
        SYNTAX           Counter32
        UNITS            "transactions"
        MAX-ACCESS       read-only
        STATUS           current
        DESCRIPTION
            "This attribute corresponds to the low thirty-two
             bits of applTransactFlowTrans.

             Discontinuities in this counter can be detected
             by monitoring the corresponding instance of
             applOpenChannelOpenTime."
        ::= { applTransactFlowEntry 4 }

applTransactFlowBytes OBJECT-TYPE
        SYNTAX        Counter64
        UNITS         "bytes"
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION
           "The applTransactFlowBytes attribute reports the number
            of request/response (as indicated by the
            applTransactFlowReqRsp index) bytes received/generated
            (as indicated by the applTransactFlowDirection index)
            handled by this application element or service instance
            on this transaction stream.

            All application layer bytes are included in this count,
            including any application layer wrappers, headers, or
            other overhead.

            Discontinuities in this counter can be detected
            by monitoring the corresponding instance of
            applOpenChannelOpenTime."
        ::= { applTransactFlowEntry 5 }

applTransactFlowBytesLow OBJECT-TYPE
        SYNTAX           Counter32
        UNITS            "bytes"
        MAX-ACCESS       read-only
        STATUS           current
        DESCRIPTION
           "This attribute corresponds to the low thirty-two
            bits of applTransactFlowBytes.

            Discontinuities in this counter can be detected
            by monitoring the corresponding instance of
            applOpenChannelOpenTime."
        ::= { applTransactFlowEntry 6 }

applTransactFlowTime OBJECT-TYPE
        SYNTAX       DateAndTime
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The applTransactFlowTime attribute records the time of
            the processing (receipt or transmission as indicated
            by the applTransactFlowDirection index) by this
            running application element or service instance of
            the most recent request/response (as indicated by
            the applTransactFlowReqRsp index) on this transaction
            stream.

            If no requests/responses been received/transmitted by
            this entity over this transaction stream, the value
            of this attribute shall be '0000000000000000'H "
        DEFVAL { '0000000000000000'H }
        ::= { applTransactFlowEntry 7 }

-- ****************************************************************
--
--      applTransactKindTable - transaction statistics broken down
--      according to the kinds of transactions in each direction
--      for a transaction stream.
--
-- ****************************************************************

applTransactKindTable   OBJECT-TYPE
        SYNTAX SEQUENCE OF ApplTransactKindEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
           "The applTransactKindTable provides transaction statistics
            broken down by kinds of transaction.  The definition of
            the kinds of transactions is specific to the application
            protocol in use, and may be documented in the form of an
            applicability statement.  "
        ::= { applChannelGroup 6 }

applTransactKindEntry OBJECT-TYPE
        SYNTAX        ApplTransactKindEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION
           "An applTransactKindEntry reports information for a
            specific service instance or running application
            element's use of a specific transaction stream in
            a particular direction in requests or responses
            (as indicated by the applTransactFlowReqRsp index)
            broken down by transaction kind, as indicated by the
            applTransactKind index.

            Discontinuities in any of the counters in an entry can
            be detected by monitoring the corresponding instance of
            applOpenChannelOpenTime."
        INDEX           { applElmtOrSvc,
                          applElmtOrSvcId,
                          applOpenChannelIndex,
                          applTransactFlowDirection,
                          applTransactFlowReqRsp,
                          applTransactKind }
        ::= { applTransactKindTable 1 }

ApplTransactKindEntry ::= SEQUENCE
        {
                applTransactKind                SnmpAdminString,
                applTransactKindTrans           Counter64,
                applTransactKindTransLow        Counter32,
                applTransactKindBytes           Counter64,
                applTransactKindBytesLow        Counter32,
                applTransactKindTime            DateAndTime
        }

applTransactKind   OBJECT-TYPE
        SYNTAX     SnmpAdminString (SIZE (1 .. 32))
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
           "The applTransactKind index is the human-readable
            identifier for a particular transaction kind within
            the context of an application protocol.  The values
            to be used for a particular protocol may be identified
            in an applicability statement."
        ::= { applTransactKindEntry 1 }

applTransactKindTrans OBJECT-TYPE
        SYNTAX        Counter64
        UNITS         "transactions"
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION
           "The applTransactKindTrans attribute reports the number
            of request/response (as indicated by the
            applTransactFlowReqRsp index) transactions
            received/generated (as indicated by the
            applTransactFlowDirection index) handled by this
            application instance or application element on this
            transaction stream for this transaction kind.

            Discontinuities in this counter can be detected
            by monitoring the corresponding instance of
            applOpenChannelOpenTime."
        ::= { applTransactKindEntry 2 }

applTransactKindTransLow OBJECT-TYPE
        SYNTAX           Counter32
        UNITS            "transactions"
        MAX-ACCESS       read-only
        STATUS           current
        DESCRIPTION
           "The applTransactKindTransLow attribute reports
            the low thirty-two bits of applTransactKindTrans.

            Discontinuities in this counter can be detected
            by monitoring the corresponding instance of
            applOpenChannelOpenTime."
        ::= { applTransactKindEntry 3 }

applTransactKindBytes OBJECT-TYPE
        SYNTAX        Counter64
        UNITS         "bytes"
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION
           "The applTransactKindBytes attribute reports the number
            of request/response (as indicated by the

            applTransactFlowReqRsp index) bytes received/generated
            (as indicated by the applTransactFlowDirection index)
            handled by this application element on this transaction
            stream for this transaction kind.

            All application layer bytes are included in this count,
            including any application layer wrappers, headers, or
            other overhead.

            Discontinuities in this counter can be detected
            by monitoring the corresponding instance of
            applOpenChannelOpenTime."
        ::= { applTransactKindEntry 4 }

applTransactKindBytesLow OBJECT-TYPE
        SYNTAX           Counter32
        UNITS            "bytes"
        MAX-ACCESS       read-only
        STATUS           current
        DESCRIPTION
           "The applTransactKindBytesLow attribute corresponds
            to the low thirty-two bits of applTransactKindBytes.

            Discontinuities in this counter can be detected
            by monitoring the corresponding instance of
            applOpenChannelOpenTime."
        ::= { applTransactKindEntry 5 }

applTransactKindTime OBJECT-TYPE
        SYNTAX       DateAndTime
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The applTransactKindTime attribute records the time of
            the processing (receipt or transmission as indicated
            by the applTransactFlowDirection index) by this
            running application element or service instance of
            the most recent request/response (as indicated by
            the applTransactFlowReqRsp index) of this kind of
            transaction on this transaction stream.

            If no requests/responses of this kind been
            received/transmitted by this running application element
            or service instance over this transaction stream, the
            value of this attribute shall be '0000000000000000'H "
        DEFVAL { '0000000000000000'H }
        ::= { applTransactKindEntry 6 }

-- ****************************************************************
--
--      applPastChannelGroup - logged information on former channels.
--      These tables control the collection of channel history
--      information and represent the accumulated historical data.
--
-- ****************************************************************

applPastChannelControlTable OBJECT-TYPE
        SYNTAX           SEQUENCE OF ApplPastChannelControlEntry
        MAX-ACCESS       not-accessible
        STATUS           current
        DESCRIPTION
           "The applPastChannelControlTable controls the
            accumulation of history information about channels
            from the perspective of service instances and running
            application elements.  Entries in this table are indexed
            by applElmtOrSvc and applElmtOrSvcId, giving control
            of channel history accumulation at the level of each
            service instance and running application element."
        ::= { applPastChannelGroup 1 }

applPastChannelControlEntry OBJECT-TYPE
        SYNTAX           ApplPastChannelControlEntry
        MAX-ACCESS       not-accessible
        STATUS           current
        DESCRIPTION
           "An applPastChannelControlEntry provides the ability
            to control the retention of channel history information
            by service instances and running application elements."
        INDEX           { applElmtOrSvc, applElmtOrSvcId }
        ::= { applPastChannelControlTable 1 }

ApplPastChannelControlEntry  ::= SEQUENCE
        {
                applPastChannelControlCollect   INTEGER,
                applPastChannelControlMaxRows   Unsigned32,
                applPastChannelControlTimeLimit Unsigned32,
                applPastChannelControlRemItems  Counter32
        }

applPastChannelControlCollect OBJECT-TYPE
        SYNTAX             INTEGER { enabled (1),
                                     frozen (2),
                                     disabled (3) }
        MAX-ACCESS         read-write
        STATUS             current
        DESCRIPTION
           "When the value of applPastChannelControlCollect is
            'enabled', each time the corresponding running
            application element or service instance closes
            an open channel a new entry will be added to the
            applPastChannelTable.

            When the value of applPastChannelControlCollect
            is 'frozen', no new entries are added to the
            applPastChannelTable for this running application
            element or service instance, and old entries are not
            aged out.

            When the value of applPastChannelControlCollect
            is 'disabled', all entries are removed from
            applPastChannelTable for this running application or
            service instance, and no new entries are added."
        DEFVAL { enabled }
        ::= { applPastChannelControlEntry 1 }

applPastChannelControlMaxRows OBJECT-TYPE
        SYNTAX             Unsigned32
        UNITS              "channel history entries"
        MAX-ACCESS         read-write
        STATUS             current
        DESCRIPTION
           "The maximum number of entries allowed in the
            applPastChannelTable for this running application element
            or service instance.  Once the number of rows for this
            running application element or service instance in the
            applPastChannelTable reaches this value, when new
            entries are to be added the management subsystem will
            make room for them by removing the oldest entries.
            Entries will be removed on the basis of oldest
            applPastChannelCloseTime value first."
        DEFVAL          { 500 }
        ::= { applPastChannelControlEntry 2 }

applPastChannelControlTimeLimit OBJECT-TYPE
        SYNTAX               Unsigned32
        UNITS                "seconds"
        MAX-ACCESS           read-write
        STATUS               current
        DESCRIPTION
           "The maximum time in seconds which an entry for this
            running application element or service instance
            may exist in the applPastChannelTable before it
            is removed.  Any entry that is older than this value
            will be removed (aged out) from the table, unless the

            applPastChannelControlCollect is set to 'frozen'.

            Note that an entry may be aged out prior to reaching
            this time limit if it is the oldest entry in the table
            and must be removed to make space for a new entry so
            as to not exceed applPastChannelControlMaxRows, or if the
            applPastChannelControlCollect is set to 'disabled'."
        DEFVAL          { 7200 }
        ::= { applPastChannelControlEntry 3 }

applPastChannelControlRemItems OBJECT-TYPE
        SYNTAX              Counter32
        UNITS               "channel history entries"
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
           "The applPastChannelControlRemItems attribute reports the
            number of applPastChannelControlTable entries for this
            running application element or service instance that
            were deleted in order to make room for new history
            entries.

            This count does NOT include entries deleted for the
            following reasons:
                - the corresponding applPastChannelControlCollect
                  attribute has been set to 'disabled'

                - the entry has been in the table longer that the
                  time limit indicated by the corresponding
                  applPastChannelControlTimeLimit.
          "
        ::= { applPastChannelControlEntry 4 }

-- ****************************************************************
--
--      applPastChannelTable - Table of former channels
--
-- ****************************************************************

applPastChannelTable   OBJECT-TYPE
        SYNTAX         SEQUENCE OF ApplPastChannelEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION
           "The applPastChannelTable provides history information
            about channels from the perspective of running
            application elements and service instances.

            Entries in this table are indexed by applElmtOrSvc,
            applElmtOrSvcId, and by applPastChannelIndex, which
            serves to uniquely identify each former channel in the
            context of a running application element or service
            instance.

            Note that the value of applPastChannelIndex is
            independent of the value applOpenChannelIndex had when
            this channel was open.

            Entries for closed channels for a given running
            application element or service instance can
            be added to this table only if its entry in the
            applPastChannelControlTable has the value 'enabled'
            for the attribute applPastChannelControlCollect.

            Entries for closed channels are removed under the
            following circumstances:

                - the running application element or service
                  instance no longer exists

                - the corresponding applPastChannelControlCollect
                  attribute has been set to 'disabled'

                - the entry has been in the table longer that the
                  time limit indicated by the corresponding
                  applPastChannelControlTimeLimit and the value of
                  applPastChannelControlCollect is not 'frozen'

                - this is the oldest entry for the running
                  application element or service instance in
                  question and the addition of a new element would
                  otherwise cause applPastChannelControlMaxRows to
                  be exceeded for this running application element
                  or service instance.

                - a value of applPastChannelIndex has been re-used.
                  Note that under normal circumstances, this is
                  unlikely.

            Removal/replacement of an entry under the
            last two conditions causes the corresponding
            applPastChannelControlRemItems to be incremented."
        ::= { applPastChannelGroup 2 }

applPastChannelEntry   OBJECT-TYPE
        SYNTAX         ApplPastChannelEntry
        MAX-ACCESS     not-accessible
        STATUS         current
        DESCRIPTION
          "An applPastChannelEntry indicates that a running
           application element or service instance once had an open
           channel, which is now closed.  The entry has information
           describing that channel."
        INDEX       { applElmtOrSvc, applElmtOrSvcId,
                      applPastChannelIndex }
        ::= { applPastChannelTable 1 }

ApplPastChannelEntry  ::= SEQUENCE
        {
                applPastChannelIndex           Unsigned32,
                applPastChannelOpenTime        DateAndTime,
                applPastChannelCloseTime       DateAndTime,
                applPastChannelReadRequests    Unsigned64TC,
                applPastChannelReadReqsLow     Unsigned32,
                applPastChannelReadFailures    Unsigned32,
                applPastChannelBytesRead       Unsigned64TC,
                applPastChannelBytesReadLow    Unsigned32,
                applPastChannelLastReadTime    DateAndTime,
                applPastChannelWriteRequests   Unsigned64TC,
                applPastChannelWriteReqsLow    Unsigned32,
                applPastChannelWriteFailures   Unsigned32,
                applPastChannelBytesWritten    Unsigned64TC,
                applPastChannelBytesWritLow    Unsigned32,
                applPastChannelLastWriteTime   DateAndTime
        }

applPastChannelIndex      OBJECT-TYPE
        SYNTAX            Unsigned32 (1..'ffffffff'h)
        MAX-ACCESS        not-accessible
        STATUS            current
        DESCRIPTION
           "This attribute serves to uniquely identify this closed
            channel in the context of the running application
            element or service instance.  This attribute has no
            other semantics.

            Note that the value of applPastChannelIndex is
            independent of the value applOpenChannelIndex had when
            this channel was active.

            In issuing this index value, the implementation must
            avoid re-issuing an index value which has already been

            assigned to an entry which has not yet been deleted due
            to age or space considerations.

            The value zero is excluded from the set of permitted
            values for this index in order to permit other tables to
            possibly represent information that cannot be associated
            with a specific entry in this table.  "
        ::= { applPastChannelEntry 1 }

applPastChannelOpenTime OBJECT-TYPE
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "This attribute records the time when this channel was
            originally opened.  Note that this information is quite
            different from applOpenChannelOpenTime, which is used
            for the detection of counter discontinuities."
        ::= { applPastChannelEntry 2 }

applPastChannelCloseTime OBJECT-TYPE
        SYNTAX           DateAndTime
        MAX-ACCESS       read-only
        STATUS           current
        DESCRIPTION
           "This attribute records the time when this channel
            was closed."
        ::= { applPastChannelEntry 3 }

applPastChannelReadRequests OBJECT-TYPE
        SYNTAX              Unsigned64TC
        UNITS               "read requests"
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
           "This attribute records the number of read requests for
            this channel made by this running application element or
            service instance.  All read requests for this channel by
            this running application element or service instance,
            regardless of completion status, are included in this
            count.  Read requests are counted in terms of system
            calls, rather than API calls."
        ::= { applPastChannelEntry 4 }

applPastChannelReadReqsLow OBJECT-TYPE
        SYNTAX             Unsigned32
        UNITS              "read requests"
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
           "This attribute corresponds to the low thirty-two bits
            of applPastChannelReadRequests."
        ::= { applPastChannelEntry 5 }

applPastChannelReadFailures OBJECT-TYPE
        SYNTAX              Unsigned32
        UNITS               "failed read requests"
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
           "This attribute reports the number of failed read
            requests."
        ::= { applPastChannelEntry 6 }

applPastChannelBytesRead OBJECT-TYPE
        SYNTAX           Unsigned64TC
        UNITS            "bytes"
        MAX-ACCESS       read-only
        STATUS           current
        DESCRIPTION
           "This attribute reports the number of bytes read from this
            channel by this running application element or service
            instance.  Only bytes successfully read are included in
            this count. "
        ::= { applPastChannelEntry 7 }

applPastChannelBytesReadLow OBJECT-TYPE
        SYNTAX              Unsigned32
        UNITS               "bytes"
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
           "This attribute corresponds to the low thirty-two bits
            of applPastChannelBytesRead."
        ::= { applPastChannelEntry 8 }

applPastChannelLastReadTime OBJECT-TYPE
        SYNTAX              DateAndTime
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
           "This attribute reports the time of the most recent read
            request made by this running application element or
            service instance regardless of completion status, for
            this former channel.

            If no read requests have been made , the value of this
            attribute shall be '0000000000000000'H "
        DEFVAL { '0000000000000000'H }
        ::= { applPastChannelEntry 9 }

applPastChannelWriteRequests OBJECT-TYPE
        SYNTAX               Unsigned64TC
        UNITS                "write requests"
        MAX-ACCESS           read-only
        STATUS               current
        DESCRIPTION
           "The applPastChannelWriteRequests attribute reports
            the number of write requests, regardless of completion
            status, made by this running application element or
            service instance for this former channel.

            Write requests are counted in terms of system calls,
            rather than API calls."
        ::= { applPastChannelEntry 10 }

applPastChannelWriteReqsLow OBJECT-TYPE
        SYNTAX              Unsigned32
        UNITS               "write requests"
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
           "This attribute corresponds to the low thirty-two
            bits of applPastChannelWriteRequests."
        ::= { applPastChannelEntry 11 }

applPastChannelWriteFailures OBJECT-TYPE
        SYNTAX               Unsigned32
        UNITS                "failed write requests"
        MAX-ACCESS           read-only
        STATUS               current
        DESCRIPTION
           "This attribute reports the number of failed write
            requests."
        ::= { applPastChannelEntry 12 }

applPastChannelBytesWritten OBJECT-TYPE
        SYNTAX              Unsigned64TC
        UNITS               "bytes"
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
           "This attribute reports the number of bytes written to
            this former channel by this running application element
            or service instance.  Only bytes successfully written
            (no errors reported by the API in use by the application)
            are included in this count."
        ::= { applPastChannelEntry 13 }

applPastChannelBytesWritLow OBJECT-TYPE
        SYNTAX              Unsigned32
        UNITS               "bytes"
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
           "This attribute corresponds to the low thirty-two bits of
            applPastChannelBytesWritten."
        ::= { applPastChannelEntry 14 }

applPastChannelLastWriteTime OBJECT-TYPE
        SYNTAX               DateAndTime
        MAX-ACCESS           read-only
        STATUS               current
        DESCRIPTION
           "The applPastChannelLastWriteTime attribute reports
            the time of the most recent write request made by
            this running application element or service instance,
            regardless of completion status, for this former
            channel.

            If no write requests have been made the value of this
            attribute shall be '0000000000000000'H "
        DEFVAL { '0000000000000000'H }
        ::= { applPastChannelEntry 15 }

-- ****************************************************************
--
--      applPastFileTable - information specific to former files
--
-- ****************************************************************

applPastFileTable  OBJECT-TYPE
        SYNTAX     SEQUENCE OF ApplPastFileEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
           "The applPastFileTable supplements the
            applPastChannelTable for entries corresponding to
            channels which were files.  The indexing structure is
            identical to applPastChannelTable.  An entry exists in
            the applPastFileTable only if there is a corresponding
            (same index values) entry in the applPastChannelTable
            and if the channel was a file.

            Entries for closed files are removed when the
            corresponding entries are removed from the
            applPastChannelTable."
        ::= { applPastChannelGroup 3 }

applPastFileEntry   OBJECT-TYPE
        SYNTAX      ApplPastFileEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "An applPastFileEntry provides additional, file-specific
           information to complement the corresponding
           applPastChannelEntry for a channel which was a file."
        INDEX       { applElmtOrSvc, applElmtOrSvcId,
                      applPastChannelIndex }
        ::= { applPastFileTable 1 }

ApplPastFileEntry ::= SEQUENCE
        {
                applPastFileName                LongUtf8String,
                applPastFileSizeHigh            Unsigned32,
                applPastFileSizeLow             Unsigned32,
                applPastFileMode                INTEGER
        }

applPastFileName   OBJECT-TYPE
        SYNTAX     LongUtf8String
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
          "This attribute records the last known value of
           applOpenFileName before the channel was closed."
        ::= { applPastFileEntry 1 }

applPastFileSizeHigh OBJECT-TYPE
        SYNTAX       Unsigned32
        UNITS        "2^32 byte blocks"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
          "This attribute records the value of applOpenFileSizeHigh
           at the time this channel was closed.

           For example, for a file with a total size of
           4,294,967,296 bytes, this attribute would have a value
           of 1; for a file with a total size of 4,294,967,295
           bytes this attribute's value would be 0."
        ::= { applPastFileEntry 2 }

applPastFileSizeLow OBJECT-TYPE
        SYNTAX      Unsigned32
        UNITS       "bytes"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           "This attribute records the value of applOpenFileSizeLow
            at the time this channel was closed.

            For example, for a file with a total size of
            4,294,967,296 bytes this attribute would have a value
            of 0; for a file with a total size of 4,294,967,295
            bytes this attribute's value would be 4,294,967,295."
        ::= { applPastFileEntry 3 }

applPastFileMode   OBJECT-TYPE
        SYNTAX     INTEGER { read(1),
                             write(2),
                             readWrite(3) }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
           "This attribute records the value of applOpenFileMode
            at the time this channel was closed.  "
        ::= { applPastFileEntry 4 }

-- ****************************************************************
--
--      applPastConTable - information specific to former connections
--
-- ****************************************************************

applPastConTable OBJECT-TYPE
        SYNTAX    SEQUENCE OF ApplPastConEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
           "The applPastConTable supplements the applPastChannelTable
            for entries corresponding to channels which were
            connections.  The indexing structure is identical
            to applPastChannelTable.  An entry exists in the
            applPastConTable only if there is a corresponding
            (same index values) entry in the applPastChannelTable
            and if the channel was a connection.

            Entries for closed connections are removed when
            the corresponding entries are removed from the
            applPastChannelTable."
        ::= { applPastChannelGroup 4 }

applPastConEntry   OBJECT-TYPE
        SYNTAX      ApplPastConEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "An applPastConEntry provides additional,
           connection-specific information to complement the
           corresponding applPastChannelEntry for a channel which
           was a connection."
        INDEX       { applElmtOrSvc, applElmtOrSvcId,
                      applPastChannelIndex }
        ::= { applPastConTable 1 }

ApplPastConEntry ::= SEQUENCE
        {
                applPastConTransport       TDomain,
                applPastConNearEndAddr     ApplTAddress,
                applPastConNearEndpoint    SnmpAdminString,
                applPastConFarEndAddr      ApplTAddress,
                applPastConFarEndpoint     SnmpAdminString,
                applPastConApplication     SnmpAdminString
        }

applPastConTransport OBJECT-TYPE
        SYNTAX       TDomain
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The applPastConTransport attribute identifies the
            transport protocol that was in use for this former
            connection.  If the transport protocol could not be
            determined, the value { 0 0 } shall be used."
        DEFVAL { zeroDotZero }
        ::= { applPastConEntry 1 }

applPastConNearEndAddr OBJECT-TYPE
        SYNTAX         ApplTAddress
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
           "The applPastConNearEndAddr attribute reports the
            transport address and port information for the near
            end of this former connection.

            If the information could not be determined, the value
            shall be a zero-length string."
        DEFVAL { "" }
        ::= { applPastConEntry 2 }

applPastConNearEndpoint OBJECT-TYPE
        SYNTAX          SnmpAdminString
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "The applPastConNearEndpoint attribute reports the
            fully-qualified domain name and port information for the
            near end of this former connection.

            The format of this attribute for TCP and UDP-based
            protocols is the fully-qualified domain name immediately
            followed by a colon which is immediately followed by
            the decimal representation of the port number.

            If the information could not be determined, the value
            shall be a zero-length string."
        DEFVAL { "" }
        ::= { applPastConEntry 3 }

applPastConFarEndAddr OBJECT-TYPE
        SYNTAX        ApplTAddress
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION
           "The applPastConFarEnd attribute reports the transport
            address and port information for the far end of this

            former connection.

            If not known, as in the case of a connectionless
            transport, the value of this attribute shall be a
            zero-length string."
        DEFVAL { "" }
        ::= { applPastConEntry 4 }

applPastConFarEndpoint OBJECT-TYPE
        SYNTAX        SnmpAdminString
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION
           "The applPastConFarEndpoint attribute reports the
            transport address and port information for the far
            end of this former connection.

            The format of this attribute for TCP and UDP-based
            protocols is the fully-qualified domain name immediately
            followed by a colon which is immediately followed by
            the decimal representation of the port number.

            If not known, as in the case of a connectionless
            transport, the value of this attribute shall be a
            zero-length string."
        DEFVAL { "" }
        ::= { applPastConEntry 5 }

applPastConApplication OBJECT-TYPE
        SYNTAX         SnmpAdminString
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
           "The applPastConApplication attribute identifies the
            application layer protocol that was in use.  Where
            possible, the values defined in [13] shall be used.
            If not known, the value of this attribute shall be a
            zero-length string."
        DEFVAL { "" }
        ::= { applPastConEntry 6 }

-- ****************************************************************
--
--      applPastTransStreamTable - historical
--      information for transaction stream monitoring
--
-- ****************************************************************

applPastTransStreamTable OBJECT-TYPE
        SYNTAX             SEQUENCE OF ApplPastTransStreamEntry
        MAX-ACCESS         not-accessible
        STATUS             current
        DESCRIPTION
           "The applPastTransStreamTable contains common
            information for historical transaction statistics."
        ::= { applPastChannelGroup 5 }

applPastTransStreamEntry OBJECT-TYPE
        SYNTAX             ApplPastTransStreamEntry
        MAX-ACCESS         not-accessible
        STATUS             current
        DESCRIPTION
           "An applPastTransStreamEntry contains information for
            a single former transaction stream.  A transaction
            stream could have been a network connection, file, or
            other source of transactions."
        INDEX           { applElmtOrSvc, applElmtOrSvcId,
                          applPastChannelIndex }
        ::= { applPastTransStreamTable 1 }

ApplPastTransStreamEntry ::= SEQUENCE {
        applPastTransStreamDescr        SnmpAdminString,
        applPastTransStreamUnitOfWork   SnmpAdminString,
        applPastTransStreamInvokes      Unsigned64TC,
        applPastTransStreamInvokesLow   Unsigned32,
        applPastTransStreamInvCumTimes  Unsigned32,
        applPastTransStreamInvRspTimes  Unsigned32,
        applPastTransStreamPerforms     Unsigned64TC,
        applPastTransStreamPerformsLow  Unsigned32,
        applPastTransStreamPrfCumTimes  Unsigned32,
        applPastTransStreamPrfRspTimes  Unsigned32 }
applPastTransStreamDescr OBJECT-TYPE
        SYNTAX          SnmpAdminString
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "The applPastTransStreamDescr attribute provides a
            human-readable description of this transaction stream.

            If no descriptive information is available, this
            attribute's value shall be a zero-length string."
        DEFVAL { "" }
        ::= { applPastTransStreamEntry 1 }

applPastTransStreamUnitOfWork OBJECT-TYPE
        SYNTAX               SnmpAdminString
        MAX-ACCESS           read-only
        STATUS               current
        DESCRIPTION
           "The applPastTransStreamUnitOfWork attribute provides a
            human-readable definition of what the unit of work is
            for this transaction stream.

            If no descriptive information is available, this
            attribute's value shall be a zero-length string."
        DEFVAL { "" }
        ::= { applPastTransStreamEntry 2 }

applPastTransStreamInvokes OBJECT-TYPE
        SYNTAX            Unsigned64TC
        UNITS             "transactions"
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
           "Cumulative count of requests / invocations issued
            for this transaction stream when it was active."
        ::= { applPastTransStreamEntry 3 }

applPastTransStreamInvokesLow OBJECT-TYPE
        SYNTAX               Unsigned32
        UNITS                "transactions"
        MAX-ACCESS           read-only
        STATUS               current
        DESCRIPTION
           "This object corresponds to the low thirty-two
            bits of applPastTransStreamInvokes."
        ::= { applPastTransStreamEntry 4 }

applPastTransStreamInvCumTimes OBJECT-TYPE
        SYNTAX                Unsigned32
        UNITS                 "milliseconds"
        MAX-ACCESS            read-only
        STATUS                current
        DESCRIPTION
           "The applPastTransStreamInvCumTimes attribute reports the
            cumulative sum of the lengths of the intervals times
            measured between the transmission of requests and the
            receipt of (the first of) the corresponding response(s)."
        ::= { applPastTransStreamEntry 5 }

applPastTransStreamInvRspTimes OBJECT-TYPE
        SYNTAX                Unsigned32
        UNITS                 "milliseconds"
        MAX-ACCESS            read-only
        STATUS                current
        DESCRIPTION
           "The applPastTransStreamInvRspTimes attribute reports the
            cumulative sum of the lengths of the intervals measured
            between the receipt of the first and last of multiple
            responses to a request.

            For transaction streams which do not permit multiple
            responses to a single request, this attribute will be
            zero."
        ::= { applPastTransStreamEntry 6 }

applPastTransStreamPerforms OBJECT-TYPE
        SYNTAX             Unsigned64TC
        UNITS              "transactions"
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
           "Total number of transactions performed."
        ::= { applPastTransStreamEntry 7 }

applPastTransStreamPerformsLow OBJECT-TYPE
        SYNTAX                Unsigned32
        UNITS                 "transactions"
        MAX-ACCESS            read-only
        STATUS                current
        DESCRIPTION
           "This objecy reports the low thirty-two bits of
            applPastTransStreamPerforms."
        ::= { applPastTransStreamEntry 8 }

applPastTransStreamPrfCumTimes OBJECT-TYPE
        SYNTAX                Unsigned32
        UNITS                 "milliseconds"
        MAX-ACCESS            read-only
        STATUS                current
        DESCRIPTION
           "The applPastTransStreamPrfCumTimes attribute reports the
            cumulative sum of the lengths of the intervals measured
            between receipt of requests and the transmission of the
            corresponding responses."
        ::= { applPastTransStreamEntry 9 }

applPastTransStreamPrfRspTimes OBJECT-TYPE
        SYNTAX                 Unsigned32
        UNITS                  "milliseconds"
        MAX-ACCESS             read-only
        STATUS                 current
        DESCRIPTION
           "For each transaction performed, the elapsed time between
            when the first response is enqueued and when the last
            response is enqueued is added to this cumulative sum.

            For single-response protocols, the value of
            applPastTransStreamPrfRspTimes will be zero."
        ::= { applPastTransStreamEntry 10 }

-- ****************************************************************
--
--      applPastTransFlowTable
--
-- ****************************************************************

applPastTransFlowTable OBJECT-TYPE
        SYNTAX        SEQUENCE OF ApplPastTransFlowEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION
           "The applPastTransFlowTable contains entries, organized by
            application instance or running application element,
            direction of flow, and type (request/response) for each
            former transaction stream.

            The simple model of a transaction used here looks like
            this:

                invoker  |   Request     | performer
                         | - - - - - - > |
                         |               |
                         |   Response    |
                         | < - - - - - - |
                         |               |

            Since in some protocols it is possible for an entity
            to take on both the invoker and performer roles,
            information here is accumulated for transmitted and
            received requests, as well as for transmitted and
            received responses.  Counts are maintained for both
            transactions and bytes transferred."
        ::= { applPastChannelGroup 6 }

applPastTransFlowEntry OBJECT-TYPE
        SYNTAX        ApplPastTransFlowEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION
           "An applPastTransFlowEntry records transaction throughput
            information for requests or response in a particular
            direction (transmit / receive) for a transaction stream.

            Entries in this table correspond to those in the
            applPastTransStreamTable with identical values
            for the applElmtOrSvc, applElmtOrSvcId, and the
            applPastChannelIndex."
        INDEX           { applElmtOrSvc,
                          applElmtOrSvcId,
                          applPastChannelIndex,
                          applPastTransFlowDirection,
                          applPastTransFlowReqRsp }
        ::= { applPastTransFlowTable 1 }

ApplPastTransFlowEntry ::= SEQUENCE {
                applPastTransFlowDirection INTEGER,
                applPastTransFlowReqRsp    INTEGER,
                applPastTransFlowTrans     Unsigned64TC,
                applPastTransFlowTransLow  Unsigned32,
                applPastTransFlowBytes     Unsigned64TC,
                applPastTransFlowBytesLow  Unsigned32,
                applPastTransFlowTime      DateAndTime }

applPastTransFlowDirection OBJECT-TYPE
        SYNTAX             INTEGER { transmit(1),
                                     receive(2) }
        MAX-ACCESS         not-accessible
        STATUS             current
        DESCRIPTION
            "The applPastTransFlowDirection index serves
             to identify an entry as containing information
             pertaining to the transmit (1) or receive (2) flow
             of a past transaction stream.  This index corresponds
             to applTransactFlowDirection."
        ::= { applPastTransFlowEntry 1 }

applPastTransFlowReqRsp OBJECT-TYPE
        SYNTAX          INTEGER { request(1),
                                  response(2) }
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
           "The value of the applPastTransFlowReqRsp index indicates
            whether this entry contains information on requests
            (1), or responses (2).  This index corresponds to
            applTransactFlowReqRsp."
        ::= { applPastTransFlowEntry 2 }

applPastTransFlowTrans OBJECT-TYPE
        SYNTAX        Unsigned64TC
        UNITS         "transactions"
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION
            "The applPastTransFlowTrans attribute reports the number
             of request/response (as indicated by the
             applPastTransFlowReqRsp index) transactions
             received/generated (as indicated by the
             applPastTransFlowDirection index) handled on this
             transaction stream."
        ::= { applPastTransFlowEntry 3 }

applPastTransFlowTransLow OBJECT-TYPE
        SYNTAX           Unsigned32
        UNITS            "transactions"
        MAX-ACCESS       read-only
        STATUS           current
        DESCRIPTION
            "This attribute corresponds to the low thirty-two
             bits of applPastTransFlowTrans."
        ::= { applPastTransFlowEntry 4 }

applPastTransFlowBytes OBJECT-TYPE
        SYNTAX        Unsigned64TC
        UNITS         "bytes"
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION
           "The applPastTransFlowBytes attribute reports the number
            of request/response (as indicated by the
            applPastTransFlowReqRsp index) bytes received/generated
            (as indicated by the applPastTransFlowDirection index)
            handled on this transaction stream.

            All application layer bytes are included in this count,
            including any application layer wrappers, headers, or
            other overhead."
        ::= { applPastTransFlowEntry 5 }

applPastTransFlowBytesLow OBJECT-TYPE
        SYNTAX           Unsigned32
        UNITS            "bytes"
        MAX-ACCESS       read-only
        STATUS           current
        DESCRIPTION
           "This attribute corresponds to the low thirty-two
            bits of applPastTransFlowBytes."
        ::= { applPastTransFlowEntry 6 }

applPastTransFlowTime OBJECT-TYPE
        SYNTAX       DateAndTime
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The applPastTransFlowTime attribute records the time of
            the processing (receipt or transmission as
            indicated by the applPastTransFlowDirection index)
            of the last request/response (as indicated by the
            applPastTransFlowReqRsp index) on this transaction
            stream.

            If no requests/responses been received/transmitted by
            this entity over this transaction stream, the value
            of this attribute shall be '0000000000000000'H "
        DEFVAL { '0000000000000000'H }
        ::= { applPastTransFlowEntry 7 }

-- ****************************************************************
--
--      applPastTransKindTable - transaction statistics broken down
--      according to the kinds of transactions in each direction
--      for a transaction stream.
--
-- ****************************************************************

applPastTransKindTable   OBJECT-TYPE
        SYNTAX SEQUENCE OF ApplPastTransKindEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
           "The applPastTransKindTable provides transaction
            statistics broken down by kinds of transaction.
            The definition of the kinds of transactions is
            specific to the application protocol in use, and may be
            documented in the form of an applicability statement.  "
        ::= { applPastChannelGroup 7 }

applPastTransKindEntry OBJECT-TYPE
        SYNTAX        ApplPastTransKindEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION
           "An applPastTransKindEntry reports historical data for a
            specific service instance or running application
            element's use of a specific transaction stream in
            a particular direction in requests or responses
            (as indicated by the applPastTransFlowReqRsp index)
            broken down by transaction kind, as indicated by the
            applPastTransKind index."
        INDEX           { applElmtOrSvc,
                          applElmtOrSvcId,
                          applPastChannelIndex,
                          applPastTransFlowDirection,
                          applPastTransFlowReqRsp,
                          applPastTransKind }
        ::= { applPastTransKindTable 1 }

ApplPastTransKindEntry ::= SEQUENCE
        {
                applPastTransKind                SnmpAdminString,
                applPastTransKindTrans           Unsigned64TC,
                applPastTransKindTransLow        Unsigned32,
                applPastTransKindBytes           Unsigned64TC,
                applPastTransKindBytesLow        Unsigned32,
                applPastTransKindTime            DateAndTime
        }

applPastTransKind   OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE (1 .. 32))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
           "The applPastTransKind index is the human-readable
            identifier for a particular transaction kind within
            the context of an application protocol.  The values
            to be used for a particular protocol may be identified
            in an applicability statement.  This index corresponds
            to applTransactKind."
        ::= { applPastTransKindEntry 1 }

applPastTransKindTrans OBJECT-TYPE
        SYNTAX        Unsigned64TC
        UNITS         "transactions"
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION
           "For this transaction stream, this attribute records
            the total number of transactions of the type
            identified by the indexes.  The type is characterized
            according to the receive/transmit direction
            (applPastTransFlowDirecton), whether it was a request
            or a response (applPastTransFlowReqRsp), and the
            protocol-specific transaction kind (applPastTransKind).
            stream for this transaction kind."
        ::= { applPastTransKindEntry 2 }

applPastTransKindTransLow OBJECT-TYPE
        SYNTAX           Unsigned32
        UNITS            "transactions"
        MAX-ACCESS       read-only
        STATUS           current
        DESCRIPTION
           "The applPastTransKindTransLow attribute reports
            the low thirty-two bits of applPastTransKindTrans."
        ::= { applPastTransKindEntry 3 }

applPastTransKindBytes OBJECT-TYPE
        SYNTAX        Unsigned64TC
        UNITS         "bytes"
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION
           "For this transaction stream and transaction kind, the
            applPastTransKindBytes attribute reports the number
            of bytes received or generated (as indicated by
            the applPastTransFlowDirection index) in requests or
            responses (as indicated by the applPastTransFlowReqRsp
            index).

            All application layer bytes are included in this count,
            including any application layer wrappers, headers, or
            other overhead."
        ::= { applPastTransKindEntry 4 }

applPastTransKindBytesLow OBJECT-TYPE
        SYNTAX           Unsigned32
        UNITS            "bytes"
        MAX-ACCESS       read-only
        STATUS           current
        DESCRIPTION
           "The applPastTransKindBytesLow attribute corresponds
            to the low thirty-two bits of applPastTransKindBytes."
        ::= { applPastTransKindEntry 5 }

applPastTransKindTime OBJECT-TYPE
        SYNTAX       DateAndTime
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The applPastTransKindTime attribute records the time of
            the processing (receipt or transmission as
            indicated by the applPastTransFlowDirection index)
            of the last request/response (as indicated by the
            applPastTransFlowReqRsp index) of this kind of
            transaction on this transaction stream.

            If no requests/responses of this kind were
            received/transmitted over this transaction stream, the
            value of this attribute shall be '0000000000000000'H "
        DEFVAL { '0000000000000000'H }
        ::= { applPastTransKindEntry 6 }

-- ****************************************************************
--
--      applElmtRunControlGroup - monitor and control running
--      application elements
--
-- ****************************************************************

applElmtRunStatusTable OBJECT-TYPE
        SYNTAX         SEQUENCE OF ApplElmtRunStatusEntry
        MAX-ACCESS     not-accessible
        STATUS         current
        DESCRIPTION
           "This table provides information on running application
            elements, complementing information available in the
            correspondingly indexed sysApplElmtRunTable [31]."
        ::= { applElmtRunControlGroup 1 }

applElmtRunStatusEntry OBJECT-TYPE
        SYNTAX         ApplElmtRunStatusEntry
        MAX-ACCESS     not-accessible
        STATUS         current
        DESCRIPTION
          "An applElmtRunStatusEntry contains information to support
           the control and monitoring of a single running application
           element."
        INDEX { sysApplElmtRunIndex }
        ::= { applElmtRunStatusTable 1 }

ApplElmtRunStatusEntry ::= SEQUENCE {
        applElmtRunStatusSuspended              TruthValue,
        applElmtRunStatusHeapUsage              Unsigned32,
        applElmtRunStatusOpenConnections        Unsigned32,
        applElmtRunStatusOpenFiles              Gauge32,
        applElmtRunStatusLastErrorMsg           SnmpAdminString,
        applElmtRunStatusLastErrorTime          DateAndTime }

applElmtRunStatusSuspended OBJECT-TYPE
        SYNTAX             TruthValue
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
           "The applElmtRunStatusSuspended attribute reports
            whether processing by this running application element
            has been suspended, whether by management request or by
            other means."
        ::= { applElmtRunStatusEntry 1 }

applElmtRunStatusHeapUsage OBJECT-TYPE
        SYNTAX             Unsigned32
        UNITS              "bytes"
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
           "The applElmtRunStatusHeapUsage reports the current
            approximate heap usage by this running application
            element."
        ::= { applElmtRunStatusEntry 2 }

applElmtRunStatusOpenConnections OBJECT-TYPE
        SYNTAX                   Unsigned32
        UNITS                    "connections"
        MAX-ACCESS               read-only
        STATUS                   current
        DESCRIPTION
           "The applElmtRunStatusOpenConnections attribute reports
            the current number of open connections in use by this
            running application element."
        ::= { applElmtRunStatusEntry 3 }

applElmtRunStatusOpenFiles OBJECT-TYPE
        SYNTAX             Gauge32
        UNITS              "files"
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
           "The applElmtRunStatusOpenFiles attribute reports the

            current number of open files in use by this running
            application element."
        ::= { applElmtRunStatusEntry 4 }

applElmtRunStatusLastErrorMsg OBJECT-TYPE
        SYNTAX                SnmpAdminString
        MAX-ACCESS            read-only
        STATUS                current
        DESCRIPTION
           "The applElmtRunStatusLastErrorMessage attribute reports
            the most recent error message (typically written to
            stderr or a system error logging facility) from this
            running application element.  If no such message has yet
            been generated, the value of this attribute shall be a
            zero-length string."
        DEFVAL { "" }
        ::= { applElmtRunStatusEntry 5 }

applElmtRunStatusLastErrorTime OBJECT-TYPE
        SYNTAX                 DateAndTime
        MAX-ACCESS             read-only
        STATUS                 current
        DESCRIPTION
           "The applElmtRunStatusLastErrorTime attribute reports the
            time of the most recent error message in
            applElmtRunStatusLastErrorMsg.

            If no such message has yet been generated, the value
            of this attribute shall be '0000000000000000'H "
        DEFVAL { '0000000000000000'H }
        ::= { applElmtRunStatusEntry 6 }

-- ****************************************************************
--
--      applElmtRunControlTable - control running application
--      elements
--
-- ****************************************************************

applElmtRunControlTable OBJECT-TYPE
        SYNTAX          SEQUENCE OF ApplElmtRunControlEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
           "This table provides the ability to control application
            elements, complementing information available in the
            correspondingly indexed sysApplElmtRunTable [31]."
        ::= { applElmtRunControlGroup 2 }

applElmtRunControlEntry OBJECT-TYPE
        SYNTAX          ApplElmtRunControlEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
           "An applElmtRunControlEntry contains information to
           support the control of a single running application
           element."
        INDEX { sysApplElmtRunIndex }
        ::= { applElmtRunControlTable 1 }

ApplElmtRunControlEntry ::= SEQUENCE {
                applElmtRunControlSuspend       TruthValue,
                applElmtRunControlReconfigure   TestAndIncr,
                applElmtRunControlTerminate     TruthValue }

applElmtRunControlSuspend OBJECT-TYPE
        SYNTAX            TruthValue
        MAX-ACCESS        read-write
        STATUS            current
        DESCRIPTION
           "Setting this variable to 'true' requests the suspension
            of processing by this running application element.
            Setting this variable to 'false' requests that processing
            be resumed.  The effect, if any, will be reported by the
            applElmtRunStatusSuspended attribute."
        DEFVAL { false }
        ::= { applElmtRunControlEntry 1 }

applElmtRunControlReconfigure OBJECT-TYPE
        SYNTAX                TestAndIncr
        MAX-ACCESS            read-write
        STATUS                current
        DESCRIPTION
           "Changing the value of this variable requests that the
            running application element re-load its configuration
            (like SIGHUP for many UNIX-based daemons).

            Note that completion of a SET on this object only implies
            that configuration reload was initiated, not necessarily
            that the reload has been completed."
        ::= { applElmtRunControlEntry 2 }

applElmtRunControlTerminate OBJECT-TYPE
        SYNTAX              TruthValue
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION
           "Setting the value of applElmtRunControlTerminate to
            'true' requests that the running application element
            terminate processing and exit in an orderly manner.
            This is a 'polite' shutdown request.

            When read, this object's value will be 'false' except
            when orderly termination is in progress.

            Note that completion of a SET on this object only implies
            that termination was initiated, not necessarily that the
            termination has been completed."
        DEFVAL { false }
        ::= { applElmtRunControlEntry 3 }

-- ****************************************************************
--
--      Conformance requirements
--
-- ****************************************************************

applicationMibGroups OBJECT IDENTIFIER ::=
                        { applicationMibConformance 1}

applicationMonitorGroup OBJECT-GROUP
    OBJECTS { applSrvInstQual,
              applSrvName,
              applSrvIndex,
              applSrvInstance,
              applOpenChannelOpenTime,
              applOpenChannelReadRequestsLow,
              applOpenChannelReadFailures,
              applOpenChannelBytesReadLow,
              applOpenChannelLastReadTime,
              applOpenChannelWriteRequestsLow,
              applOpenChannelWriteFailures,
              applOpenChannelBytesWrittenLow,
              applOpenChannelLastWriteTime,
              applOpenFileName,
              applOpenFileSizeHigh,
              applOpenFileSizeLow,
              applOpenFileMode,
              applOpenConnectionTransport,
              applOpenConnectionNearEndAddr,
              applOpenConnectionNearEndpoint,
              applOpenConnectionFarEndAddr,
              applOpenConnectionFarEndpoint,
              applOpenConnectionApplication }
    STATUS current
    DESCRIPTION
        "This group represents the basic capabilities of this MIB."
    ::= { applicationMibGroups 1 }

applicationFastMonitorGroup OBJECT-GROUP
    OBJECTS { applOpenChannelReadRequests,
              applOpenChannelBytesRead,
              applOpenChannelWriteRequests,
              applOpenChannelBytesWritten }
    STATUS current
    DESCRIPTION
        "This group comprises 64-bit counters mandatory in
         high-throughput environments, where 32-bit counters
         could wrap in less than an hour."
    ::= { applicationMibGroups 2 }

applicationTransactGroup OBJECT-GROUP
    OBJECTS { applTransactStreamDescr,
              applTransactStreamUnitOfWork,
              applTransactStreamInvokesLow,
              applTransactStreamInvCumTimes,
              applTransactStreamInvRspTimes,
              applTransactStreamPerformsLow,
              applTransactStreamPrfCumTimes,
              applTransactStreamPrfRspTimes,
              applTransactFlowTransLow,
              applTransactFlowBytesLow,
              applTransactFlowTime,
              applTransactKindTransLow,
              applTransactKindBytesLow,
              applTransactKindTime }
    STATUS current
    DESCRIPTION
        "This group comprises objects appropriate from monitoring
         transaction-structured flows."
    ::= { applicationMibGroups 3 }

applicationFastTransactGroup OBJECT-GROUP
    OBJECTS { applTransactStreamInvokes,
              applTransactStreamPerforms,
              applTransactFlowTrans,
              applTransactFlowBytes,
              applTransactKindTrans,
              applTransactKindBytes }
    STATUS current
    DESCRIPTION
        "This group comprises 64-bit transaction counters required in
         high-throughput environments, where 32-bit counters could
         wrap in less than an hour."
    ::= { applicationMibGroups 4 }

applicationHistoryGroup OBJECT-GROUP
    OBJECTS { applPastChannelControlCollect,
              applPastChannelControlMaxRows,
              applPastChannelControlTimeLimit,
              applPastChannelControlRemItems,
              applPastChannelOpenTime,
              applPastChannelCloseTime,
              applPastChannelReadReqsLow,
              applPastChannelReadFailures,
              applPastChannelBytesReadLow,
              applPastChannelLastReadTime,
              applPastChannelWriteReqsLow,
              applPastChannelWriteFailures,
              applPastChannelBytesWritLow,
              applPastChannelLastWriteTime,
              applPastFileName,
              applPastFileSizeHigh,
              applPastFileSizeLow,
              applPastFileMode,
              applPastConTransport,
              applPastConNearEndAddr,
              applPastConNearEndpoint,
              applPastConFarEndAddr,
              applPastConFarEndpoint,
              applPastConApplication}
    STATUS current
    DESCRIPTION
        "This group models basic historical data."
    ::= { applicationMibGroups 5 }

applicationFastHistoryGroup OBJECT-GROUP
    OBJECTS { applPastChannelReadRequests,
              applPastChannelBytesRead,
              applPastChannelWriteRequests,
              applPastChannelBytesWritten}
    STATUS current
    DESCRIPTION
        "This group comprises additional 64-bit objects required
         for recording historical data in high-volume environments,
         where a 32-bit integer would be insufficient."
    ::= { applicationMibGroups 6 }

applicationTransHistoryGroup OBJECT-GROUP
    OBJECTS { applPastTransStreamDescr,
              applPastTransStreamUnitOfWork,
              applPastTransStreamInvokesLow,
              applPastTransStreamInvCumTimes,
              applPastTransStreamInvRspTimes,
              applPastTransStreamPerformsLow,
              applPastTransStreamPrfCumTimes,
              applPastTransStreamPrfRspTimes,
              applPastTransFlowTransLow,
              applPastTransFlowBytesLow,
              applPastTransFlowTime,
              applPastTransKindTransLow,
              applPastTransKindBytesLow,
              applPastTransKindTime }
    STATUS current
    DESCRIPTION
        "This group represents historical data for transaction-
         structured information streams."
    ::= { applicationMibGroups 7 }

applicationFastTransHistoryGroup OBJECT-GROUP
    OBJECTS { applPastTransFlowTrans,
              applPastTransFlowBytes,
              applPastTransKindTrans,
              applPastTransKindBytes,
              applPastTransStreamPerforms,
              applPastTransStreamInvokes }
    STATUS current
    DESCRIPTION
        "This group contains 64-bit objects required for historical
         records on high-volume transaction-structured streams,
         where 32-bit integers would be insufficient."
    ::= { applicationMibGroups 8 }

applicationRunGroup OBJECT-GROUP
    OBJECTS { applElmtRunStatusSuspended,
              applElmtRunStatusHeapUsage,
              applElmtRunStatusOpenConnections,
              applElmtRunStatusOpenFiles,
              applElmtRunStatusLastErrorMsg,
              applElmtRunStatusLastErrorTime,
              applElmtRunControlSuspend,
              applElmtRunControlReconfigure,
              applElmtRunControlTerminate }
    STATUS current
    DESCRIPTION
        "This group represents extensions to the system application
         MIB."
    ::= { applicationMibGroups 9 }

applicationMibCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "The compliance statement for the application MIB."
    MODULE
        MANDATORY-GROUPS { applicationMonitorGroup,
                           applicationHistoryGroup,
                           applicationRunGroup }

            OBJECT applPastChannelControlCollect
                MIN-ACCESS read-only
                DESCRIPTION
                    "This object should be limited to read-only
                     access in environments with inadequate
                     security."

            OBJECT applPastChannelControlMaxRows
                MIN-ACCESS read-only
                DESCRIPTION
                    "This object should be limited to read-only
                     access in environments with inadequate
                     security."

            OBJECT applPastChannelControlTimeLimit
                MIN-ACCESS read-only
                DESCRIPTION
                    "This object should be limited to read-only
                     access in environments with inadequate
                     security."

            OBJECT applElmtRunControlSuspend
                MIN-ACCESS read-only
                DESCRIPTION
                    "This object should be limited to read-only
                     access in environments with inadequate
                     security."

            OBJECT applElmtRunControlReconfigure
                MIN-ACCESS read-only
                DESCRIPTION
                    "This object should be limited to read-only
                     access in environments with inadequate
                     security."

            OBJECT applElmtRunControlTerminate
                MIN-ACCESS read-only
                DESCRIPTION
                    "This object should be limited to read-only
                     access in environments with inadequate
                     security."

        GROUP applicationTransactGroup
        DESCRIPTION
            "The applicationTransactGroup is required when the
             information stream processed has a transaction
             structure. "

        GROUP applicationTransHistoryGroup
        DESCRIPTION
            "The applicationTransHistoryGroup must be implemented
             if applicationTransactGroup and applicationHistoryGroup
             are implemented."

        GROUP applicationFastMonitorGroup
        DESCRIPTION
           "The applicationFastMonitorGroup is mandatory when
            the applicationMonitorGroup is implemented and its
            counts group may exceed what can be represented in 32 bits."

        GROUP applicationFastTransactGroup
        DESCRIPTION
           "The applicationFastTransactGroup is mandatory when
            the applicationTransactGroup is implemented and its
            counts may exceed what can be represented in 32 bits."

        GROUP applicationFastHistoryGroup
        DESCRIPTION
           "The applicationFastHistoryGroup is mandatory when
            the applicationHistoryGroup is implemented and its
            counts may exceed what can be represented in 32 bits."

        GROUP applicationFastTransHistoryGroup
        DESCRIPTION
           "The applicationFastTransHistoryGroup is mandatory when
            the applicationTransHistoryGroup is implemented and its
            counts may exceed what can be represented in 32 bits."
    ::= { applicationMibConformance 2 }

END