Peler

: / usr / share / snmp / mibs / ietf /
Filename : ADSL-LINE-MIB
back
ADSL-LINE-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    Counter32, Gauge32,
    NOTIFICATION-TYPE,
    transmission, Unsigned32          FROM SNMPv2-SMI
    RowStatus,
    TruthValue, VariablePointer       FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP,
    NOTIFICATION-GROUP                FROM SNMPv2-CONF
    ifIndex                           FROM IF-MIB
    PerfCurrentCount,
    PerfIntervalCount                 FROM PerfHist-TC-MIB

    SnmpAdminString                   FROM SNMP-FRAMEWORK-MIB
    AdslPerfCurrDayCount,
    AdslPerfPrevDayCount,
    AdslPerfTimeElapsed,
    AdslLineCodingType                FROM ADSL-TC-MIB
    ;

adslMIB MODULE-IDENTITY

LAST-UPDATED "9908190000Z"

ORGANIZATION "IETF ADSL MIB Working Group"

CONTACT-INFO
    "
    Gregory Bathrick
    AG Communication Systems
    A Subsidiary of Lucent Technologies
    2500 W Utopia Rd.
    Phoenix, AZ 85027 USA
    Tel: +1 602-582-7679
    Fax: +1 602-582-7697
    E-mail: bathricg@agcs.com

    Faye Ly
    Copper Mountain Networks
    Norcal Office
    2470 Embarcadero Way
    Palo Alto, CA 94303
    Tel: +1 650-858-8500
    Fax: +1 650-858-8085
    E-Mail: faye@coppermountain.com

    (ADSL Forum input only)
    John Burgess
    Predictive Systems, Inc.
    25A Vreeland Rd.
    Florham Park, NJ 07932 USA
    Tel: +1 973-301-5610
    Fax: +1 973-301-5699
    E-mail: jtburgess@predictive.com

    IETF ADSL MIB Working Group (adsl@xlist.agcs.com)
    "
DESCRIPTION
    "The MIB module defining objects for the management of a pair of
    ADSL modems at each end of the ADSL line.  Each such line has

    an entry in an ifTable which may include multiple modem lines.
    An agent may reside at either end of the ADSL line however the
    MIB is designed to require no management communication between
    them beyond that inherent in the low-level ADSL line protocol.
    The agent may monitor and control this protocol for its needs.

    ADSL lines may support optional Fast or Interleaved channels.
    If these are supported, additional entries corresponding to the
    supported channels must be created in the ifTable. Thus an ADSL
    line that supports both channels will have three entries in the
    ifTable, one for each physical, fast, and interleaved, whose
    ifType values are equal to adsl(94), fast(125), and
    interleaved(124), respectively. The ifStackTable is used to
    represent the relationship between the entries.

    Naming Conventions:
              Atuc -- (ATUC) modem at near (Central) end of line
              Atur -- (ATUR) modem at Remote end of line
              Curr -- Current
              Prev -- Previous
              Atn -- Attenuation
              ES  -- Errored Second.
              LCS -- Line Code Specific
              Lof -- Loss of Frame
              Lol -- Loss of Link
              Los -- Loss of Signal
              Lpr -- Loss of Power
              xxxs-- interval of Seconds in which xxx occurs
                      (e.g., xxx=Lof, Los, Lpr)
              Max -- Maximum
              Mgn -- Margin
              Min -- Minimum
              Psd -- Power Spectral Density
              Snr -- Signal to Noise Ratio
              Tx  -- Transmit
              Blks-- Blocks, a data unit, see
                     adslAtuXChanCrcBlockLength
      "
      --  Revision history
      REVISION     "9908190000Z"  -- 19 August 1999, midnight
      DESCRIPTION  "Initial Version, published as RFC 2662"
::= { transmission 94 }

adslLineMib OBJECT IDENTIFIER ::= { adslMIB 1 }

adslMibObjects OBJECT IDENTIFIER ::= { adslLineMib 1 }

-- objects
      adslLineTable   OBJECT-TYPE
          SYNTAX          SEQUENCE OF AdslLineEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "This table includes common attributes describing
              both ends of the line.  It is required for all ADSL
              physical interfaces.  ADSL physical interfaces are
              those ifEntries where ifType is equal to adsl(94)."
      ::= { adslMibObjects 1 }

      adslLineEntry   OBJECT-TYPE
          SYNTAX          AdslLineEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION     "An entry in adslLineTable."
          INDEX           { ifIndex }
      ::= { adslLineTable 1 }

      AdslLineEntry ::=
          SEQUENCE {
          adslLineCoding           AdslLineCodingType,
          adslLineType             INTEGER,
          adslLineSpecific         VariablePointer,
          adslLineConfProfile      SnmpAdminString,
          adslLineAlarmConfProfile SnmpAdminString
          }

      adslLineCoding OBJECT-TYPE
          SYNTAX      AdslLineCodingType
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Specifies the ADSL coding type used on this
              line."
      ::= { adslLineEntry 1 }

     adslLineType OBJECT-TYPE
          SYNTAX      INTEGER {
              noChannel (1),        -- no channels exist
              fastOnly (2),         -- fast channel exists only
              interleavedOnly (3),  -- interleaved channel exists
                                    -- only
              fastOrInterleaved (4),-- either fast or interleaved
                                    -- channels can exist, but
                                    -- only one at any time
              fastAndInterleaved (5)-- both fast or interleaved

                                    -- channels exist
          }
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Defines the type of ADSL physical line
              entity that exists, by defining whether and how
              the line is channelized.  If the line is channelized,
              the value will be other than noChannel(1).  This
              object defines which channel type(s) are supported.

              In the case that the line is channelized, the manager
              can use the ifStackTable to determine the ifIndex for
              the associated channel(s)."
      ::= { adslLineEntry 2 }

      adslLineSpecific OBJECT-TYPE
          SYNTAX      VariablePointer
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "OID instance in vendor-specific MIB. The Instance may
              be used to determine shelf/slot/port of the ATUC
              interface in a DSLAM."
      ::= { adslLineEntry 3 }

     adslLineConfProfile OBJECT-TYPE
          SYNTAX      SnmpAdminString (SIZE (1..32))
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION
              "The value of this object identifies the row
              in the ADSL Line Configuration Profile Table,
              (adslLineConfProfileTable), which applies for this
              ADSL line, and channels if applicable.

              For `dynamic' mode, in the case which the
              configuration profile has not been set, the
              value will be set to `DEFVAL'.

              If the implementator of this MIB has chosen not
              to implement `dynamic assignment' of profiles, this
              object's MIN-ACCESS is read-only."
      ::= { adslLineEntry 4 }

     adslLineAlarmConfProfile OBJECT-TYPE
          SYNTAX      SnmpAdminString (SIZE (1..32))
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION
              "The value of this object identifies the row
              in the ADSL Line Alarm Configuration Profile Table,
              (adslLineAlarmConfProfileTable), which applies to this
              ADSL line, and channels if applicable.

              For `dynamic' mode, in the case which the
              alarm profile has not been set, the
              value will be set to `DEFVAL'.

              If the implementator of this MIB has chosen not
              to implement `dynamic assignment' of profiles, this
              object's MIN-ACCESS is read-only."
      ::= { adslLineEntry 5 }

      adslAtucPhysTable       OBJECT-TYPE
          SYNTAX          SEQUENCE OF AdslAtucPhysEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "This table provides one row for each ATUC.
              Each row contains the Physical Layer Parameters
              table for that ATUC. ADSL physical interfaces are
              those ifEntries where ifType is equal to adsl(94)."
      ::= { adslMibObjects 2 }

      adslAtucPhysEntry       OBJECT-TYPE
          SYNTAX          AdslAtucPhysEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION     "An entry in the adslAtucPhysTable."
          INDEX           { ifIndex }
      ::= { adslAtucPhysTable 1 }

      AdslAtucPhysEntry ::=
          SEQUENCE {
          adslAtucInvSerialNumber         SnmpAdminString,
          adslAtucInvVendorID             SnmpAdminString,
          adslAtucInvVersionNumber        SnmpAdminString,
          adslAtucCurrSnrMgn              INTEGER,
          adslAtucCurrAtn                 Gauge32,
          adslAtucCurrStatus              BITS,
          adslAtucCurrOutputPwr           INTEGER,
          adslAtucCurrAttainableRate      Gauge32
          }

      -- inventory group

      --
      -- These items should describe the lowest level identifiable
      -- component, be it a stand-alone modem, a card in a rack,
      -- a child-board, etc.
      --
      adslAtucInvSerialNumber OBJECT-TYPE
          SYNTAX      SnmpAdminString (SIZE (0..32))
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The vendor specific string that identifies the
              vendor equipment."
      ::= { adslAtucPhysEntry 1 }

      adslAtucInvVendorID OBJECT-TYPE
          SYNTAX      SnmpAdminString (SIZE (0..16))
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The vendor ID code is a copy of the binary
              vendor identification field defined by the
              PHY[10] and expressed as readable characters."
          REFERENCE "ANSI T1.413[10]"
      ::= { adslAtucPhysEntry 2 }

      adslAtucInvVersionNumber OBJECT-TYPE
          SYNTAX      SnmpAdminString (SIZE (0..16))
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The vendor specific version number sent by this ATU
              as part of the initialization messages.  It is a copy
              of the binary version number field defined by the
              PHY[10] and expressed as readable characters."
          REFERENCE "ANSI T1.413[10]"
      ::= { adslAtucPhysEntry 3 }

      -- current status group
      --
      adslAtucCurrSnrMgn OBJECT-TYPE
          SYNTAX      INTEGER (-640..640)
          UNITS       "tenth dB"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Noise Margin as seen by this ATU with respect to its
              received signal in tenth dB."
      ::= { adslAtucPhysEntry 4 }

      adslAtucCurrAtn OBJECT-TYPE
          SYNTAX      Gauge32(0..630)
          UNITS       "tenth dB"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Measured difference in the total power transmitted by
              the peer ATU and the total power received by this ATU."
      ::= { adslAtucPhysEntry 5 }

     adslAtucCurrStatus OBJECT-TYPE
          SYNTAX      BITS {
                            noDefect(0),
                            lossOfFraming(1),
                            lossOfSignal(2),
                            lossOfPower(3),
                            lossOfSignalQuality(4),
                            lossOfLink(5),
                            dataInitFailure(6),
                            configInitFailure(7),
                            protocolInitFailure(8),
                            noPeerAtuPresent(9)
                           }
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Indicates current state of the ATUC line.  This is a
              bit-map of possible conditions.  The various bit
              positions are:

       0      noDefect             There no defects on the line

       1      lossOfFraming        ATUC failure due to not
                                   receiving valid frame.

       2      lossOfSignal         ATUC failure due to not
                                   receiving signal.

       3      lossOfPower          ATUC failure due to loss of
                                   power.
                                   Note: the Agent may still
                                   function.

       4      lossOfSignalQuality  Loss of Signal Quality is
                                   declared when the Noise Margin
                                   falls below the Minimum Noise

                                   Margin, or the bit-error-rate
                                   exceeds 10^-7.

       5      lossOfLink           ATUC failure due to inability
                                   to link with ATUR.

       6      dataInitFailure      ATUC failure during
                                   initialization due to bit
                                   errors corrupting startup
                                   exchange data.

       7      configInitFailure    ATUC failure during
                                   initialization due to peer
                                   ATU not able to support
                                   requested configuration

       8      protocolInitFailure  ATUC failure during
                                   initialization due to
                                   incompatible protocol used by
                                   the peer ATU.

       9      noPeerAtuPresent     ATUC failure during
                                   initialization due to no
                                   activation sequence detected
                                   from peer ATU.

              This is intended to supplement ifOperStatus."
      ::= { adslAtucPhysEntry 6 }

      adslAtucCurrOutputPwr OBJECT-TYPE
          SYNTAX      INTEGER (-310..310)
          UNITS       "tenth dBm"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Measured total output power transmitted by this ATU.
              This is the measurement that was reported during
              the last activation sequence."
      ::= { adslAtucPhysEntry 7 }

      adslAtucCurrAttainableRate OBJECT-TYPE
          SYNTAX      Gauge32
          UNITS       "bps"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Indicates the maximum currently attainable data rate
              by the ATU.  This value will be equal or greater than

              the current line rate."
      ::= { adslAtucPhysEntry 8 }

      adslAturPhysTable        OBJECT-TYPE
          SYNTAX          SEQUENCE OF AdslAturPhysEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "This table provides one row for each ATUR
              Each row contains the Physical Layer Parameters
              table for that ATUR. ADSL physical interfaces are
              those ifEntries where ifType is equal to adsl(94)."
      ::= { adslMibObjects 3 }

      adslAturPhysEntry       OBJECT-TYPE
          SYNTAX          AdslAturPhysEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION     "An entry in the adslAturPhysTable."
          INDEX           { ifIndex }
      ::= { adslAturPhysTable 1 }

      AdslAturPhysEntry ::=
          SEQUENCE {
          adslAturInvSerialNumber         SnmpAdminString,
          adslAturInvVendorID             SnmpAdminString,
          adslAturInvVersionNumber        SnmpAdminString,
          adslAturCurrSnrMgn              INTEGER,
          adslAturCurrAtn                 Gauge32,
          adslAturCurrStatus              BITS,
          adslAturCurrOutputPwr           INTEGER,
          adslAturCurrAttainableRate      Gauge32
          }

      -- inventory group
      --
      adslAturInvSerialNumber OBJECT-TYPE
          SYNTAX      SnmpAdminString (SIZE (0..32))
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The vendor specific string that identifies the
              vendor equipment."
      ::= { adslAturPhysEntry 1 }

      adslAturInvVendorID OBJECT-TYPE
          SYNTAX      SnmpAdminString (SIZE (0..16))
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The vendor ID code is a copy of the binary
              vendor identification field defined by the
              PHY[10] and expressed as readable characters."
          REFERENCE "ANSI T1.413"
      ::= { adslAturPhysEntry 2 }

      adslAturInvVersionNumber OBJECT-TYPE
          SYNTAX      SnmpAdminString (SIZE (0..16))
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The vendor specific version number sent by this ATU
              as part of the initialization messages.  It is a copy
              of the binary version number field defined by the
              PHY[10] and expressed as readable characters."
          REFERENCE "ANSI T1.413"
      ::= { adslAturPhysEntry 3 }

      -- current status group
      --
      adslAturCurrSnrMgn OBJECT-TYPE
          SYNTAX      INTEGER (-640..640)
          UNITS       "tenth dB"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Noise Margin as seen by this ATU with respect to its
              received signal in tenth dB."
      ::= { adslAturPhysEntry 4 }

      adslAturCurrAtn OBJECT-TYPE
          SYNTAX      Gauge32(0..630)
          UNITS       "tenth dB"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Measured difference in the total power transmitted by
              the peer ATU and the total power received by this ATU."
      ::= { adslAturPhysEntry 5 }

     adslAturCurrStatus OBJECT-TYPE
          SYNTAX     BITS {
                           noDefect(0),
                           lossOfFraming(1),
                           lossOfSignal(2),
                           lossOfPower(3),
                           lossOfSignalQuality(4)
                          }
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Indicates current state of the ATUR line.  This is a
              bit-map of possible conditions.  Due to the isolation
              of the ATUR when line problems occur, many state
              conditions like loss of power, loss of quality signal,
              and initialization errors,  can not be determined.
              While trouble shooting ATUR, also use object,
              adslAtucCurrStatus.  The various bit positions are:

       0      noDefect             There no defects on the line

       1      lossOfFraming        ATUR failure due to not
                                   receiving valid frame

       2      lossOfSignal         ATUR failure due to not
                                   receiving signal

       3      lossOfPower          ATUR failure due to loss of
                                   power

       4      lossOfSignalQuality  Loss of Signal Quality is
                                   declared when the Noise Margin
                                   falls below the Minimum Noise
                                   Margin, or the
                                   bit-error-rate exceeds 10^-7.

              This is intended to supplement ifOperStatus."
      ::= { adslAturPhysEntry 6 }

      adslAturCurrOutputPwr OBJECT-TYPE
          SYNTAX      INTEGER (-310..310)
          UNITS       "tenth dBm"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Measured total output power transmitted by this ATU.
              This is the measurement that was reported during
              the last activation sequence."
      ::= { adslAturPhysEntry 7 }

      adslAturCurrAttainableRate OBJECT-TYPE
          SYNTAX      Gauge32
          UNITS       "bps"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Indicates the maximum currently attainable data rate
              by the ATU.  This value will be equal or greater than
              the current line rate."
      ::= { adslAturPhysEntry 8 }

      adslAtucChanTable       OBJECT-TYPE
          SYNTAX          SEQUENCE OF AdslAtucChanEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "This table provides one row for each ATUC channel.
              ADSL channel interfaces are those ifEntries
              where ifType is equal to adslInterleave(124)
              or adslFast(125)."
      ::= { adslMibObjects 4 }

      adslAtucChanEntry       OBJECT-TYPE
          SYNTAX          AdslAtucChanEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION     "An entry in the adslAtucChanTable."
          INDEX           { ifIndex }
      ::= { adslAtucChanTable 1 }

      AdslAtucChanEntry ::=
          SEQUENCE {
          adslAtucChanInterleaveDelay     Gauge32,
          adslAtucChanCurrTxRate          Gauge32,
          adslAtucChanPrevTxRate          Gauge32,
          adslAtucChanCrcBlockLength      Gauge32
          }

      -- current group
      --
      adslAtucChanInterleaveDelay OBJECT-TYPE
          SYNTAX      Gauge32
          UNITS       "milli-seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Interleave Delay for this channel.

              Interleave delay applies only to the
              interleave channel and defines the mapping
              (relative spacing) between subsequent input
              bytes at the interleaver input and their placement

              in the bit stream at the interleaver output.
              Larger numbers provide greater separation between
              consecutive input bytes in the output bit stream
              allowing for improved impulse noise immunity at
              the expense of payload latency.

              In the case where the ifType is Fast(125), use
              noSuchObject."
      ::= { adslAtucChanEntry 1 }

      adslAtucChanCurrTxRate  OBJECT-TYPE
          SYNTAX      Gauge32
          UNITS       "bps"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Actual transmit rate on this channel."
      ::= { adslAtucChanEntry 2 }

      adslAtucChanPrevTxRate OBJECT-TYPE
          SYNTAX      Gauge32
          UNITS        "bps"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The rate at the time of the last
              adslAtucRateChangeTrap event. It is also set at
              initialization to prevent a trap being sent.

              Rate changes less than adslAtucThresh(*)RateDown
              or less than adslAtucThresh(*)RateUp will not
              cause a trap or cause this object to change.
              (*) == Fast or Interleave.
              See AdslLineAlarmConfProfileEntry."
      ::= { adslAtucChanEntry 3 }

      adslAtucChanCrcBlockLength OBJECT-TYPE
          SYNTAX      Gauge32
          UNITS        "byte"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Indicates the length of the channel data-block
              on which the CRC operates.  Refer to Line Code
              Specific MIBs, [11] and [12] for more
              information."
      ::= { adslAtucChanEntry 4 }

     adslAturChanTable       OBJECT-TYPE
          SYNTAX          SEQUENCE OF AdslAturChanEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "This table provides one row for each ATUR channel.
              ADSL channel interfaces are those ifEntries
              where ifType is equal to adslInterleave(124)
              or adslFast(125)."
      ::= { adslMibObjects 5 }

      adslAturChanEntry       OBJECT-TYPE
          SYNTAX          AdslAturChanEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION     "An entry in the adslAturChanTable."
          INDEX           { ifIndex }
      ::= { adslAturChanTable 1 }

      AdslAturChanEntry ::=
          SEQUENCE {
          adslAturChanInterleaveDelay     Gauge32,
          adslAturChanCurrTxRate          Gauge32,
          adslAturChanPrevTxRate          Gauge32,
          adslAturChanCrcBlockLength      Gauge32
          }

      -- current group
      --
      adslAturChanInterleaveDelay OBJECT-TYPE
          SYNTAX      Gauge32
          UNITS       "milli-seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Interleave Delay for this channel.

              Interleave delay applies only to the
              interleave channel and defines the mapping
              (relative spacing) between subsequent input
              bytes at the interleaver input and their placement
              in the bit stream at the interleaver output.
              Larger numbers provide greater separation between
              consecutive input bytes in the output bit stream
              allowing for improved impulse noise immunity at
              the expense of payload latency.

              In the case where the ifType is Fast(125), use

              noSuchObject."
      ::= { adslAturChanEntry 1 }

      adslAturChanCurrTxRate  OBJECT-TYPE
          SYNTAX      Gauge32
          UNITS       "bps"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Actual transmit rate on this channel."
      ::= { adslAturChanEntry 2 }

      adslAturChanPrevTxRate OBJECT-TYPE
          SYNTAX      Gauge32
          UNITS       "bps"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
             "The rate at the time of the last
              adslAturRateChangeTrap event. It is also set at
              initialization to prevent a trap being sent.
              Rate changes less than adslAturThresh(*)RateDown
              or less than adslAturThresh(*)RateUp will not
              cause a trap or cause this object to change.
              (*) == Fast or Interleave.
              See AdslLineAlarmConfProfileEntry."
      ::= { adslAturChanEntry 3 }

      adslAturChanCrcBlockLength OBJECT-TYPE
          SYNTAX      Gauge32
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Indicates the length of the channel data-block
              on which the CRC operates.  Refer to Line Code
              Specific MIBs, [11] and [12] for more
              information."
      ::= { adslAturChanEntry 4 }

      adslAtucPerfDataTable   OBJECT-TYPE
          SYNTAX          SEQUENCE OF AdslAtucPerfDataEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "This table provides one row for each ATUC.
              ADSL physical interfaces are
              those ifEntries where ifType is equal to adsl(94)."
      ::= { adslMibObjects 6 }

      adslAtucPerfDataEntry       OBJECT-TYPE
          SYNTAX          AdslAtucPerfDataEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION     "An entry in adslAtucPerfDataTable."
          INDEX           { ifIndex }
      ::= { adslAtucPerfDataTable 1 }

      AdslAtucPerfDataEntry ::=
          SEQUENCE {
          adslAtucPerfLofs                 Counter32,
          adslAtucPerfLoss                 Counter32,
          adslAtucPerfLols                 Counter32,
          adslAtucPerfLprs                 Counter32,
          adslAtucPerfESs                  Counter32,
          adslAtucPerfInits                Counter32,
          adslAtucPerfValidIntervals       INTEGER,
          adslAtucPerfInvalidIntervals     INTEGER,
          adslAtucPerfCurr15MinTimeElapsed AdslPerfTimeElapsed,
          adslAtucPerfCurr15MinLofs        PerfCurrentCount,
          adslAtucPerfCurr15MinLoss        PerfCurrentCount,
          adslAtucPerfCurr15MinLols        PerfCurrentCount,
          adslAtucPerfCurr15MinLprs        PerfCurrentCount,
          adslAtucPerfCurr15MinESs         PerfCurrentCount,
          adslAtucPerfCurr15MinInits       PerfCurrentCount,
          adslAtucPerfCurr1DayTimeElapsed  AdslPerfTimeElapsed,
          adslAtucPerfCurr1DayLofs         AdslPerfCurrDayCount,
          adslAtucPerfCurr1DayLoss         AdslPerfCurrDayCount,
          adslAtucPerfCurr1DayLols         AdslPerfCurrDayCount,
          adslAtucPerfCurr1DayLprs         AdslPerfCurrDayCount,
          adslAtucPerfCurr1DayESs          AdslPerfCurrDayCount,
          adslAtucPerfCurr1DayInits        AdslPerfCurrDayCount,
          adslAtucPerfPrev1DayMoniSecs     INTEGER,
          adslAtucPerfPrev1DayLofs         AdslPerfPrevDayCount,
          adslAtucPerfPrev1DayLoss         AdslPerfPrevDayCount,
          adslAtucPerfPrev1DayLols         AdslPerfPrevDayCount,
          adslAtucPerfPrev1DayLprs         AdslPerfPrevDayCount,
          adslAtucPerfPrev1DayESs          AdslPerfPrevDayCount,
          adslAtucPerfPrev1DayInits        AdslPerfPrevDayCount
          }

      -- Event Counters
      --
      -- Also see adslAtucIntervalTable for 15 minute interval
      -- elapsed counters.
      --
      adslAtucPerfLofs OBJECT-TYPE
          SYNTAX      Counter32
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the number of Loss of Framing failures since
              agent reset."
      ::= { adslAtucPerfDataEntry 1 }

      adslAtucPerfLoss  OBJECT-TYPE
          SYNTAX      Counter32
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the number of Loss of Signal failures since
              agent reset."
      ::= { adslAtucPerfDataEntry 2 }

      adslAtucPerfLols OBJECT-TYPE
          SYNTAX      Counter32
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the number of Loss of Link failures since
              agent reset."
      ::= { adslAtucPerfDataEntry 3 }

      adslAtucPerfLprs OBJECT-TYPE
          SYNTAX      Counter32
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the number of Loss of Power failures since
              agent reset."
      ::= { adslAtucPerfDataEntry 4 }

      adslAtucPerfESs OBJECT-TYPE
          SYNTAX      Counter32
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the number of Errored Seconds since agent
              reset.  The errored second parameter is a count of
              one-second intervals containing one or more crc
              anomalies, or one or more los or sef defects."
      ::= { adslAtucPerfDataEntry 5 }

      adslAtucPerfInits OBJECT-TYPE
          SYNTAX      Counter32
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the line initialization attempts since
              agent reset. Includes both successful and failed
              attempts."
      ::= { adslAtucPerfDataEntry 6 }

      -- general 15 min interval information
      --

      adslAtucPerfValidIntervals OBJECT-TYPE
          SYNTAX      INTEGER(0..96)
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The number of previous 15-minute intervals in the
              interval table for which data was collected.  Given
              that <n> is the maximum # of intervals supported.
              The value will be <n> unless the measurement was
              (re-)started within the last (<n>*15) minutes, in which
              case the value will be the number of complete 15
              minute intervals for which the agent has at least
              some data. In certain cases (e.g., in the case
              where the agent is a proxy) it is possible that some
              intervals are unavailable.  In this case, this
              interval is the maximum interval number for
              which data is available."
      ::= { adslAtucPerfDataEntry 7 }

      adslAtucPerfInvalidIntervals OBJECT-TYPE
          SYNTAX      INTEGER(0..96)
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The number of intervals in the range from
              0 to the value of adslAtucPerfValidIntervals
              for which no data is available. This object
              will typically be zero except in cases where
              the data for some intervals are not available
              (e.g., in proxy situations)."
      ::= { adslAtucPerfDataEntry 8 }

      -- 15 min current performance group
      --
      adslAtucPerfCurr15MinTimeElapsed OBJECT-TYPE
          SYNTAX      AdslPerfTimeElapsed(0..899)
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Total elapsed seconds in this interval."
      ::= { adslAtucPerfDataEntry 9 }

      adslAtucPerfCurr15MinLofs OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the current 15 minute interval
              when there was Loss of Framing."
      ::= { adslAtucPerfDataEntry 10 }

      adslAtucPerfCurr15MinLoss  OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the current 15 minute interval
              when there was Loss of Signal."
      ::= { adslAtucPerfDataEntry 11 }

      adslAtucPerfCurr15MinLols  OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the current 15 minute interval
              when there was Loss of Link."
      ::= { adslAtucPerfDataEntry 12 }

      adslAtucPerfCurr15MinLprs  OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the current 15 minute interval
              when there was Loss of Power."
      ::= { adslAtucPerfDataEntry 13 }

      adslAtucPerfCurr15MinESs OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of Errored Seconds in the current 15 minute
              interval.  The errored second parameter is a count of
              one-second intervals containing one or more crc
              anomalies, or one or more los or sef defects."
      ::= { adslAtucPerfDataEntry 14 }

      adslAtucPerfCurr15MinInits  OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the line initialization attempts in the
              current 15 minute interval. Includes both successful
              and failed attempts."
      ::= { adslAtucPerfDataEntry 15 }

      -- 1-day current and previous performance group
      --
      adslAtucPerfCurr1DayTimeElapsed OBJECT-TYPE
          SYNTAX      AdslPerfTimeElapsed(0..86399)
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Number of seconds that have elapsed since the
              beginning of the current 1-day interval."
      ::= { adslAtucPerfDataEntry 16 }

      adslAtucPerfCurr1DayLofs  OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the number of seconds when there was Loss of
              Framing during the current day as measured by
              adslAtucPerfCurr1DayTimeElapsed."
      ::= { adslAtucPerfDataEntry 17 }

      adslAtucPerfCurr1DayLoss  OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the number of seconds when there was Loss of
              Signal during the current day as measured by
              adslAtucPerfCurr1DayTimeElapsed."
      ::= { adslAtucPerfDataEntry 18 }

      adslAtucPerfCurr1DayLols  OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the number of seconds when there was Loss of
              Link during the current day as measured by
              adslAtucPerfCurr1DayTimeElapsed."
      ::= { adslAtucPerfDataEntry 19 }

      adslAtucPerfCurr1DayLprs  OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the number of seconds when there was Loss of
              Power during the current day as measured by
              adslAtucPerfCurr1DayTimeElapsed."
      ::= { adslAtucPerfDataEntry 20 }

      adslAtucPerfCurr1DayESs OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of Errored Seconds during the current day as
              measured by adslAtucPerfCurr1DayTimeElapsed.
              The errored second parameter is a count of
              one-second intervals containing one or more crc
              anomalies, or one or more los or sef defects."
      ::= { adslAtucPerfDataEntry 21 }

      adslAtucPerfCurr1DayInits  OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the line initialization attempts in the
              day as measured by adslAtucPerfCurr1DayTimeElapsed.
              Includes both successful and failed attempts."
      ::= { adslAtucPerfDataEntry 22 }

      adslAtucPerfPrev1DayMoniSecs OBJECT-TYPE
          SYNTAX      INTEGER(0..86400)
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The amount of time in the previous 1-day interval
              over which the performance monitoring information
              is actually counted. This value will be the same as
              the interval duration except in a situation where
              performance monitoring data could not be collected
              for any reason."
      ::= { adslAtucPerfDataEntry 23 }

      adslAtucPerfPrev1DayLofs  OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the interval when there was
              Loss of Framing within the most recent previous
              1-day period."
      ::= { adslAtucPerfDataEntry 24 }

      adslAtucPerfPrev1DayLoss  OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the interval when there was
              Loss of Signal within the most recent previous
              1-day period."
      ::= { adslAtucPerfDataEntry 25 }

      adslAtucPerfPrev1DayLols  OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the interval when there was
              Loss of Link within the most recent previous
              1-day period."
      ::= { adslAtucPerfDataEntry 26 }

      adslAtucPerfPrev1DayLprs  OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the interval when there was
              Loss of Power within the most recent previous
              1-day period."
      ::= { adslAtucPerfDataEntry 27 }

      adslAtucPerfPrev1DayESs OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of Errored Seconds within the most recent
              previous 1-day period. The errored second parameter is
              a count of one-second intervals containing one or more
              crc anomalies, or one or more los or sef defects."
      ::= { adslAtucPerfDataEntry 28 }

      adslAtucPerfPrev1DayInits  OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the line initialization attempts in the most
              recent previous 1-day period. Includes both successful
              and failed attempts."
      ::= { adslAtucPerfDataEntry 29 }

      adslAturPerfDataTable   OBJECT-TYPE
          SYNTAX          SEQUENCE OF AdslAturPerfDataEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "This table provides one row for each ATUR.
              ADSL physical interfaces are
              those ifEntries where ifType is equal to adsl(94)."
      ::= { adslMibObjects 7 }

      adslAturPerfDataEntry       OBJECT-TYPE
          SYNTAX          AdslAturPerfDataEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION     "An entry in adslAturPerfDataTable."
          INDEX           { ifIndex }
      ::= { adslAturPerfDataTable 1 }

      AdslAturPerfDataEntry ::=
          SEQUENCE {
          adslAturPerfLofs                 Counter32,
          adslAturPerfLoss                 Counter32,
          adslAturPerfLprs                 Counter32,
          adslAturPerfESs                  Counter32,
          adslAturPerfValidIntervals       INTEGER,
          adslAturPerfInvalidIntervals     INTEGER,
          adslAturPerfCurr15MinTimeElapsed AdslPerfTimeElapsed,
          adslAturPerfCurr15MinLofs        PerfCurrentCount,
          adslAturPerfCurr15MinLoss        PerfCurrentCount,
          adslAturPerfCurr15MinLprs        PerfCurrentCount,
          adslAturPerfCurr15MinESs         PerfCurrentCount,
          adslAturPerfCurr1DayTimeElapsed  AdslPerfTimeElapsed,
          adslAturPerfCurr1DayLofs         AdslPerfCurrDayCount,
          adslAturPerfCurr1DayLoss         AdslPerfCurrDayCount,
          adslAturPerfCurr1DayLprs         AdslPerfCurrDayCount,
          adslAturPerfCurr1DayESs          AdslPerfCurrDayCount,
          adslAturPerfPrev1DayMoniSecs     INTEGER,
          adslAturPerfPrev1DayLofs         AdslPerfPrevDayCount,
          adslAturPerfPrev1DayLoss         AdslPerfPrevDayCount,
          adslAturPerfPrev1DayLprs         AdslPerfPrevDayCount,
          adslAturPerfPrev1DayESs          AdslPerfPrevDayCount
          }

      -- Event (Raw) Counters
      --
      -- Also see adslAturIntervalTable for 15 minute interval
      -- elapsed counters.
      --
      adslAturPerfLofs OBJECT-TYPE
          SYNTAX      Counter32
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the number of Loss of Framing failures since
              agent reset."
      ::= { adslAturPerfDataEntry 1 }

      adslAturPerfLoss  OBJECT-TYPE
          SYNTAX      Counter32
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the number of Loss of Signal failures since
              agent reset."
      ::= { adslAturPerfDataEntry 2 }

     adslAturPerfLprs  OBJECT-TYPE
          SYNTAX      Counter32
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the number of Loss of Power failures since
              agent reset."
      ::= { adslAturPerfDataEntry 3 }

      adslAturPerfESs  OBJECT-TYPE
          SYNTAX      Counter32
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the number of Errored Seconds since agent
              reset.  The errored second parameter is a count of
              one-second intervals containing one or more crc
              anomalies, or one or more los or sef defects."
      ::= { adslAturPerfDataEntry 4 }

      -- general 15 min interval information
      --
      adslAturPerfValidIntervals OBJECT-TYPE
          SYNTAX      INTEGER(0..96)
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The number of previous 15-minute intervals in the
              interval table for which data was collected.  Given
              that <n> is the maximum # of intervals supported.
              The value will be <n> unless the measurement was
              (re-)started within the last (<n>*15) minutes, in which
              case the value will be the number of complete 15
              minute intervals for which the agent has at least
              some data. In certain cases (e.g., in the case
              where the agent is a proxy) it is possible that some
              intervals are unavailable.  In this case, this
              interval is the maximum interval number for
              which data is available."
      ::= { adslAturPerfDataEntry 5 }

      adslAturPerfInvalidIntervals OBJECT-TYPE
          SYNTAX      INTEGER(0..96)
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The number of intervals in the range from
              0 to the value of adslAturPerfValidIntervals
              for which no data is available. This object
              will typically be zero except in cases where
              the data for some intervals are not available
              (e.g., in proxy situations)."
      ::= { adslAturPerfDataEntry 6 }

      -- 15 min current performance group
      --
      adslAturPerfCurr15MinTimeElapsed OBJECT-TYPE
          SYNTAX      AdslPerfTimeElapsed(0..899)
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Total elapsed seconds in this interval."
      ::= { adslAturPerfDataEntry 7 }

      adslAturPerfCurr15MinLofs OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the current 15 minute interval
              when there was Loss of Framing."
      ::= { adslAturPerfDataEntry 8 }

      adslAturPerfCurr15MinLoss  OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the current 15 minute interval
              when there was Loss of Signal."
      ::= { adslAturPerfDataEntry 9 }

      adslAturPerfCurr15MinLprs  OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the current 15 minute interval
              when there was Loss of Power."
      ::= { adslAturPerfDataEntry 10 }

      adslAturPerfCurr15MinESs OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
             "Count of Errored Seconds in the current 15 minute
             interval.  The errored second parameter is a count of
             one-second intervals containing one or more crc
             anomalies, or one or more los or sef defects."
      ::= { adslAturPerfDataEntry 11 }

      -- 1-day current and previous performance group
      --
      adslAturPerfCurr1DayTimeElapsed OBJECT-TYPE
          SYNTAX      AdslPerfTimeElapsed(0..86399)
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Number of seconds that have elapsed since the
              beginning of the current 1-day interval."
      ::= { adslAturPerfDataEntry 12 }

      adslAturPerfCurr1DayLofs  OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the number of seconds when there was Loss
              of Framing during the current day as measured by
              adslAturPerfCurr1DayTimeElapsed."
      ::= { adslAturPerfDataEntry 13 }

      adslAturPerfCurr1DayLoss  OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the number of seconds when there was Loss
              of Signal during the current day as measured by
              adslAturPerfCurr1DayTimeElapsed."
      ::= { adslAturPerfDataEntry 14 }

      adslAturPerfCurr1DayLprs  OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the number of seconds when there was Loss
              of Power during the current day as measured by
              adslAturPerfCurr1DayTimeElapsed."
      ::= { adslAturPerfDataEntry 15 }

 adslAturPerfCurr1DayESs OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of Errored Seconds during the current day as
              measured by adslAturPerfCurr1DayTimeElapsed.
              The errored second parameter is a count of
              one-second intervals containing one or more crc
              anomalies, or one or more los or sef defects."
      ::= { adslAturPerfDataEntry 16 }

      adslAturPerfPrev1DayMoniSecs OBJECT-TYPE
          SYNTAX      INTEGER(0..86400)
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The amount of time in the previous 1-day interval
              over which the performance monitoring information
              is actually counted. This value will be the same as
              the interval duration except in a situation where
              performance monitoring data could not be collected
              for any reason."
      ::= { adslAturPerfDataEntry 17 }

      adslAturPerfPrev1DayLofs  OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the interval when there was
              Loss of Framing within the most recent previous
              1-day period."
      ::= { adslAturPerfDataEntry 18 }

      adslAturPerfPrev1DayLoss  OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the interval when there was
              Loss of Signal within the most recent previous
              1-day period."
      ::= { adslAturPerfDataEntry 19 }

      adslAturPerfPrev1DayLprs  OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the interval when there was
              Loss of Power within the most recent previous
              1-day period."
      ::= { adslAturPerfDataEntry 20 }

      adslAturPerfPrev1DayESs OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of Errored Seconds within the most recent
              previous 1-day period. The errored second parameter is
              a count of one-second intervals containing one or more
              crc anomalies, or one or more los or sef defects."
      ::= { adslAturPerfDataEntry 21 }

      adslAtucIntervalTable   OBJECT-TYPE
          SYNTAX          SEQUENCE OF AdslAtucIntervalEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "This table provides one row for each ATUC
              performance data collection interval.
              ADSL physical interfaces are

              those ifEntries where ifType is equal to adsl(94)."
      ::= { adslMibObjects 8 }

      adslAtucIntervalEntry   OBJECT-TYPE
          SYNTAX          AdslAtucIntervalEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION     "An entry in the adslAtucIntervalTable."
          INDEX           { ifIndex, adslAtucIntervalNumber }
      ::= { adslAtucIntervalTable 1 }

      AdslAtucIntervalEntry ::=
          SEQUENCE {
          adslAtucIntervalNumber          INTEGER,
          adslAtucIntervalLofs            PerfIntervalCount,
          adslAtucIntervalLoss            PerfIntervalCount,
          adslAtucIntervalLols            PerfIntervalCount,
          adslAtucIntervalLprs            PerfIntervalCount,
          adslAtucIntervalESs             PerfIntervalCount,
          adslAtucIntervalInits           PerfIntervalCount,
          adslAtucIntervalValidData       TruthValue
          }

      adslAtucIntervalNumber OBJECT-TYPE
          SYNTAX      INTEGER(1..96)
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION
              "Performance Data Interval number 1 is the
              the most recent previous interval; interval
              96 is 24 hours ago.  Intervals 2..96 are
              optional."
      ::= { adslAtucIntervalEntry 1 }

      adslAtucIntervalLofs OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the interval when there was Loss
              of Framing."
      ::= { adslAtucIntervalEntry 2 }

      adslAtucIntervalLoss  OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the interval when there was Loss
              of Signal."
      ::= { adslAtucIntervalEntry 3 }

      adslAtucIntervalLols  OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the interval when there was Loss
              of Link."
      ::= { adslAtucIntervalEntry 4 }

      adslAtucIntervalLprs  OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the interval when there was Loss
              of Power."
      ::= { adslAtucIntervalEntry 5 }

      adslAtucIntervalESs OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of Errored Seconds in the interval.
              The errored second parameter is a count of
              one-second intervals containing one or more crc
              anomalies, or one or more los or sef defects."
      ::= { adslAtucIntervalEntry 6 }

      adslAtucIntervalInits  OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of the line initialization attempts
              during the interval. Includes both successful
              and failed attempts."
      ::= { adslAtucIntervalEntry 7 }

      adslAtucIntervalValidData OBJECT-TYPE
          SYNTAX TruthValue
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
              "This variable indicates if the data for this
              interval is valid."
      ::= { adslAtucIntervalEntry 8 }

      adslAturIntervalTable   OBJECT-TYPE
          SYNTAX          SEQUENCE OF AdslAturIntervalEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "This table provides one row for each ATUR
              performance data collection interval.
              ADSL physical interfaces are those
              ifEntries where ifType is equal to adsl(94)."
      ::= { adslMibObjects 9 }

      adslAturIntervalEntry   OBJECT-TYPE
          SYNTAX          AdslAturIntervalEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION     "An entry in the adslAturIntervalTable."
          INDEX           { ifIndex, adslAturIntervalNumber }
      ::= { adslAturIntervalTable 1 }

      AdslAturIntervalEntry ::=
          SEQUENCE {
          adslAturIntervalNumber          INTEGER,
          adslAturIntervalLofs            PerfIntervalCount,
          adslAturIntervalLoss            PerfIntervalCount,
          adslAturIntervalLprs            PerfIntervalCount,
          adslAturIntervalESs             PerfIntervalCount,
          adslAturIntervalValidData       TruthValue
          }

      adslAturIntervalNumber OBJECT-TYPE
          SYNTAX      INTEGER(1..96)
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION
              "Performance Data Interval number 1 is the
              the most recent previous interval; interval
              96 is 24 hours ago.  Intervals 2..96 are
              optional."
      ::= { adslAturIntervalEntry 1 }

      adslAturIntervalLofs OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the interval when there was
              Loss of Framing."
      ::= { adslAturIntervalEntry 2 }

      adslAturIntervalLoss  OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the interval when there was
              Loss of Signal."
      ::= { adslAturIntervalEntry 3 }

      adslAturIntervalLprs  OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of seconds in the interval when there was
              Loss of Power."
      ::= { adslAturIntervalEntry 4 }

      adslAturIntervalESs OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of Errored Seconds in the interval.
              The errored second parameter is a count of
              one-second intervals containing one or more crc
              anomalies, or one or more los or sef defects."
      ::= { adslAturIntervalEntry 5 }

      adslAturIntervalValidData OBJECT-TYPE
          SYNTAX TruthValue
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
              "This variable indicates if the data for this

              interval is valid."
      ::= { adslAturIntervalEntry 6 }

      adslAtucChanPerfDataTable       OBJECT-TYPE
          SYNTAX          SEQUENCE OF AdslAtucChanPerfDataEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "This table provides one row for each ATUC channel.
              ADSL channel interfaces are those ifEntries
              where ifType is equal to adslInterleave(124)
              or adslFast(125)."
      ::= { adslMibObjects 10 }

      adslAtucChanPerfDataEntry       OBJECT-TYPE
          SYNTAX          AdslAtucChanPerfDataEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION     "An entry in adslAtucChanPerfDataTable."
          INDEX           { ifIndex }
      ::= { adslAtucChanPerfDataTable 1 }

      AdslAtucChanPerfDataEntry ::=
       SEQUENCE {
       adslAtucChanReceivedBlks                 Counter32,
       adslAtucChanTransmittedBlks              Counter32,
       adslAtucChanCorrectedBlks                Counter32,
       adslAtucChanUncorrectBlks                Counter32,
       adslAtucChanPerfValidIntervals           INTEGER,
       adslAtucChanPerfInvalidIntervals         INTEGER,
       adslAtucChanPerfCurr15MinTimeElapsed     AdslPerfTimeElapsed,
       adslAtucChanPerfCurr15MinReceivedBlks    PerfCurrentCount,
       adslAtucChanPerfCurr15MinTransmittedBlks PerfCurrentCount,
       adslAtucChanPerfCurr15MinCorrectedBlks   PerfCurrentCount,
       adslAtucChanPerfCurr15MinUncorrectBlks   PerfCurrentCount,
       adslAtucChanPerfCurr1DayTimeElapsed      AdslPerfTimeElapsed,
       adslAtucChanPerfCurr1DayReceivedBlks     AdslPerfCurrDayCount,
       adslAtucChanPerfCurr1DayTransmittedBlks  AdslPerfCurrDayCount,
       adslAtucChanPerfCurr1DayCorrectedBlks    AdslPerfCurrDayCount,
       adslAtucChanPerfCurr1DayUncorrectBlks    AdslPerfCurrDayCount,
       adslAtucChanPerfPrev1DayMoniSecs         INTEGER,
       adslAtucChanPerfPrev1DayReceivedBlks     AdslPerfPrevDayCount,
       adslAtucChanPerfPrev1DayTransmittedBlks  AdslPerfPrevDayCount,
       adslAtucChanPerfPrev1DayCorrectedBlks    AdslPerfPrevDayCount,
       adslAtucChanPerfPrev1DayUncorrectBlks    AdslPerfPrevDayCount
      }
      -- performance group

      --
      -- Note: block is intended to be the length of the channel
      --       data-block on which the CRC operates. See
      --       adslAtucChanCrcBlockLength for more information.
      --
      adslAtucChanReceivedBlks OBJECT-TYPE
          SYNTAX      Counter32
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks received on this channel
              since agent reset."
      ::= { adslAtucChanPerfDataEntry 1 }

      adslAtucChanTransmittedBlks  OBJECT-TYPE
          SYNTAX      Counter32
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks transmitted on this
              channel since agent reset."
      ::= { adslAtucChanPerfDataEntry 2 }

      adslAtucChanCorrectedBlks  OBJECT-TYPE
          SYNTAX      Counter32
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with errors that were
              corrected since agent reset.  These blocks are passed
              on as good data."
      ::= { adslAtucChanPerfDataEntry 3 }

      adslAtucChanUncorrectBlks  OBJECT-TYPE
          SYNTAX      Counter32
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with uncorrectable
              errors since agent reset."
      ::= { adslAtucChanPerfDataEntry 4 }

      -- general 15 min interval information
      --
      adslAtucChanPerfValidIntervals OBJECT-TYPE
          SYNTAX      INTEGER(0..96)
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The number of previous 15-minute intervals in the
              interval table for which data was collected.  Given
              that <n> is the maximum # of intervals supported.
              The value will be <n> unless the measurement was
              (re-)started within the last (<n>*15) minutes, in which
              case the value will be the number of complete 15
              minute intervals for which the agent has at least
              some data. In certain cases (e.g., in the case
              where the agent is a proxy) it is possible that some
              intervals are unavailable.  In this case, this
              interval is the maximum interval number for
              which data is available."
      ::= { adslAtucChanPerfDataEntry 5 }

      adslAtucChanPerfInvalidIntervals OBJECT-TYPE
          SYNTAX      INTEGER(0..96)
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The number of intervals in the range from
              0 to the value of adslAtucChanPerfValidIntervals
              for which no data is available. This object
              will typically be zero except in cases where
              the data for some intervals are not available
              (e.g., in proxy situations)."
      ::= { adslAtucChanPerfDataEntry 6 }

      -- 15 min current performance group
      --
      adslAtucChanPerfCurr15MinTimeElapsed OBJECT-TYPE
          SYNTAX      AdslPerfTimeElapsed(0..899)
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Total elapsed seconds in this interval."
      ::= { adslAtucChanPerfDataEntry 7 }

      adslAtucChanPerfCurr15MinReceivedBlks OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks received on this channel
              within the current 15 minute interval."
      ::= { adslAtucChanPerfDataEntry 8 }

      adslAtucChanPerfCurr15MinTransmittedBlks OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks transmitted on this
              channel within the current 15 minute interval."
      ::= { adslAtucChanPerfDataEntry 9 }

      adslAtucChanPerfCurr15MinCorrectedBlks  OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with errors that were
              corrected on this channel within the current 15 minute
              interval."
      ::= { adslAtucChanPerfDataEntry 10 }

      adslAtucChanPerfCurr15MinUncorrectBlks  OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with uncorrectable
              errors on this channel within the current 15 minute
              interval."
      ::= { adslAtucChanPerfDataEntry 11 }

      -- 1-day current and previous performance group
      --
      adslAtucChanPerfCurr1DayTimeElapsed OBJECT-TYPE
          SYNTAX      AdslPerfTimeElapsed(0..86399)
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Number of seconds that have elapsed since the
              beginning of the current 1-day interval."
      ::= { adslAtucChanPerfDataEntry 12 }

      adslAtucChanPerfCurr1DayReceivedBlks  OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks received on this
              channel during the current day as measured by

              adslAtucChanPerfCurr1DayTimeElapsed."
      ::= { adslAtucChanPerfDataEntry 13 }

      adslAtucChanPerfCurr1DayTransmittedBlks  OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks transmitted on this
              channel during the current day as measured by
              adslAtucChanPerfCurr1DayTimeElapsed."
      ::= { adslAtucChanPerfDataEntry 14 }

      adslAtucChanPerfCurr1DayCorrectedBlks  OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with errors that were
              corrected on this channel during the current day as
              measured by adslAtucChanPerfCurr1DayTimeElapsed."
      ::= { adslAtucChanPerfDataEntry 15 }

      adslAtucChanPerfCurr1DayUncorrectBlks  OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with uncorrectable
              errors on this channel during the current day as
              measured by adslAtucChanPerfCurr1DayTimeElapsed."
      ::= { adslAtucChanPerfDataEntry 16 }

      adslAtucChanPerfPrev1DayMoniSecs OBJECT-TYPE
          SYNTAX      INTEGER(0..86400)
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The amount of time in the previous 1-day interval
              over which the performance monitoring information
              is actually counted. This value will be the same as
              the interval duration except in a situation where
              performance monitoring data could not be collected
              for any reason."
      ::= { adslAtucChanPerfDataEntry 17 }

      adslAtucChanPerfPrev1DayReceivedBlks  OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks received on this
              channel within the most recent previous 1-day
              period."
      ::= { adslAtucChanPerfDataEntry 18 }

      adslAtucChanPerfPrev1DayTransmittedBlks  OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks transmitted on this
              channel within the most recent previous 1-day
              period."
      ::= { adslAtucChanPerfDataEntry 19 }

      adslAtucChanPerfPrev1DayCorrectedBlks  OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with errors that were
              corrected on this channel within the most recent
              previous 1-day period."
      ::= { adslAtucChanPerfDataEntry 20 }

      adslAtucChanPerfPrev1DayUncorrectBlks  OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with uncorrectable
              errors on this channel within the most recent previous
              1-day period."
      ::= { adslAtucChanPerfDataEntry 21 }

      adslAturChanPerfDataTable       OBJECT-TYPE
          SYNTAX          SEQUENCE OF AdslAturChanPerfDataEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "This table provides one row for each ATUR channel.
              ADSL channel interfaces are those ifEntries
              where ifType is equal to adslInterleave(124)
              or adslFast(125)."
      ::= { adslMibObjects 11 }

      adslAturChanPerfDataEntry       OBJECT-TYPE
          SYNTAX          AdslAturChanPerfDataEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION     "An entry in adslAturChanPerfDataTable."
          INDEX           { ifIndex }
      ::= { adslAturChanPerfDataTable 1 }

      AdslAturChanPerfDataEntry ::=
       SEQUENCE {
       adslAturChanReceivedBlks                 Counter32,
       adslAturChanTransmittedBlks              Counter32,
       adslAturChanCorrectedBlks                Counter32,
       adslAturChanUncorrectBlks                Counter32,
       adslAturChanPerfValidIntervals           INTEGER,
       adslAturChanPerfInvalidIntervals         INTEGER,
       adslAturChanPerfCurr15MinTimeElapsed     AdslPerfTimeElapsed,
       adslAturChanPerfCurr15MinReceivedBlks    PerfCurrentCount,
       adslAturChanPerfCurr15MinTransmittedBlks PerfCurrentCount,
       adslAturChanPerfCurr15MinCorrectedBlks   PerfCurrentCount,
       adslAturChanPerfCurr15MinUncorrectBlks   PerfCurrentCount,
       adslAturChanPerfCurr1DayTimeElapsed      AdslPerfTimeElapsed,
       adslAturChanPerfCurr1DayReceivedBlks     AdslPerfCurrDayCount,
       adslAturChanPerfCurr1DayTransmittedBlks  AdslPerfCurrDayCount,
       adslAturChanPerfCurr1DayCorrectedBlks    AdslPerfCurrDayCount,
       adslAturChanPerfCurr1DayUncorrectBlks    AdslPerfCurrDayCount,
       adslAturChanPerfPrev1DayMoniSecs         INTEGER,
       adslAturChanPerfPrev1DayReceivedBlks     AdslPerfPrevDayCount,
       adslAturChanPerfPrev1DayTransmittedBlks  AdslPerfPrevDayCount,
       adslAturChanPerfPrev1DayCorrectedBlks    AdslPerfPrevDayCount,
       adslAturChanPerfPrev1DayUncorrectBlks    AdslPerfPrevDayCount
       }
      -- performance group
      --
      -- Note: block is intended to be the length of the channel
      --       data-block on which the CRC operates. See
      --       adslAturChanCrcBlockLength for more information.
      --
      adslAturChanReceivedBlks OBJECT-TYPE
          SYNTAX      Counter32
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks received on this channel
              since agent reset."
      ::= { adslAturChanPerfDataEntry 1 }

      adslAturChanTransmittedBlks  OBJECT-TYPE
          SYNTAX      Counter32
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks transmitted on this
              channel since agent reset."
      ::= { adslAturChanPerfDataEntry 2 }

      adslAturChanCorrectedBlks  OBJECT-TYPE
          SYNTAX      Counter32
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with errors that were
              corrected since agent reset.  These blocks are passed
              on as good data."
      ::= { adslAturChanPerfDataEntry 3 }

      adslAturChanUncorrectBlks  OBJECT-TYPE
          SYNTAX      Counter32
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with uncorrectable
              errors since agent reset."
      ::= { adslAturChanPerfDataEntry 4 }

      -- general 15 min interval information
      --
      adslAturChanPerfValidIntervals OBJECT-TYPE
          SYNTAX      INTEGER(0..96)
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The number of previous 15-minute intervals in the
              interval table for which data was collected.  Given
              that <n> is the maximum # of intervals supported.
              The value will be <n> unless the measurement was
              (re-)started within the last (<n>*15) minutes, in which
              case the value will be the number of complete 15
              minute intervals for which the agent has at least
              some data. In certain cases (e.g., in the case
              where the agent is a proxy) it is possible that some
              intervals are unavailable.  In this case, this
              interval is the maximum interval number for
              which data is available."
      ::= { adslAturChanPerfDataEntry 5 }

      adslAturChanPerfInvalidIntervals OBJECT-TYPE
          SYNTAX      INTEGER(0..96)
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The number of intervals in the range from
              0 to the value of adslAturChanPerfValidIntervals
              for which no data is available. This object
              will typically be zero except in cases where
              the data for some intervals are not available
              (e.g., in proxy situations)."
      ::= { adslAturChanPerfDataEntry 6 }

      -- 15 min current performance group
      --
      adslAturChanPerfCurr15MinTimeElapsed OBJECT-TYPE
          SYNTAX      AdslPerfTimeElapsed(0..899)
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Total elapsed seconds in this interval.
              A full interval is 900 seconds."
      ::= { adslAturChanPerfDataEntry 7 }

      adslAturChanPerfCurr15MinReceivedBlks OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks received on this
              channel within the current 15 minute interval."
      ::= { adslAturChanPerfDataEntry 8 }

      adslAturChanPerfCurr15MinTransmittedBlks OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks transmitted on this
              channel within the current 15 minute interval."
      ::= { adslAturChanPerfDataEntry 9 }

      adslAturChanPerfCurr15MinCorrectedBlks  OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with errors that were
              corrected on this channel within the current 15 minute
              interval."
      ::= { adslAturChanPerfDataEntry 10 }

      adslAturChanPerfCurr15MinUncorrectBlks  OBJECT-TYPE
          SYNTAX      PerfCurrentCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with uncorrectable
              errors on this channel within the current 15 minute
              interval."
      ::= { adslAturChanPerfDataEntry 11 }

      -- 1-day current and previous performance group
      --
      adslAturChanPerfCurr1DayTimeElapsed OBJECT-TYPE
          SYNTAX      AdslPerfTimeElapsed(0..86399)
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Number of seconds that have elapsed since the
              beginning of the current 1-day interval."
      ::= { adslAturChanPerfDataEntry 12 }

      adslAturChanPerfCurr1DayReceivedBlks  OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks received on this
              channel during the current day as measured by
              adslAturChanPerfCurr1DayTimeElapsed."
      ::= { adslAturChanPerfDataEntry 13 }

      adslAturChanPerfCurr1DayTransmittedBlks  OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks transmitted on this
              channel during the current day as measured by
              adslAturChanPerfCurr1DayTimeElapsed."
      ::= { adslAturChanPerfDataEntry 14 }

      adslAturChanPerfCurr1DayCorrectedBlks  OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with errors that were
              corrected on this channel during the current day as
              measured by adslAturChanPerfCurr1DayTimeElapsed."
      ::= { adslAturChanPerfDataEntry 15 }

      adslAturChanPerfCurr1DayUncorrectBlks  OBJECT-TYPE
          SYNTAX      AdslPerfCurrDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with uncorrectable
              errors on this channel during the current day as
              measured by adslAturChanPerfCurr1DayTimeElapsed."
      ::= { adslAturChanPerfDataEntry 16 }

      adslAturChanPerfPrev1DayMoniSecs OBJECT-TYPE
          SYNTAX      INTEGER(0..86400)
          UNITS       "seconds"
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "The amount of time in the previous 1-day interval
              over which the performance monitoring information
              is actually counted. This value will be the same as
              the interval duration except in a situation where
              performance monitoring data could not be collected
              for any reason."
      ::= { adslAturChanPerfDataEntry 17 }

      adslAturChanPerfPrev1DayReceivedBlks  OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks received on this
              channel within the most recent previous 1-day
              period."
      ::= { adslAturChanPerfDataEntry 18 }

      adslAturChanPerfPrev1DayTransmittedBlks  OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks transmitted on this
              channel within the most recent previous 1-day
              period."
      ::= { adslAturChanPerfDataEntry 19 }

      adslAturChanPerfPrev1DayCorrectedBlks  OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with errors that were
              corrected on this channel within the most recent
              previous 1-day period."
      ::= { adslAturChanPerfDataEntry 20 }

      adslAturChanPerfPrev1DayUncorrectBlks  OBJECT-TYPE
          SYNTAX      AdslPerfPrevDayCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with uncorrectable
              errors on this channel within the most recent previous
              1-day period."
      ::= { adslAturChanPerfDataEntry 21 }

      adslAtucChanIntervalTable   OBJECT-TYPE
          SYNTAX          SEQUENCE OF AdslAtucChanIntervalEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "This table provides one row for each ATUC channel's
              performance data collection interval.
              ADSL channel interfaces are those ifEntries
              where ifType is equal to adslInterleave(124)
              or adslFast(125)."
      ::= { adslMibObjects 12 }

      adslAtucChanIntervalEntry   OBJECT-TYPE
          SYNTAX          AdslAtucChanIntervalEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION     "An entry in the adslAtucIntervalTable."
          INDEX           { ifIndex, adslAtucChanIntervalNumber }
      ::= { adslAtucChanIntervalTable 1 }

      AdslAtucChanIntervalEntry ::=
          SEQUENCE {

          adslAtucChanIntervalNumber          INTEGER,
          adslAtucChanIntervalReceivedBlks    PerfIntervalCount,
          adslAtucChanIntervalTransmittedBlks PerfIntervalCount,
          adslAtucChanIntervalCorrectedBlks   PerfIntervalCount,
          adslAtucChanIntervalUncorrectBlks   PerfIntervalCount,
          adslAtucChanIntervalValidData       TruthValue
          }
      adslAtucChanIntervalNumber OBJECT-TYPE
          SYNTAX      INTEGER(1..96)
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION
              "Performance Data Interval number 1 is the
              the most recent previous interval; interval
              96 is 24 hours ago.  Intervals 2..96 are
              optional."
      ::= { adslAtucChanIntervalEntry 1 }

      adslAtucChanIntervalReceivedBlks OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks received on this channel
              during this interval."
      ::= { adslAtucChanIntervalEntry 2 }

      adslAtucChanIntervalTransmittedBlks  OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks transmitted on this
              channel during this interval."
      ::= { adslAtucChanIntervalEntry 3 }

      adslAtucChanIntervalCorrectedBlks  OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with errors that were
              corrected on this channel during this interval."
      ::= { adslAtucChanIntervalEntry 4 }

      adslAtucChanIntervalUncorrectBlks  OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with uncorrectable
              errors on this channel during this interval."
      ::= { adslAtucChanIntervalEntry 5 }

      adslAtucChanIntervalValidData OBJECT-TYPE
          SYNTAX TruthValue
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
              "This variable indicates if the data for this
              interval is valid."
      ::= { adslAtucChanIntervalEntry 6 }

      adslAturChanIntervalTable   OBJECT-TYPE
          SYNTAX          SEQUENCE OF AdslAturChanIntervalEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "This table provides one row for each ATUR channel's
              performance data collection interval.
              ADSL channel interfaces are those ifEntries
              where ifType is equal to adslInterleave(124)
              or adslFast(125)."
      ::= { adslMibObjects 13 }

      adslAturChanIntervalEntry   OBJECT-TYPE
          SYNTAX          AdslAturChanIntervalEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION     "An entry in the adslAturIntervalTable."
          INDEX           { ifIndex, adslAturChanIntervalNumber }
      ::= { adslAturChanIntervalTable 1 }

      AdslAturChanIntervalEntry ::=
          SEQUENCE {
          adslAturChanIntervalNumber               INTEGER,
          adslAturChanIntervalReceivedBlks         PerfIntervalCount,
          adslAturChanIntervalTransmittedBlks      PerfIntervalCount,
          adslAturChanIntervalCorrectedBlks        PerfIntervalCount,
          adslAturChanIntervalUncorrectBlks        PerfIntervalCount,
          adslAturChanIntervalValidData            TruthValue
          }
      adslAturChanIntervalNumber OBJECT-TYPE
          SYNTAX      INTEGER(1..96)
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION
              "Performance Data Interval number 1 is the
              the most recent previous interval; interval
              96 is 24 hours ago.  Intervals 2..96 are
              optional."
      ::= { adslAturChanIntervalEntry 1 }

      adslAturChanIntervalReceivedBlks OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks received on this channel
              during this interval."
      ::= { adslAturChanIntervalEntry 2 }

      adslAturChanIntervalTransmittedBlks  OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all encoded blocks transmitted on this
              channel during this interval."
      ::= { adslAturChanIntervalEntry 3 }

      adslAturChanIntervalCorrectedBlks  OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with errors that were
              corrected on this channel during this interval."
      ::= { adslAturChanIntervalEntry 4 }

      adslAturChanIntervalUncorrectBlks  OBJECT-TYPE
          SYNTAX      PerfIntervalCount
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
              "Count of all blocks received with uncorrectable
              errors on this channel during this interval."
      ::= { adslAturChanIntervalEntry 5 }

      adslAturChanIntervalValidData OBJECT-TYPE
          SYNTAX TruthValue
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
              "This variable indicates if the data for this
              interval is valid."
      ::= { adslAturChanIntervalEntry 6 }

      -- Profile Group
      --

      adslLineConfProfileTable    OBJECT-TYPE
          SYNTAX          SEQUENCE OF AdslLineConfProfileEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "This table contains information on the ADSL line
              configuration.  One entry in this table reflects a
              profile defined by a manager which can be used to
              configure the ADSL line."
      ::= { adslMibObjects 14}

      adslLineConfProfileEntry    OBJECT-TYPE
          SYNTAX          AdslLineConfProfileEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "Each entry consists of a list of parameters that
              represents the configuration of an ADSL modem.

              When `dynamic' profiles are implemented, a default
              profile will always exist.  This profile's name will
              be set to `DEFVAL' and its parameters will be set
              to vendor specific values, unless otherwise specified
              in this document.

              When `static' profiles are implemented, profiles
              are automaticly created or destroyed as ADSL
              physical lines are discovered and removed by
              the system.  The name of the profile will be
              equivalent to the decimal value of the line's
              interface index.
              "
          INDEX { IMPLIED adslLineConfProfileName}
      ::= { adslLineConfProfileTable 1}

      AdslLineConfProfileEntry ::=
          SEQUENCE {
          adslLineConfProfileName               SnmpAdminString,
          adslAtucConfRateMode                  INTEGER,
          adslAtucConfRateChanRatio             INTEGER,
          adslAtucConfTargetSnrMgn              INTEGER,
          adslAtucConfMaxSnrMgn                 INTEGER,
          adslAtucConfMinSnrMgn                 INTEGER,
          adslAtucConfDownshiftSnrMgn           INTEGER,
          adslAtucConfUpshiftSnrMgn             INTEGER,
          adslAtucConfMinUpshiftTime            INTEGER,
          adslAtucConfMinDownshiftTime          INTEGER,
          adslAtucChanConfFastMinTxRate         Unsigned32,
          adslAtucChanConfInterleaveMinTxRate   Unsigned32,
          adslAtucChanConfFastMaxTxRate         Unsigned32,
          adslAtucChanConfInterleaveMaxTxRate   Unsigned32,
          adslAtucChanConfMaxInterleaveDelay    INTEGER,
          adslAturConfRateMode                  INTEGER,
          adslAturConfRateChanRatio             INTEGER,
          adslAturConfTargetSnrMgn              INTEGER,
          adslAturConfMaxSnrMgn                 INTEGER,
          adslAturConfMinSnrMgn                 INTEGER,
          adslAturConfDownshiftSnrMgn           INTEGER,
          adslAturConfUpshiftSnrMgn             INTEGER,
          adslAturConfMinUpshiftTime            INTEGER,
          adslAturConfMinDownshiftTime          INTEGER,
          adslAturChanConfFastMinTxRate         Unsigned32,
          adslAturChanConfInterleaveMinTxRate   Unsigned32,
          adslAturChanConfFastMaxTxRate         Unsigned32,
          adslAturChanConfInterleaveMaxTxRate   Unsigned32,
          adslAturChanConfMaxInterleaveDelay    INTEGER,
          adslLineConfProfileRowStatus          RowStatus
      }

      adslLineConfProfileName    OBJECT-TYPE
              SYNTAX          SnmpAdminString (SIZE (1..32))
              MAX-ACCESS      not-accessible
              STATUS          current
              DESCRIPTION
              "This object is used by the line configuration table
              in order to identify a row of this table.

              When `dynamic' profiles are implemented, the profile
              name is user specified.  Also, the system will always
              provide a default profile whose name is `DEFVAL'.

              When `static' profiles are implemented, there is an
              one-to-one relationship between each line and its
              profile.  In which case, the profile name will
              need to algorithmicly represent the Line's ifIndex.
              Therefore, the profile's name is a decimalized string
              of the ifIndex that is fixed-length (i.e., 10) with
              leading zero(s).  For example, the profile name for
              ifIndex which equals '15' will be '0000000015'."
      ::= { adslLineConfProfileEntry 1 }

      adslAtucConfRateMode OBJECT-TYPE
          SYNTAX      INTEGER {
              fixed (1),              -- no rate adaptation
              adaptAtStartup (2),     -- perform rate adaptation
                                      -- only at initialization
              adaptAtRuntime (3)      -- perform rate adaptation at
                                      -- any time
          }
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Defines what form of transmit rate adaptation is
              configured on this modem.  See ADSL Forum TR-005 [3]
              for more information."
      ::= { adslLineConfProfileEntry 2 }

      adslAtucConfRateChanRatio OBJECT-TYPE
          SYNTAX      INTEGER(0..100)
          UNITS        "%"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured allocation ratio of excess transmit
              bandwidth between fast and interleaved channels.  Only
              applies when two channel mode and RADSL are supported.
              Distribute bandwidth on each channel in excess of the
              corresponding ChanConfMinTxRate so that:
              adslAtucConfRateChanRatio =

                      [Fast / (Fast + Interleaved)] * 100

              In other words this value is the fast channel
              percentage."
      ::= { adslLineConfProfileEntry 3 }

    adslAtucConfTargetSnrMgn OBJECT-TYPE
          SYNTAX      INTEGER (0..310)
          UNITS       "tenth dB"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Target Signal/Noise Margin.
              This is the Noise Margin the modem must achieve
              with a BER of 10-7 or better to successfully complete
              initialization."
      ::= { adslLineConfProfileEntry 4 }

    adslAtucConfMaxSnrMgn OBJECT-TYPE
          SYNTAX      INTEGER (0..310)
          UNITS       "tenth dB"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Maximum acceptable Signal/Noise Margin.
              If the Noise Margin is above this the modem should
              attempt to reduce its power output to optimize its
              operation."
      ::= { adslLineConfProfileEntry 5 }

      adslAtucConfMinSnrMgn  OBJECT-TYPE
          SYNTAX      INTEGER (0..310)
          UNITS       "tenth dB"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Minimum acceptable Signal/Noise Margin.
              If the noise margin falls below this level, the modem
              should attempt to increase its power output.  If that
              is not possible the modem will attempt to
              re-initialize or shut down."
      ::= { adslLineConfProfileEntry 6 }

      adslAtucConfDownshiftSnrMgn  OBJECT-TYPE
          SYNTAX      INTEGER (0..310)
          UNITS       "tenth dB"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Signal/Noise Margin for rate downshift.
              If the noise margin falls below this level, the modem
              should attempt to decrease its transmit rate.  In
              the case that RADSL mode is not present,
              the value will be `0'."
      ::= { adslLineConfProfileEntry 7 }

      adslAtucConfUpshiftSnrMgn  OBJECT-TYPE
          SYNTAX      INTEGER (0..310)
          UNITS       "tenth dB"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Signal/Noise Margin for rate upshift.
              If the noise margin rises above this level, the modem
              should attempt to increase its transmit rate.    In
              the case that RADSL is not present, the value will

              be `0'."
      ::= { adslLineConfProfileEntry 8 }

      adslAtucConfMinUpshiftTime OBJECT-TYPE
          SYNTAX      INTEGER(0..16383)
          UNITS       "seconds"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Minimum time that the current margin is above
              UpshiftSnrMgn before an upshift occurs.
              In the case that RADSL is not present, the value will
              be `0'."
      ::= { adslLineConfProfileEntry 9 }
     adslAtucConfMinDownshiftTime OBJECT-TYPE
          SYNTAX      INTEGER(0..16383)
          UNITS       "seconds"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Minimum time that the current margin is below
              DownshiftSnrMgn before a downshift occurs.
              In the case that RADSL mode is not present,
              the value will be `0'."
      ::= { adslLineConfProfileEntry 10 }

      adslAtucChanConfFastMinTxRate  OBJECT-TYPE
          SYNTAX      Unsigned32
          UNITS       "bps"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Minimum Transmit rate for `Fast' channels,
              in bps.  See adslAtucConfRateChanRatio for information
              regarding RADSL mode and ATUR transmit rate for
              ATUC receive rates."
      ::= { adslLineConfProfileEntry 11 }

      adslAtucChanConfInterleaveMinTxRate OBJECT-TYPE
          SYNTAX      Unsigned32
          UNITS       "bps"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Minimum Transmit rate for `Interleave'
              channels, in bps.  See adslAtucConfRateChanRatio for
              information regarding RADSL mode and see
              ATUR transmit rate for receive rates."
      ::= { adslLineConfProfileEntry 12 }

      adslAtucChanConfFastMaxTxRate  OBJECT-TYPE
          SYNTAX      Unsigned32
          UNITS       "bps"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Maximum Transmit rate for `Fast' channels,
              in bps.  See adslAtucConfRateChanRatio for information
              regarding RADSL mode and see ATUR transmit rate for
              ATUC receive rates."
      ::= { adslLineConfProfileEntry 13 }

      adslAtucChanConfInterleaveMaxTxRate OBJECT-TYPE
          SYNTAX      Unsigned32
          UNITS       "bps"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Maximum Transmit rate for `Interleave'
              channels, in bps.  See adslAtucConfRateChanRatio for
              information regarding RADSL mode and ATUR transmit
              rate for ATUC receive rates."
      ::= { adslLineConfProfileEntry 14 }

      adslAtucChanConfMaxInterleaveDelay OBJECT-TYPE
          SYNTAX      INTEGER(0..255)
          UNITS        "milli-seconds"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured maximum Interleave Delay for this channel.

              Interleave delay applies only to the interleave channel
              and defines the mapping (relative spacing) between
              subsequent input bytes at the interleaver input and
              their placement in the bit stream at the interleaver
              output.  Larger numbers provide greater separation
              between consecutive input bytes in the output bit
              stream allowing for improved impulse noise immunity
              at the expense of payload latency."
      ::= { adslLineConfProfileEntry 15 }

      adslAturConfRateMode OBJECT-TYPE
          SYNTAX      INTEGER {
              fixed (1),              -- no rate adaptation
              adaptAtStartup (2),     -- perform rate adaptation

                                      -- only at initialization
              adaptAtRuntime (3)      -- perform rate adaptation at
                                      -- any time
          }
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Defines what form of transmit rate adaptation is
              configured on this modem.  See ADSL Forum TR-005 [3]
              for more information."
      ::= { adslLineConfProfileEntry 16 }

      adslAturConfRateChanRatio OBJECT-TYPE
          SYNTAX      INTEGER(0..100)
          UNITS        "%"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured allocation ratio of excess transmit
              bandwidth between fast and interleaved channels.  Only
              applies when two channel mode and RADSL are supported.
              Distribute bandwidth on each channel in excess of the
              corresponding ChanConfMinTxRate so that:
              adslAturConfRateChanRatio =

                      [Fast / (Fast + Interleaved)] * 100

              In other words this value is the fast channel
              percentage."
      ::= { adslLineConfProfileEntry 17 }

    adslAturConfTargetSnrMgn OBJECT-TYPE
          SYNTAX      INTEGER (0..310)
          UNITS       "tenth dB"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Target Signal/Noise Margin.
              This is the Noise Margin the modem must achieve
              with a BER of 10-7 or better to successfully complete
              initialization."
      ::= { adslLineConfProfileEntry 18 }

    adslAturConfMaxSnrMgn OBJECT-TYPE
          SYNTAX      INTEGER (0..310)
          UNITS       "tenth dB"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Maximum acceptable Signal/Noise Margin.
              If the Noise Margin is above this the modem should
              attempt to reduce its power output to optimize its
              operation."
      ::= { adslLineConfProfileEntry 19 }

     adslAturConfMinSnrMgn  OBJECT-TYPE
          SYNTAX      INTEGER (0..310)
          UNITS       "tenth dB"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Minimum acceptable Signal/Noise Margin.
              If the noise margin falls below this level, the modem
              should attempt to increase its power output.  If that
              is not possible the modem will attempt to
              re-initialize or shut down."
      ::= { adslLineConfProfileEntry 20 }

      adslAturConfDownshiftSnrMgn  OBJECT-TYPE
          SYNTAX      INTEGER (0..310)
          UNITS       "tenth dB"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Signal/Noise Margin for rate downshift.
              If the noise margin falls below this level, the modem
              should attempt to decrease its transmit rate.
              In the case that RADSL mode is not present,
              the value will be `0'."
      ::= { adslLineConfProfileEntry 21 }

      adslAturConfUpshiftSnrMgn  OBJECT-TYPE
          SYNTAX      INTEGER (0..310)
          UNITS       "tenth dB"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Signal/Noise Margin for rate upshift.
              If the noise margin rises above this level, the modem
              should attempt to increase its transmit rate.
              In the case that RADSL is not present,
              the value will be `0'."
      ::= { adslLineConfProfileEntry 22 }

      adslAturConfMinUpshiftTime OBJECT-TYPE
          SYNTAX      INTEGER(0..16383)
          UNITS       "seconds"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Minimum time that the current margin is above
              UpshiftSnrMgn before an upshift occurs.
              In the case that RADSL is not present, the value will
              be `0'."
      ::= { adslLineConfProfileEntry 23 }

     adslAturConfMinDownshiftTime OBJECT-TYPE
          SYNTAX      INTEGER(0..16383)
          UNITS       "seconds"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Minimum time that the current margin is below
              DownshiftSnrMgn before a downshift occurs.
              In the case that RADSL mode is not present,
              the value will be `0'."
      ::= { adslLineConfProfileEntry 24 }

      adslAturChanConfFastMinTxRate  OBJECT-TYPE
          SYNTAX      Unsigned32
          UNITS       "bps"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Minimum Transmit rate for `Fast' channels,
              in bps.  See adslAturConfRateChanRatio for information
              regarding RADSL mode and ATUC transmit rate
              for ATUR receive rates."
      ::= { adslLineConfProfileEntry 25 }

      adslAturChanConfInterleaveMinTxRate OBJECT-TYPE
          SYNTAX      Unsigned32
          UNITS       "bps"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Minimum Transmit rate for `Interleave'
              channels, in bps.  See adslAturConfRateChanRatio for
              information regarding RADSL mode and ATUC transmit rate
              for ATUR receive rates."
      ::= { adslLineConfProfileEntry 26 }

      adslAturChanConfFastMaxTxRate  OBJECT-TYPE
          SYNTAX      Unsigned32
          UNITS       "bps"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Maximum Transmit rate for `Fast' channels,
              in bps.  See adslAturConfRateChanRatio for information
              regarding RADSL mode and ATUC transmit rate
              for ATUR receive rates."
      ::= { adslLineConfProfileEntry 27 }

      adslAturChanConfInterleaveMaxTxRate OBJECT-TYPE
          SYNTAX      Unsigned32
          UNITS       "bps"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured Maximum Transmit rate for `Interleave'
              channels, in bps.  See adslAturConfRateChanRatio for
              information regarding RADSL mode and see
              ATUC transmit rate for ATUR receive rates."
      ::= { adslLineConfProfileEntry 28 }

      adslAturChanConfMaxInterleaveDelay OBJECT-TYPE
          SYNTAX      INTEGER(0..255)
          UNITS        "milli-seconds"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Configured maximum Interleave Delay for this channel.

              Interleave delay applies only to the interleave channel
              and defines the mapping (relative spacing) between
              subsequent input bytes at the interleaver input and
              their placement in the bit stream at the interleaver
              output.  Larger numbers provide greater separation
              between consecutive input bytes in the output bit
              stream allowing for improved impulse noise immunity
              at the expense of payload latency."
      ::= { adslLineConfProfileEntry 29 }

      adslLineConfProfileRowStatus OBJECT-TYPE
          SYNTAX          RowStatus
          MAX-ACCESS      read-create
          STATUS          current
          DESCRIPTION
              "This object is used to create a new row or modify or
              delete an existing row in this table.

              A profile activated by setting this object to
              `active'.  When `active' is set, the system
              will validate the profile.

              Before a profile can be deleted or taken out of
              service, (by setting this object to `destroy' or
              `outOfService') it must be first unreferenced
              from all associated lines.

              If the implementator of this MIB has chosen not
              to implement `dynamic assignment' of profiles, this
              object's MIN-ACCESS is read-only and its value
              is always to be `active'."
      ::= { adslLineConfProfileEntry 30 }

      adslLineAlarmConfProfileTable    OBJECT-TYPE
          SYNTAX          SEQUENCE OF AdslLineAlarmConfProfileEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "This table contains information on the ADSL line
              configuration.  One entry in this table reflects a
              profile defined by a manager which can be used to
              configure the modem for a physical line"
      ::= { adslMibObjects 15}

      adslLineAlarmConfProfileEntry    OBJECT-TYPE
          SYNTAX          AdslLineAlarmConfProfileEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "Each entry consists of a list of parameters that
              represents the configuration of an ADSL modem.

              When `dynamic' profiles are implemented, a default
              profile will always exist.  This profile's name will
              be set to `DEFVAL' and its parameters will be set to
              vendor specific values, unless otherwise specified
              in this document.

              When `static' profiles are implemented, profiles
              are automaticly created or destroyed as ADSL
              physical lines are discovered and removed by
              the system.  The name of the profile will be
              equivalent to the decimal value of the line's
              interface index.
              "
          INDEX { IMPLIED adslLineAlarmConfProfileName}
      ::= { adslLineAlarmConfProfileTable 1}

      AdslLineAlarmConfProfileEntry ::=
          SEQUENCE {
          adslLineAlarmConfProfileName          SnmpAdminString,
          adslAtucThresh15MinLofs               INTEGER,
          adslAtucThresh15MinLoss               INTEGER,
          adslAtucThresh15MinLols               INTEGER,
          adslAtucThresh15MinLprs               INTEGER,
          adslAtucThresh15MinESs                INTEGER,
          adslAtucThreshFastRateUp              Unsigned32,
          adslAtucThreshInterleaveRateUp        Unsigned32,
          adslAtucThreshFastRateDown            Unsigned32,
          adslAtucThreshInterleaveRateDown      Unsigned32,
          adslAtucInitFailureTrapEnable         INTEGER,
          adslAturThresh15MinLofs               INTEGER,
          adslAturThresh15MinLoss               INTEGER,
          adslAturThresh15MinLprs               INTEGER,
          adslAturThresh15MinESs                INTEGER,
          adslAturThreshFastRateUp              Unsigned32,
          adslAturThreshInterleaveRateUp        Unsigned32,
          adslAturThreshFastRateDown            Unsigned32,
          adslAturThreshInterleaveRateDown      Unsigned32,
          adslLineAlarmConfProfileRowStatus     RowStatus
          }

      adslLineAlarmConfProfileName    OBJECT-TYPE
          SYNTAX          SnmpAdminString (SIZE (1..32))
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
              "This object is used by the line alarm configuration
              table in order to identify a row of this table.

              When `dynamic' profiles are implemented, the profile
              name is user specified.  Also, the system will always
              provide a default profile whose name is `DEFVAL'.

              When `static' profiles are implemented, there is an
              one-to-one relationship between each line and its
              profile.  In which case, the profile name will
              need to algorithmicly represent the Line's ifIndex.
              Therefore, the profile's name is a decimalized string
              of the ifIndex that is fixed-length (i.e., 10) with
              leading zero(s).  For example, the profile name for
              ifIndex which equals '15' will be '0000000015'."
      ::= { adslLineAlarmConfProfileEntry 1}

      adslAtucThresh15MinLofs OBJECT-TYPE
          SYNTAX      INTEGER(0..900)
          UNITS       "seconds"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "The number of Loss of Frame Seconds
              encountered by an ADSL interface within any given 15
              minutes performance data collection period, which
              causes the SNMP agent to send an
              adslAtucPerfLofsThreshTrap.
              One trap will be sent per interval per interface.
              A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 2}

      adslAtucThresh15MinLoss  OBJECT-TYPE
          SYNTAX      INTEGER(0..900)
          UNITS       "seconds"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "The number of Loss of Signal Seconds
              encountered by an ADSL interface within any given 15
              minutes performance data collection period, which
              causes the SNMP agent to send an
              adslAtucPerfLossThreshTrap.
              One trap will be sent per interval per interface.
              A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 3}

      adslAtucThresh15MinLols  OBJECT-TYPE
          SYNTAX      INTEGER(0..900)
          UNITS       "seconds"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "The number of Loss of Link Seconds
              encountered by an ADSL interface within any given 15
              minutes performance data collection period, which
              causes the SNMP agent to send an
              adslAtucPerfLolsThreshTrap.
              One trap will be sent per interval per interface.
              A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 4}

      adslAtucThresh15MinLprs  OBJECT-TYPE
          SYNTAX      INTEGER(0..900)
          UNITS       "seconds"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "The number of Loss of Power Seconds
              encountered by an ADSL interface within any given 15
              minutes performance data collection period, which
              causes the SNMP agent to send an
              adslAtucPerfLprsThreshTrap.
              One trap will be sent per interval per interface.
              A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 5}

      adslAtucThresh15MinESs  OBJECT-TYPE
          SYNTAX      INTEGER(0..900)
          UNITS       "seconds"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "The number of Errored Seconds
              encountered by an ADSL interface within any given 15
              minutes performance data collection period, which
              causes the SNMP agent to send an
              adslAtucPerfESsThreshTrap.
              One trap will be sent per interval per interface.
              A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 6}

      adslAtucThreshFastRateUp OBJECT-TYPE
          SYNTAX      Unsigned32
          UNITS       "bps"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Applies to `Fast' channels only.
              Configured change in rate causing an
              adslAtucRateChangeTrap. A trap is produced when:
              ChanCurrTxRate >= ChanPrevTxRate plus the value of
              this object. A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 7}

      adslAtucThreshInterleaveRateUp OBJECT-TYPE
          SYNTAX      Unsigned32
          UNITS       "bps"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Applies to `Interleave' channels only.
              Configured change in rate causing an

              adslAtucRateChangeTrap.  A trap is produced when:
              ChanCurrTxRate >= ChanPrevTxRate plus the value of
              this object. A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 8}

      adslAtucThreshFastRateDown OBJECT-TYPE
          SYNTAX      Unsigned32
          UNITS       "bps"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Applies to `Fast' channels only.
              Configured change in rate causing an
              adslAtucRateChangeTrap.  A trap is produced when:
              ChanCurrTxRate <= ChanPrevTxRate minus the value of
              this object. A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 9 }

      adslAtucThreshInterleaveRateDown OBJECT-TYPE
          SYNTAX      Unsigned32
          UNITS       "bps"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Applies to `Interleave' channels only.
              Configured change in rate causing an
              adslAtucRateChangeTrap.  A trap is produced when:
              ChanCurrTxRate <= ChanPrevTxRate minus the value of
              this object. A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 10 }

      adslAtucInitFailureTrapEnable OBJECT-TYPE
          SYNTAX      INTEGER {
              enable (1),
              disable (2)
          }
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Enables and disables the InitFailureTrap.  This
              object is defaulted disable(2)."
      DEFVAL { disable }
      ::= { adslLineAlarmConfProfileEntry 11 }

      adslAturThresh15MinLofs OBJECT-TYPE
          SYNTAX      INTEGER(0..900)
          UNITS       "seconds"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "The number of Loss of Frame Seconds
              encountered by an ADSL interface within any given 15
              minutes performance data collection period, which
              causes the SNMP agent to send an
              adslAturPerfLofsThreshTrap.
              One trap will be sent per interval per interface.
              A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 12 }

      adslAturThresh15MinLoss  OBJECT-TYPE
          SYNTAX      INTEGER(0..900)
          UNITS       "seconds"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "The number of Loss of Signal Seconds
              encountered by an ADSL interface within any given 15
              minutes performance data collection period, which
              causes the SNMP agent to send an
              adslAturPerfLossThreshTrap.
              One trap will be sent per interval per interface.
              A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 13 }

      adslAturThresh15MinLprs  OBJECT-TYPE
          SYNTAX      INTEGER(0..900)
          UNITS       "seconds"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "The number of Loss of Power Seconds
              encountered by an ADSL interface within any given 15
              minutes performance data collection period, which
              causes the SNMP agent to send an
              adslAturPerfLprsThreshTrap.
              One trap will be sent per interval per interface.
              A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 14 }

      adslAturThresh15MinESs  OBJECT-TYPE
          SYNTAX      INTEGER(0..900)
          UNITS       "seconds"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "The number of Errored Seconds

              encountered by an ADSL interface within any given 15
              minutes performance data collection period, which
              causes the SNMP agent to send an
              adslAturPerfESsThreshTrap.
              One trap will be sent per interval per interface.
              A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 15 }

      adslAturThreshFastRateUp OBJECT-TYPE
          SYNTAX      Unsigned32
          UNITS       "bps"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Applies to `Fast' channels only.
              Configured change in rate causing an
              adslAturRateChangeTrap.  A trap is produced when:
              ChanCurrTxRate >= ChanPrevTxRate plus the value of
              this object. A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 16 }

      adslAturThreshInterleaveRateUp OBJECT-TYPE
          SYNTAX      Unsigned32
          UNITS       "bps"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Applies to `Interleave' channels only.
              configured change in rate causing an
              adslAturRateChangeTrap.  A trap is produced when:
              ChanCurrTxRate >= ChanPrevTxRate plus the value of
              this object. A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 17 }

      adslAturThreshFastRateDown OBJECT-TYPE
          SYNTAX      Unsigned32
          UNITS       "bps"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Applies to `Fast' channels only.
              Configured change in rate causing an
              adslAturRateChangeTrap.  A trap is produced when:
              ChanCurrTxRate <= ChanPrevTxRate minus the value of
              this object. A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 18 }

      adslAturThreshInterleaveRateDown OBJECT-TYPE
          SYNTAX      Unsigned32
          UNITS       "bps"
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION
              "Applies to `Interleave' channels only.
              Configured change in rate causing an
              adslAturRateChangeTrap.  A trap is produced when:
              ChanCurrTxRate <= ChanPrevTxRate minus the value of
              this object. A value of `0' will disable the trap."
      ::= { adslLineAlarmConfProfileEntry 19 }

      adslLineAlarmConfProfileRowStatus OBJECT-TYPE
          SYNTAX          RowStatus
          MAX-ACCESS      read-create
          STATUS          current
          DESCRIPTION
              "This object is used to create a new row or modify or
              delete an existing row in this table.

              A profile activated by setting this object to
              `active'.  When `active' is set, the system
              will validate the profile.

              Before a profile can be deleted or taken out of
              service, (by setting this object to `destroy' or
              `outOfService') it must be first unreferenced
              from all associated lines.

              If the implementator of this MIB has chosen not
              to implement `dynamic assignment' of profiles, this
              object's MIN-ACCESS is read-only and its value
              is always to be `active'."
      ::= { adslLineAlarmConfProfileEntry 20 }

      -- Line Code Specific Tables

      -- These are place holders for the Line Code Specific MIBs
      -- once they become available.

      adslLCSMib  OBJECT IDENTIFIER ::= { adslMibObjects 16 }

-- trap definitions

adslTraps OBJECT IDENTIFIER ::= { adslLineMib 2 }

adslAtucTraps OBJECT IDENTIFIER ::= { adslTraps 1 }

      adslAtucPerfLofsThreshTrap      NOTIFICATION-TYPE
          OBJECTS { adslAtucPerfCurr15MinLofs,
                    adslAtucThresh15MinLofs }
          STATUS  current
          DESCRIPTION
              "Loss of Framing 15-minute interval threshold reached."
      ::= { adslAtucTraps 0 1 }

      adslAtucPerfLossThreshTrap      NOTIFICATION-TYPE
          OBJECTS { adslAtucPerfCurr15MinLoss,
                    adslAtucThresh15MinLoss }
          STATUS  current
          DESCRIPTION
              "Loss of Signal 15-minute interval threshold reached."
      ::= { adslAtucTraps 0 2 }

      adslAtucPerfLprsThreshTrap      NOTIFICATION-TYPE
          OBJECTS { adslAtucPerfCurr15MinLprs,
                    adslAtucThresh15MinLprs }
          STATUS  current
          DESCRIPTION
              "Loss of Power 15-minute interval threshold reached."
      ::= { adslAtucTraps 0 3 }

      adslAtucPerfESsThreshTrap       NOTIFICATION-TYPE
          OBJECTS { adslAtucPerfCurr15MinESs,
                    adslAtucThresh15MinESs }
          STATUS  current
          DESCRIPTION
              "Errored Second 15-minute interval threshold reached."
      ::= { adslAtucTraps 0 4 }

      adslAtucRateChangeTrap  NOTIFICATION-TYPE
          OBJECTS { adslAtucChanCurrTxRate,
                    adslAtucChanPrevTxRate }
          STATUS  current
          DESCRIPTION
              "The ATUCs transmit rate has changed (RADSL mode only)"
      ::= { adslAtucTraps 0 5 }

      adslAtucPerfLolsThreshTrap      NOTIFICATION-TYPE
          OBJECTS { adslAtucPerfCurr15MinLols,
                    adslAtucThresh15MinLols }
          STATUS  current
          DESCRIPTION
              "Loss of Link 15-minute interval threshold reached."
      ::= { adslAtucTraps 0 6 }

      adslAtucInitFailureTrap NOTIFICATION-TYPE
          OBJECTS { adslAtucCurrStatus }
          STATUS  current
          DESCRIPTION
              "ATUC initialization failed. See adslAtucCurrStatus
              for potential reasons."
      ::= { adslAtucTraps 0 7 }

adslAturTraps OBJECT IDENTIFIER ::= { adslTraps 2 }

      adslAturPerfLofsThreshTrap      NOTIFICATION-TYPE
          OBJECTS { adslAturPerfCurr15MinLofs,
                    adslAturThresh15MinLofs }
          STATUS  current
          DESCRIPTION
              "Loss of Framing 15-minute interval threshold reached."
      ::= { adslAturTraps 0 1 }

      adslAturPerfLossThreshTrap      NOTIFICATION-TYPE
          OBJECTS { adslAturPerfCurr15MinLoss,
                    adslAturThresh15MinLoss }
          STATUS  current
          DESCRIPTION
              "Loss of Signal 15-minute interval threshold reached."
      ::= { adslAturTraps 0 2 }

      adslAturPerfLprsThreshTrap      NOTIFICATION-TYPE
          OBJECTS { adslAturPerfCurr15MinLprs,
                    adslAturThresh15MinLprs }
          STATUS  current
          DESCRIPTION
              "Loss of Power 15-minute interval threshold reached."
      ::= { adslAturTraps 0 3 }

      adslAturPerfESsThreshTrap       NOTIFICATION-TYPE
          OBJECTS { adslAturPerfCurr15MinESs,
                    adslAturThresh15MinESs }
          STATUS  current
          DESCRIPTION
              "Errored Second 15-minute interval threshold reached."
      ::= { adslAturTraps 0 4 }

      adslAturRateChangeTrap  NOTIFICATION-TYPE
          OBJECTS { adslAturChanCurrTxRate,
                    adslAturChanPrevTxRate }
          STATUS  current
          DESCRIPTION
              "The ATURs transmit rate has changed (RADSL mode only)"
      ::= { adslAturTraps 0 5 }

      -- no adslAturPerfLolsThreshTrap possible { 0 6 }

      -- no adslAturInitFailureTrap possible { 0 7 }

-- conformance information

adslConformance OBJECT IDENTIFIER ::= { adslLineMib 3 }

adslGroups OBJECT IDENTIFIER ::= { adslConformance 1 }
adslCompliances OBJECT IDENTIFIER ::= { adslConformance 2 }

      -- ATU-C agent compliance statements

      adslLineMibAtucCompliance MODULE-COMPLIANCE
          STATUS  current
          DESCRIPTION
              "The compliance statement for SNMP entities
               which manage ADSL ATU-C interfaces."

          MODULE  -- this module
          MANDATORY-GROUPS
             {
             adslLineGroup, adslPhysicalGroup, adslChannelGroup,
             adslAtucPhysPerfIntervalGroup,
             adslAturPhysPerfIntervalGroup, adslLineConfProfileGroup,
             adslLineAlarmConfProfileGroup,
             adslLineConfProfileControlGroup
             }

          GROUP       adslAtucPhysPerfRawCounterGroup
          DESCRIPTION
              "This group is optional.  Implementations which
               require continuous ATU-C physical event counters
               should implement this group."

          GROUP       adslAturPhysPerfRawCounterGroup
          DESCRIPTION
              "This group is optional.  Implementations which
               require continuous ATU-R physical event counters
               should implement this group."

          GROUP       adslAtucChanPerformanceGroup
          DESCRIPTION
              "This group is optional.  Implementations which
               require ATU-C channel block event counters should
               implement this group."

          GROUP       adslAturChanPerformanceGroup
          DESCRIPTION
              "This group is optional.  Implementations which
               require ATU-R channel block event counters should
               implement this group."

          OBJECT      adslLineConfProfile
          MIN-ACCESS  read-only
          DESCRIPTION
              "Read-only access is applicable when static
               profiles are implemented."

          OBJECT      adslAtucConfRateMode
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucConfRateChanRatio
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucConfTargetSnrMgn
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucConfMaxSnrMgn
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucConfMinSnrMgn
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucConfDownshiftSnrMgn
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucConfUpshiftSnrMgn
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucConfMinUpshiftTime
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucConfMinDownshiftTime
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucChanConfFastMinTxRate
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucChanConfInterleaveMinTxRate
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucChanConfFastMaxTxRate
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucChanConfInterleaveMaxTxRate
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucChanConfMaxInterleaveDelay
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturConfRateMode
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturConfRateChanRatio
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturConfTargetSnrMgn
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturConfMaxSnrMgn
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturConfMinSnrMgn
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturConfDownshiftSnrMgn
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturConfUpshiftSnrMgn
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturConfMinUpshiftTime
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturConfMinDownshiftTime
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturChanConfFastMinTxRate
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturChanConfInterleaveMinTxRate
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturChanConfFastMaxTxRate
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturChanConfInterleaveMaxTxRate
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturChanConfMaxInterleaveDelay
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslLineConfProfileRowStatus
          MIN-ACCESS  read-only
          DESCRIPTION
              "Read-only access is applicable only when static
               profiles are implemented."

          OBJECT      adslLineAlarmConfProfile
          MIN-ACCESS  read-only
          DESCRIPTION
              "Read-only access is applicable only when static
               profiles are implemented."

          OBJECT      adslAtucThresh15MinLofs
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucThresh15MinLoss
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucThresh15MinLols
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucThresh15MinLprs
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucThresh15MinESs
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucThreshFastRateUp
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucThreshInterleaveRateUp
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucThreshFastRateDown
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucThreshInterleaveRateDown
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucInitFailureTrapEnable
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturThresh15MinLofs
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturThresh15MinLoss
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturThresh15MinLprs
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturThresh15MinESs
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturThreshFastRateUp
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturThreshInterleaveRateUp
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturThreshFastRateDown
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturThreshInterleaveRateDown
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslLineAlarmConfProfileRowStatus
          MIN-ACCESS  read-only
          DESCRIPTION
              "Read-only access is applicable only when static
               profiles are implemented."
      ::= { adslCompliances 1 }

      -- ATU-R agent compliance statements

      adslLineMibAturCompliance MODULE-COMPLIANCE
          STATUS  current
          DESCRIPTION
              "The compliance statement for SNMP entities
               which manage ADSL ATU-R interfaces."

          MODULE  -- this module
          MANDATORY-GROUPS
              {
              adslAturLineGroup, adslAturPhysicalGroup,
              adslAturChannelGroup,
              adslAturAtucPhysPerfIntervalGroup,
              adslAturAturPhysPerfIntervalGroup,
              adslAturLineAlarmConfProfileGroup,
              adslAturLineConfProfileControlGroup
              }

          GROUP       adslAturAtucPhysPerfRawCounterGroup
          DESCRIPTION
              "This group is optional.  Implementations which
               require continuous ATU-C physical event counters
               should implement this group."

          GROUP       adslAturAturPhysPerfRawCounterGroup
          DESCRIPTION
              "This group is optional.  Implementations which

               require continuous ATU-R physical event counters
               should implement this group."

          GROUP       adslAturAtucChanPerformanceGroup
          DESCRIPTION
              "This group is optional.  Implementations which
               require ATU-C channel block event counters should
               implement this group."

          GROUP       adslAturAturChanPerformanceGroup
          DESCRIPTION
              "This group is optional.  Implementations which
               require ATU-R channel block event counters should
               implement this group."

          OBJECT      adslLineAlarmConfProfile
          MIN-ACCESS  read-only
          DESCRIPTION
              "Read-only access is applicable only when static
               profiles are implemented."

          OBJECT      adslAtucThresh15MinLofs
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucThresh15MinLoss
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucThresh15MinESs
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucThreshFastRateUp
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucThreshInterleaveRateUp
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucThreshFastRateDown
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAtucInitFailureTrapEnable
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturThresh15MinLofs
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturThresh15MinLoss
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturThresh15MinLprs
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturThresh15MinESs
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturThreshFastRateUp
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturThreshInterleaveRateUp
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturThreshFastRateDown
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslAturThreshInterleaveRateDown
          MIN-ACCESS  read-write
          DESCRIPTION
              "Read-write access is applicable when
               static profiles are implemented."

          OBJECT      adslLineAlarmConfProfileRowStatus
          MIN-ACCESS  read-only
          DESCRIPTION
              "Read-only access is applicable only when static
               profiles are implemented."

          OBJECT     adslAtucCurrStatus
          SYNTAX   BITS {
                         noDefect(0),
                         lossOfFraming(1),
                         lossOfSignal(2)
                        }
          DESCRIPTION
              "It is allowable to implement only noDefect(0),
              lossOfFraming(1) and lossOfSignal(2) by the ATU-R
              agent."
     ::= { adslCompliances 2 }

      -- units of conformance
      adslLineGroup    OBJECT-GROUP
          OBJECTS {
             adslLineCoding, adslLineType, adslLineSpecific
             }
          STATUS     current
          DESCRIPTION
              "A collection of objects providing configuration
              information about an ADSL Line."
      ::= { adslGroups 1 }

      adslPhysicalGroup    OBJECT-GROUP
          OBJECTS {

             adslAtucInvSerialNumber, adslAtucInvVendorID,
             adslAtucInvVersionNumber, adslAtucCurrSnrMgn,
             adslAtucCurrAtn, adslAtucCurrStatus,
             adslAtucCurrOutputPwr, adslAtucCurrAttainableRate,
             adslAturInvSerialNumber, adslAturInvVendorID,
             adslAturInvVersionNumber, adslAturCurrSnrMgn,
             adslAturCurrAtn, adslAturCurrStatus,
             adslAturCurrOutputPwr, adslAturCurrAttainableRate
             }
          STATUS     current
          DESCRIPTION
              "A collection of objects providing physical
              configuration information of the ADSL Line."
      ::= { adslGroups 2 }

      adslChannelGroup    OBJECT-GROUP
          OBJECTS {
             adslAtucChanInterleaveDelay, adslAtucChanCurrTxRate,
             adslAtucChanPrevTxRate, adslAtucChanCrcBlockLength,
             adslAturChanInterleaveDelay, adslAturChanCurrTxRate,
             adslAturChanPrevTxRate, adslAturChanCrcBlockLength
             }
          STATUS     current
          DESCRIPTION
              "A collection of objects providing configuration
              information about an ADSL channel."
      ::= { adslGroups 3 }

      adslAtucPhysPerfRawCounterGroup OBJECT-GROUP
          OBJECTS {
             adslAtucPerfLofs, adslAtucPerfLoss,
             adslAtucPerfLols, adslAtucPerfLprs,
             adslAtucPerfESs, adslAtucPerfInits
             }
          STATUS     current
          DESCRIPTION
              "A collection of objects providing raw performance
              counts on an ADSL Line (ATU-C end)."
      ::= { adslGroups 4 }

      adslAtucPhysPerfIntervalGroup OBJECT-GROUP
          OBJECTS {
             adslAtucPerfValidIntervals,
             adslAtucPerfInvalidIntervals,
             adslAtucPerfCurr15MinTimeElapsed,
             adslAtucPerfCurr15MinLofs, adslAtucPerfCurr15MinLoss,
             adslAtucPerfCurr15MinLols, adslAtucPerfCurr15MinLprs,
             adslAtucPerfCurr15MinESs, adslAtucPerfCurr15MinInits,
             adslAtucPerfCurr1DayLofs, adslAtucPerfCurr1DayLoss,
             adslAtucPerfCurr1DayLols, adslAtucPerfCurr1DayLprs,
             adslAtucPerfCurr1DayESs, adslAtucPerfCurr1DayInits,
             adslAtucPerfPrev1DayMoniSecs,
             adslAtucPerfPrev1DayLofs, adslAtucPerfPrev1DayLoss,
             adslAtucPerfPrev1DayLols, adslAtucPerfPrev1DayLprs,
             adslAtucPerfPrev1DayESs, adslAtucPerfPrev1DayInits,
             adslAtucIntervalLofs, adslAtucIntervalLoss,
             adslAtucIntervalLols, adslAtucIntervalLprs,
             adslAtucIntervalESs, adslAtucIntervalInits,
             adslAtucIntervalValidData
             }
          STATUS     current
          DESCRIPTION
              "A collection of objects providing current 15-minute,
              1-day; and previous 1-day performance counts on
              ADSL Line (ATU-C end) ."
      ::= { adslGroups 5 }

      adslAturPhysPerfRawCounterGroup OBJECT-GROUP
          OBJECTS {
             adslAturPerfLofs, adslAturPerfLoss,
             adslAturPerfLprs, adslAturPerfESs
             }
          STATUS     current
          DESCRIPTION
              "A collection of objects providing raw performance
              counts on an ADSL Line (ATU-R end)."
      ::= { adslGroups 6 }

      adslAturPhysPerfIntervalGroup OBJECT-GROUP
          OBJECTS {
             adslAturPerfValidIntervals,
             adslAturPerfInvalidIntervals,
             adslAturPerfCurr15MinTimeElapsed,
             adslAturPerfCurr15MinLofs, adslAturPerfCurr15MinLoss,
             adslAturPerfCurr15MinLprs, adslAturPerfCurr15MinESs,
             adslAturPerfCurr1DayTimeElapsed,
             adslAturPerfCurr1DayLofs, adslAturPerfCurr1DayLoss,
             adslAturPerfCurr1DayLprs, adslAturPerfCurr1DayESs,
             adslAturPerfPrev1DayMoniSecs,
             adslAturPerfPrev1DayLofs, adslAturPerfPrev1DayLoss,
             adslAturPerfPrev1DayLprs, adslAturPerfPrev1DayESs,
             adslAturIntervalLofs,
             adslAturIntervalLoss, adslAturIntervalLprs,
             adslAturIntervalESs, adslAturIntervalValidData
             }
          STATUS     current
          DESCRIPTION
              "A collection of objects providing current 15-minute,
              1-day; and previous 1-day performance counts on
              ADSL Line (ATU-R end)."
      ::= { adslGroups 7 }

      adslAtucChanPerformanceGroup OBJECT-GROUP
          OBJECTS {
             adslAtucChanReceivedBlks,
             adslAtucChanTransmittedBlks,
             adslAtucChanCorrectedBlks,
             adslAtucChanUncorrectBlks,
             adslAtucChanPerfValidIntervals,
             adslAtucChanPerfInvalidIntervals,
             adslAtucChanPerfCurr15MinTimeElapsed,
             adslAtucChanPerfCurr15MinReceivedBlks,
             adslAtucChanPerfCurr15MinTransmittedBlks,
             adslAtucChanPerfCurr15MinCorrectedBlks,
             adslAtucChanPerfCurr15MinUncorrectBlks,
             adslAtucChanPerfCurr1DayTimeElapsed,
             adslAtucChanPerfCurr1DayReceivedBlks,
             adslAtucChanPerfCurr1DayTransmittedBlks,
             adslAtucChanPerfCurr1DayCorrectedBlks,
             adslAtucChanPerfCurr1DayUncorrectBlks,
             adslAtucChanPerfPrev1DayMoniSecs,
             adslAtucChanPerfPrev1DayReceivedBlks,
             adslAtucChanPerfPrev1DayTransmittedBlks,
             adslAtucChanPerfPrev1DayCorrectedBlks,
             adslAtucChanPerfPrev1DayUncorrectBlks,
             adslAtucChanIntervalReceivedBlks,
             adslAtucChanIntervalTransmittedBlks,
             adslAtucChanIntervalCorrectedBlks,
             adslAtucChanIntervalUncorrectBlks,
             adslAtucChanIntervalValidData
             }
          STATUS     current
          DESCRIPTION
              "A collection of objects providing channel block
              performance information on an ADSL channel
              (ATU-C end)."
      ::= { adslGroups 8 }

      adslAturChanPerformanceGroup OBJECT-GROUP
          OBJECTS {
             adslAturChanReceivedBlks,
             adslAturChanTransmittedBlks,
             adslAturChanCorrectedBlks,
             adslAturChanUncorrectBlks,
             adslAturChanPerfValidIntervals,
             adslAturChanPerfInvalidIntervals,
             adslAturChanPerfCurr15MinTimeElapsed,
             adslAturChanPerfCurr15MinReceivedBlks,
             adslAturChanPerfCurr15MinTransmittedBlks,
             adslAturChanPerfCurr15MinCorrectedBlks,
             adslAturChanPerfCurr15MinUncorrectBlks,
             adslAturChanPerfCurr1DayTimeElapsed,
             adslAturChanPerfCurr1DayReceivedBlks,
             adslAturChanPerfCurr1DayTransmittedBlks,
             adslAturChanPerfCurr1DayCorrectedBlks,
             adslAturChanPerfCurr1DayUncorrectBlks,
             adslAturChanPerfPrev1DayMoniSecs,
             adslAturChanPerfPrev1DayReceivedBlks,
             adslAturChanPerfPrev1DayTransmittedBlks,
             adslAturChanPerfPrev1DayCorrectedBlks,
             adslAturChanPerfPrev1DayUncorrectBlks,
             adslAturChanIntervalReceivedBlks,
             adslAturChanIntervalTransmittedBlks,
             adslAturChanIntervalCorrectedBlks,
             adslAturChanIntervalUncorrectBlks,
             adslAturChanIntervalValidData
             }
          STATUS     current
          DESCRIPTION
              "A collection of objects providing channel block
              performance information on an ADSL channel
              (ATU-C end)."
      ::= { adslGroups 9 }

      adslLineConfProfileGroup OBJECT-GROUP
          OBJECTS {
             adslAtucConfRateMode, adslAtucConfRateChanRatio,
             adslAtucConfTargetSnrMgn, adslAtucConfMaxSnrMgn,
             adslAtucConfMinSnrMgn,
             adslAtucConfDownshiftSnrMgn,
             adslAtucConfUpshiftSnrMgn,
             adslAtucConfMinUpshiftTime,
             adslAtucConfMinDownshiftTime,
             adslAtucChanConfFastMinTxRate,
             adslAtucChanConfInterleaveMinTxRate,
             adslAtucChanConfFastMaxTxRate,
             adslAtucChanConfInterleaveMaxTxRate,
             adslAtucChanConfMaxInterleaveDelay,
             adslAturConfRateMode, adslAturConfRateChanRatio,
             adslAturConfTargetSnrMgn, adslAturConfMaxSnrMgn,
             adslAturConfMinSnrMgn, adslAturConfDownshiftSnrMgn,
             adslAturConfUpshiftSnrMgn,
             adslAturConfMinUpshiftTime,
             adslAturConfMinDownshiftTime,
             adslAturChanConfFastMinTxRate,
             adslAturChanConfInterleaveMinTxRate,
             adslAturChanConfFastMaxTxRate,
             adslAturChanConfInterleaveMaxTxRate,
             adslAturChanConfMaxInterleaveDelay
             }
          STATUS     current
          DESCRIPTION
              "A collection of objects providing provisioning
              information about an ADSL Line."
      ::= { adslGroups 10 }

      adslLineAlarmConfProfileGroup OBJECT-GROUP
          OBJECTS {
             adslAtucThresh15MinLofs, adslAtucThresh15MinLoss,
             adslAtucThresh15MinLols, adslAtucThresh15MinLprs,
             adslAtucThresh15MinESs, adslAtucThreshFastRateUp,
             adslAtucThreshInterleaveRateUp,
             adslAtucThreshFastRateDown,
             adslAtucThreshInterleaveRateDown,
             adslAtucInitFailureTrapEnable,
             adslAturThresh15MinLofs, adslAturThresh15MinLoss,
             adslAturThresh15MinLprs, adslAturThresh15MinESs,
             adslAturThreshFastRateUp,
             adslAturThreshInterleaveRateUp,
             adslAturThreshFastRateDown,
             adslAturThreshInterleaveRateDown
             }
          STATUS     current
          DESCRIPTION
              "A collection of objects providing alarm provisioning
              information about an ADSL Line."
      ::= { adslGroups 11 }

      adslLineConfProfileControlGroup OBJECT-GROUP
          OBJECTS {
             adslLineConfProfile, adslLineAlarmConfProfile,
             adslLineConfProfileRowStatus,
             adslLineAlarmConfProfileRowStatus
             }
          STATUS     current
          DESCRIPTION
              "A collection of objects providing profile
              control for the ADSL system."
      ::= { adslGroups 12 }

      adslNotificationsGroup NOTIFICATION-GROUP
          NOTIFICATIONS {
             adslAtucPerfLofsThreshTrap,
             adslAtucPerfLossThreshTrap,
             adslAtucPerfLprsThreshTrap,
             adslAtucPerfESsThreshTrap,
             adslAtucRateChangeTrap,
             adslAtucPerfLolsThreshTrap,
             adslAtucInitFailureTrap,
             adslAturPerfLofsThreshTrap,
             adslAturPerfLossThreshTrap,
             adslAturPerfLprsThreshTrap,
             adslAturPerfESsThreshTrap,
             adslAturRateChangeTrap
             }
          STATUS        current
          DESCRIPTION
              "The collection of adsl notifications."
      ::= { adslGroups 13 }

-- units of conformance for ATU-R agent

         adslAturLineGroup    OBJECT-GROUP
             OBJECTS {
                adslLineCoding
                }
             STATUS     current
             DESCRIPTION
                 "A collection of objects providing configuration
                 information about an ADSL Line on the ATU-R side."
         ::= { adslGroups 14 }

         adslAturPhysicalGroup    OBJECT-GROUP
             OBJECTS {
                adslAtucInvVendorID,
                adslAtucInvVersionNumber,
                adslAtucCurrOutputPwr, adslAtucCurrAttainableRate,
                adslAturInvSerialNumber, adslAturInvVendorID,
                adslAturInvVersionNumber, adslAturCurrSnrMgn,
                adslAturCurrAtn, adslAturCurrStatus,
                adslAturCurrOutputPwr, adslAturCurrAttainableRate,
                adslAtucCurrStatus
                }
             STATUS     current
             DESCRIPTION
                 "A collection of objects providing physical
                 configuration information of the ADSL Line on the
                 ATU-R side."
         ::= { adslGroups 15 }

         adslAturChannelGroup    OBJECT-GROUP
             OBJECTS {
                adslAtucChanInterleaveDelay, adslAtucChanCurrTxRate,
                adslAtucChanPrevTxRate,
                adslAturChanInterleaveDelay, adslAturChanCurrTxRate,
                adslAturChanPrevTxRate, adslAturChanCrcBlockLength
                }
             STATUS     current
             DESCRIPTION
                 "A collection of objects providing configuration
                information about an ADSL channel on the ATU-R
                side."
         ::= { adslGroups 16 }

         adslAturAtucPhysPerfRawCounterGroup OBJECT-GROUP
             OBJECTS {
                adslAtucPerfLofs, adslAtucPerfLoss,
                adslAtucPerfESs, adslAtucPerfInits
                }
             STATUS     current
             DESCRIPTION
                 "A collection of objects providing raw performance
                counts on an ADSL Line (ATU-C end) provided by the
                ATU-R agent."
         ::= { adslGroups 17 }

         adslAturAtucPhysPerfIntervalGroup OBJECT-GROUP
             OBJECTS {
                adslAtucPerfValidIntervals,
                adslAtucPerfInvalidIntervals,
                adslAtucPerfCurr15MinTimeElapsed,
                adslAtucPerfCurr15MinLofs, adslAtucPerfCurr15MinLoss,
                adslAtucPerfCurr15MinESs, adslAtucPerfCurr15MinInits,
                adslAtucPerfCurr1DayTimeElapsed,
                adslAtucPerfCurr1DayLofs, adslAtucPerfCurr1DayLoss,
                adslAtucPerfCurr1DayESs, adslAtucPerfCurr1DayInits,
                adslAtucPerfPrev1DayMoniSecs,
                adslAtucPerfPrev1DayLofs, adslAtucPerfPrev1DayLoss,
                adslAtucPerfPrev1DayESs, adslAtucPerfPrev1DayInits,
                adslAtucIntervalLofs, adslAtucIntervalLoss,
                adslAtucIntervalESs, adslAtucIntervalInits,
                adslAtucIntervalValidData
                }
             STATUS     current
             DESCRIPTION
                 "A collection of objects providing current

                15-minute, 1-day; and previous 1-day performance
                counts on ADSL Line (ATU-C end) provided by the
                ATU-R agent."
         ::= { adslGroups 18 }

         adslAturAturPhysPerfRawCounterGroup OBJECT-GROUP
             OBJECTS {
                adslAturPerfLofs, adslAturPerfLoss,
                adslAturPerfLprs, adslAturPerfESs
                }
             STATUS     current
             DESCRIPTION
                 "A collection of objects providing raw performance
                counts on an ADSL Line (ATU-R end) provided by the
                ATU-R agent."
         ::= { adslGroups 19 }

         adslAturAturPhysPerfIntervalGroup OBJECT-GROUP
             OBJECTS {
                adslAturPerfValidIntervals,
                adslAturPerfInvalidIntervals,
                adslAturPerfCurr15MinTimeElapsed,
                adslAturPerfCurr15MinLofs, adslAturPerfCurr15MinLoss,
                adslAturPerfCurr15MinLprs, adslAturPerfCurr15MinESs,
                adslAturPerfCurr1DayTimeElapsed,
                adslAturPerfCurr1DayLofs, adslAturPerfCurr1DayLoss,
                adslAturPerfCurr1DayLprs, adslAturPerfCurr1DayESs,
                adslAturPerfPrev1DayMoniSecs,
                adslAturPerfPrev1DayLofs, adslAturPerfPrev1DayLoss,
                adslAturPerfPrev1DayLprs, adslAturPerfPrev1DayESs,
                adslAturIntervalLofs,
                adslAturIntervalLoss, adslAturIntervalLprs,
                adslAturIntervalESs, adslAturIntervalValidData
                }
             STATUS     current
             DESCRIPTION
                 "A collection of objects providing current
                15-minute, 1-day; and previous 1-day performance
                counts on ADSL Line (ATU-R end) provided by the
                ATU-R agent."
         ::= { adslGroups 20 }

         adslAturAtucChanPerformanceGroup OBJECT-GROUP
             OBJECTS {
                adslAtucChanReceivedBlks,
                adslAtucChanTransmittedBlks,
                adslAtucChanCorrectedBlks,
                adslAtucChanUncorrectBlks,
                adslAtucChanPerfCurr15MinTimeElapsed,
                adslAtucChanPerfCurr15MinReceivedBlks,
                adslAtucChanPerfCurr15MinTransmittedBlks,
                adslAtucChanPerfCurr15MinCorrectedBlks,
                adslAtucChanPerfCurr15MinUncorrectBlks,
                adslAtucChanPerfCurr1DayTimeElapsed,
                adslAtucChanPerfCurr1DayReceivedBlks,
                adslAtucChanPerfCurr1DayTransmittedBlks,
                adslAtucChanPerfCurr1DayCorrectedBlks,
                adslAtucChanPerfCurr1DayUncorrectBlks,
                adslAtucChanPerfPrev1DayMoniSecs,
                adslAtucChanPerfPrev1DayReceivedBlks,
                adslAtucChanPerfPrev1DayTransmittedBlks,
                adslAtucChanPerfPrev1DayCorrectedBlks,
                adslAtucChanPerfPrev1DayUncorrectBlks,
                adslAtucChanPerfValidIntervals,
                adslAtucChanPerfInvalidIntervals,
                adslAtucChanIntervalReceivedBlks,
                adslAtucChanIntervalTransmittedBlks,
                adslAtucChanIntervalCorrectedBlks,
                adslAtucChanIntervalUncorrectBlks,
                adslAtucChanIntervalValidData
                }
             STATUS     current
             DESCRIPTION
                 "A collection of objects providing channel block
                 performance information on an ADSL channel
                 (ATU-C end) provided by the ATU-R agent."
         ::= { adslGroups 21 }

         adslAturAturChanPerformanceGroup OBJECT-GROUP
             OBJECTS {
                adslAturChanReceivedBlks,
                adslAturChanTransmittedBlks,
                adslAturChanCorrectedBlks,
                adslAturChanUncorrectBlks,
                adslAturChanPerfValidIntervals,
                adslAturChanPerfInvalidIntervals,
                adslAturChanPerfCurr15MinTimeElapsed,
                adslAturChanPerfCurr15MinReceivedBlks,
                adslAturChanPerfCurr15MinTransmittedBlks,
                adslAturChanPerfCurr15MinCorrectedBlks,
                adslAturChanPerfCurr15MinUncorrectBlks,
                adslAturChanPerfCurr1DayTimeElapsed,
                adslAturChanPerfCurr1DayReceivedBlks,
                adslAturChanPerfCurr1DayTransmittedBlks,
                adslAturChanPerfCurr1DayCorrectedBlks,
                adslAturChanPerfCurr1DayUncorrectBlks,
                adslAturChanPerfPrev1DayMoniSecs,
                adslAturChanPerfPrev1DayReceivedBlks,
                adslAturChanPerfPrev1DayTransmittedBlks,
                adslAturChanPerfPrev1DayCorrectedBlks,
                adslAturChanPerfPrev1DayUncorrectBlks,
                adslAturChanIntervalReceivedBlks,
                adslAturChanIntervalTransmittedBlks,
                adslAturChanIntervalCorrectedBlks,
                adslAturChanIntervalUncorrectBlks,
                adslAturChanIntervalValidData
                }
             STATUS     current
             DESCRIPTION
                 "A collection of objects providing channel block
                 performance information on an ADSL channel
                 (ATU-R end) provided by the ATU-R agent."
         ::= { adslGroups 22 }

         adslAturLineAlarmConfProfileGroup OBJECT-GROUP
             OBJECTS {
                adslAtucThresh15MinLofs, adslAtucThresh15MinLoss,
                adslAtucThresh15MinESs, adslAtucThreshFastRateUp,
                adslAtucThreshInterleaveRateUp,
                adslAtucThreshFastRateDown,
                adslAtucThreshInterleaveRateDown,
                adslAtucInitFailureTrapEnable,
                adslAturThresh15MinLofs, adslAturThresh15MinLoss,
                adslAturThresh15MinLprs, adslAturThresh15MinESs,
                adslAturThreshFastRateUp,
                adslAturThreshInterleaveRateUp,
                adslAturThreshFastRateDown,
                adslAturThreshInterleaveRateDown
                }
             STATUS     current
             DESCRIPTION
                 "A collection of objects providing alarm
provisioning
                 information about an ADSL Line provided by the
                 ATU-R agent."
         ::= { adslGroups 23 }

         adslAturLineConfProfileControlGroup OBJECT-GROUP
             OBJECTS {
                adslLineAlarmConfProfile,
                adslLineAlarmConfProfileRowStatus
                }
             STATUS     current
             DESCRIPTION
                 "A collection of objects providing profile
                 control for the ADSL system by the ATU-R agent."
         ::= { adslGroups 24 }

         adslAturNotificationsGroup NOTIFICATION-GROUP
             NOTIFICATIONS {
                 adslAtucPerfLofsThreshTrap,
                 adslAtucPerfLossThreshTrap,
                 adslAtucPerfESsThreshTrap,
                 adslAtucRateChangeTrap,
                 adslAturPerfLofsThreshTrap,
                 adslAturPerfLossThreshTrap,
                 adslAturPerfLprsThreshTrap,
                 adslAturPerfESsThreshTrap,
                 adslAturRateChangeTrap
                 }
             STATUS        current
             DESCRIPTION
                 "The collection of ADSL notifications implemented by
                 the ATU-R agent."
         ::= { adslGroups 25 }

END